Linux version 2.6.22-suspend2-r2 (root@jerktop) (gcc version 4.1.2 (Gentoo 4.1.2)) #7 SMP Fri Nov 23 19:33:50 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000004ff60000 (usable) BIOS-e820: 000000004ff60000 - 000000004ff77000 (ACPI data) BIOS-e820: 000000004ff77000 - 000000004ff79000 (ACPI NVS) BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 383MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 327520) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 327520 early_node_map[1] active PFN ranges 0: 0 -> 327520 On node 0 totalpages: 327520 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 766 pages used for memmap HighMem zone: 97378 pages, LIFO batch:31 DMI present. ACPI: RSDP 000F6D70, 0024 (r2 IBM ) ACPI: XSDT 4FF6A6BD, 004C (r1 IBM TP-1R 3210 LTP 0) ACPI: FACP 4FF6A800, 00F4 (r3 IBM TP-1R 3210 IBM 1) ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 4FF6A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E) ACPI: FACS 4FF78000, 0040 ACPI: SSDT 4FF6A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E) ACPI: ECDT 4FF76ECC, 0052 (r1 IBM TP-1R 3210 IBM 1) ACPI: TCPA 4FF76F1E, 0032 (r1 IBM TP-1R 3210 PTL 1) ACPI: BOOT 4FF76FD8, 0028 (r1 IBM TP-1R 3210 LTP 1) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 60000000 (gap: 50000000:af800000) Built 1 zonelists. Total pages: 324962 Kernel command line: root=/dev/hda5 resume2=swap:/dev/hda3 noresume2 video=vesafb:ywrap,mtrr:2,1280x1024-24@60 splash=silent,fadein,verbose,theme:natural_gentoo quiet CONSOLE=/dev/tty1 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01a10000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1594.885 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1291484k/1310080k available (3306k kernel code, 17264k reserved, 1537k data, 288k init, 392576k highmem) virtual kernel memory layout: fixmap : 0xffe17000 - 0xfffff000 (1952 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05c3000 - 0xc060b000 ( 288 kB) .data : 0xc043a879 - 0xc05bb02c (1537 kB) .text : 0xc0100000 - 0xc043a879 (3306 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3191.90 BogoMIPS (lpj=6383810) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1343 Objects with 64 Devices 403 Methods 19 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 1 Objects with 0 Devices 1 Methods 0 Regions tbxface-0587 [02] tb_load_namespace : ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0091 [02] enable : Transition to ACPI mode successful CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs Device driver platform lacks bus and class support for being resumed. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0952 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:............................................................................................................................................................................................................................................................ Initialized 18/19 Regions 123/123 Fields 72/72 Buffers 39/46 Packages (1353 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:......... Executed 9 _INI methods requiring 2 _STA executions (examined 68 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Device driver pci0000:00 lacks bus and class support for being resumed. PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init Device driver pnp0 lacks bus and class support for being resumed. ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs USB driver usbfs lacks resume support. usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: c0100000-c01fffff PREFETCH window: e0000000-e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: e8000000-ebffffff MEM window: c4000000-c7ffffff PCI: Bus 7, cardbus bridge: 0000:02:00.1 IO window: 00004800-000048ff IO window: 00004c00-00004cff PREFETCH window: ec000000-efffffff MEM window: c8000000-cbffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-8fff MEM window: c0200000-cfffffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Boot video device is 0000:01:00.0 Real Time Clock Driver v1.12ac intel_rng: FWH not detected Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz radeonfb: PLL min 20000 max 35000 Device driver i2c-0 lacks bus and class support for being resumed. Device driver i2c-1 lacks bus and class support for being resumed. Device driver i2c-2 lacks bus and class support for being resumed. Device driver i2c-3 lacks bus and class support for being resumed. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. Switched to high resolution mode on CPU 0 i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. Non-DDC laptop panel detected i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SXGA+ Single (85MHz) radeonfb: detected LVDS panel size from BIOS: 1400x1050 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled radeonfb: IBM Thinkpad R50/R51/T40/T41 detected, enabling workaround Console: switching to colour frame buffer device 175x65 radeonfb (0000:01:00.0): ATI Radeon Lf vesafb: ATI Technologies Inc., M9 , 01.00 (OEM: ATI MOBILITY RADEON 9000) vesafb: VBE version: 2.0 vesafb: protected mode interface info at c000:5853 vesafb: pmi: set display start = c00c58c1, set palette = c00c58fb vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 vesafb: no monitor limits have been set vesafb: scrolling: ywrap using protected mode interface, yres_virtual=3062 vesafb: cannot reserve video memory at 0xe0000000 mtrr: type mismatch for e0000000,1000000 old: write-combining new: write-back mtrr: type mismatch for e0000000,800000 old: write-combining new: write-back mtrr: type mismatch for e0000000,400000 old: write-combining new: write-back mtrr: type mismatch for e0000000,200000 old: write-combining new: write-back mtrr: type mismatch for e0000000,100000 old: write-combining new: write-back