Initializing interface 'ipw0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=15):
     4e 65 74 70 6c 61 6e 57 69 72 65 46 72 65 65      NetplanWireFree 
PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='NetplanWireFree'
Initializing interface (2) 'ipw0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:04:23:60:38:95
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface ipw0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:90:4c:91:00:01 ssid='NetplanWireFree' wpa_ie_len=26 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:90:4c:91:00:01 (SSID='NetplanWireFree' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
wpa_driver_bsd_set_auth_alg alg 0x1 authmode 1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'NetplanWireFree' wpa ie len 24 pairwise 2 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface ipw0
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
Cancelling scan request