Linux version 2.6.23-smp (root@nycjv321-SLD) (gcc version 4.1.2) #2 SMP Mon Nov 12 07:09:10 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable) BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS) BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 247MB LOWMEM available. found SMP MP-table at 000f5eb0 Entering add_active_range(0, 0, 63472) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 63472 HighMem 63472 -> 63472 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 63472 On node 0 totalpages: 63472 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 463 pages used for memmap Normal zone: 58913 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F7D50, F7F3000 (r2 IntelR) ACPI Warning (tbutils-0453): BIOS XSDT has NULL entry,using RSDT [20070126] ACPI: RSDT 0F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 1) ACPI: FACP 0F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 1) ACPI: DSDT 0F7F30C0, 3971 (r1 INTELR AWRDACPI 1000 MSFT 100000D) ACPI: FACS 0F7F0000, 0040 ACPI: APIC 0F7F6A40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 1) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 10000000 (gap: 0f800000:ef400000) Built 1 zonelists in Zone order. Total pages: 62977 Kernel command line: BOOT_IMAGE=Linux ro root=301 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 2600.055 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 243588k/253888k available (5125k kernel code, 9840k reserved, 1583k data, 284k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB) lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB) .init : 0xc0796000 - 0xc07dd000 ( 284 kB) .data : 0xc06014fc - 0xc078d33c (1583 kB) .text : 0xc0100000 - 0xc06014fc (5125 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5204.50 BogoMIPS (lpj=10409006) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 22k freed ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Total of 1 processors activated (5204.50 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs xor: automatically using best checksumming function: pIII_sse pIII_sse : 3366.000 MB/sec xor: using function: pIII_sse (3366.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb970, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved PCI: Bridge: 0000:00:1e.0 IO window: 9000-afff MEM window: ec000000-edffffff PREFETCH window: 10000000-100fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 98304 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NTFS driver 2.1.28 [Flags: R/W]. JFS: nTxBlock = 1903, nTxLock = 15230 SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem OCFS2 1.3.3 OCFS2 Node Manager 1.3.3 OCFS2 DLM 1.3.3 OCFS2 DLMFS 1.3.3 OCFS2 User DLM kernel interface loaded GFS2 (built Nov 11 2007 21:33:36) installed async_tx: api initialized (async) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Switched to high resolution mode on CPU 0 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y080P0, ATA DISK drive hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive hdd: LITE-ON DVDRW LH-20A1H, ATAPI CD/DVD-ROM drive hdc: selected mode 0x42 hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33 hdd: selected mode 0x42 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide Loading iSCSI transport class v2.0-724. st: Version 20070203, fixed bufsize 32768, s/g segs 256 I2O subsystem v1.325 i2o: max drivers = 8 I2O Configuration OSM v1.323 I2O Bus Adapter OSM v1.317 I2O Block Device OSM v1.325 I2O SCSI Peripheral OSM v1.316 I2O ProcFS OSM v1.316 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 Fusion MPT FC Host driver 3.04.05 Fusion MPT SAS Host driver 3.04.05 ACPI: PCI Interrupt 0000:01:0d.0[A] -> GSI 23 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[ed002000-ed0027ff] Max Packet=[2048] IR/IT contexts=[4/8] usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xee080000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000b800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 725 MB/s raid6: int32x2 746 MB/s raid6: int32x4 679 MB/s raid6: int32x8 494 MB/s raid6: mmxx1 2115 MB/s raid6: mmxx2 2715 MB/s raid6: sse1x1 1158 MB/s raid6: sse1x2 2389 MB/s raid6: sse2x1 1879 MB/s raid6: sse2x2 2940 MB/s raid6: using algorithm sse2x2 (2940 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: multipath personality registered for level -4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 284k freed ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00005b0032] Linux agpgart interface v0.102 iTCO_vendor_support: vendor-support=0 i810_smbus 0000:00:02.0: i810/i815 i2c device found. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20 agpgart: Detected an Intel 830M Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe0000000 intel_rng: FWH not detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 processor: Unknown symbol acpi_bus_generate_proc_event processor: Unknown symbol acpi_bus_generate_proc_event processor: Unknown symbol acpi_bus_generate_proc_event thermal: Unknown symbol acpi_bus_generate_proc_event thermal: Unknown symbol acpi_processor_set_thermal_limit button: Unknown symbol acpi_bus_generate_proc_event button: Unknown symbol acpi_bus_generate_proc_event 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 23 (level, low) -> IRQ 17 eth0: RealTek RTL8139 at 0xa000, 00:0c:76:fe:65:70, IRQ 17 eth0: Identified 8139 chip type 'RTL-8101' gameport: EMU10K1 is pci0000:01:0a.1/gameport0, io 0x9400, speed 962kHz ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 22 (level, low) -> IRQ 21 Adding 499928k swap on /dev/hda5. Priority:-1 extents:1 across:499928k EXT3 FS on hda1, internal journal input: PC Speaker as /devices/platform/pcspkr/input/input2 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3 parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). lp0: console ready Capability LSM initialized kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. processor: Unknown symbol acpi_bus_generate_proc_event thermal: Unknown symbol acpi_bus_generate_proc_event thermal: Unknown symbol acpi_processor_set_thermal_limit processor: Unknown symbol acpi_bus_generate_proc_event button: Unknown symbol acpi_bus_generate_proc_event processor: Unknown symbol acpi_bus_generate_proc_event button: Unknown symbol acpi_bus_generate_proc_event eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5