mtrr: type mismatch for e0000000,80000 old: write-combining new: write-back mtrr: type mismatch for e0000000,40000 old: write-combining new: write-back mtrr: type mismatch for e0000000,20000 old: write-combining new: write-back mtrr: type mismatch for e0000000,10000 old: write-combining new: write-back mtrr: type mismatch for e0000000,8000 old: write-combining new: write-back mtrr: type mismatch for e0000000,4000 old: write-combining new: write-back mtrr: type mismatch for e0000000,2000 old: write-combining new: write-back mtrr: type mismatch for e0000000,1000 old: write-combining new: write-back vesafb: framebuffer at 0xe0000000, mapped to 0xf9900000, using 11484k, total 32704k fb1: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Marking TSC unstable due to: possible TSC halt in C2. ACPI: Thermal Zone [THM0] (51 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Time: acpi_pm clocksource has been installed. pnp: Device 00:0a activated. 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:00:1f.6 disabled Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded thinkpad_acpi: ThinkPad ACPI Extras v0.14 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad EC firmware 1RHT71WW-3.04 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:77:4e:a4 Device driver eth0 lacks bus and class support for being resumed. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Device driver lo lacks bus and class support for being resumed. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N040ATCS05-0, ATA DISK drive Device driver ide0 lacks bus and class support for being resumed. Clocksource tsc unstable (delta = -279702841 ns) hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: UJDA765 DVD/CDRW, ATAPI CD/DVD-ROM drive Device driver ide1 lacks bus and class support for being resumed. hdc: selected mode 0x42 ide1 at 0x170-0x177,0x376 on irq 15 PCI driver PIIX_IDE lacks driver specific resume support. hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PCI driver aic7xxx lacks driver specific resume support. PCI driver aic79xx lacks driver specific resume support. 3ware Storage Controller device driver for Linux v1.26.02.002. PCI driver 3w-xxxx lacks driver specific resume support. Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 usbmon: debugfs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Device driver usbdev1.1_ep00 lacks bus and class support for being resumed. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Device driver usbdev1.1_ep81 lacks bus and class support for being resumed. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 Device driver usbdev2.1_ep00 lacks bus and class support for being resumed. usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Device driver usbdev2.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 Device driver usbdev3.1_ep00 lacks bus and class support for being resumed. usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Device driver usbdev3.1_ep81 lacks bus and class support for being resumed. ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 Device driver usbdev4.1_ep00 lacks bus and class support for being resumed. usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Device driver usbdev4.1_ep81 lacks bus and class support for being resumed. usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 hdaps: IBM ThinkPad T41 detected. Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 hdaps: initial latch check good (0x01). hdaps: device successfully initialized. input: hdaps as /class/input/input5 hdaps: driver successfully loaded. usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC). ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55274 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at irq 11 oprofile: using timer interrupt. IPv4 over IPv4 tunneling driver Device driver tunl0 lacks bus and class support for being resumed. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver Device driver sit0 lacks bus and class support for being resumed. NET: Registered protocol family 17 Using IPI No-Shortcut mode Suspend v2.2.10 Suspend2 Userspace Storage Manager support registered. Suspend2 Basic User Interface support registered. Suspend2 Compressor support registered. Suspend2 Block I/O support registered. Suspend2 Swap Allocator support registered. Suspend2 File Allocator support registered. Suspend2 Userspace UI support registered. IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input6 No storage allocator is currently active. Rechecking whether we can use one. Suspend2: SwapAllocator: Signature found. Suspend2: Resuming enabled. Suspend2: Normal swapspace found. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xd0000000 ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0k ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Device driver 0000:02:02.0 lacks bus and class support for being resumed. Device driver eth1 lacks bus and class support for being resumed. ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt: registered algorithm 'CCMP' [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.27.0 20060524 on minor 0 ReiserFS: hda6: found reiserfs format "3.6" with standard journal ReiserFS: hda6: using ordered data mode ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda6: checking transaction log (hda6) ReiserFS: hda6: Using r5 hash to sort names ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names ReiserFS: hda9: found reiserfs format "3.6" with standard journal ReiserFS: hda9: using ordered data mode ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda9: checking transaction log (hda9) ReiserFS: hda9: Using r5 hash to sort names Adding 2003392k swap on /dev/hda3. Priority:-1 extents:1 across:2003392k ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth1: no IPv6 routers present