Linux version 2.6.22.6 (root@lapi) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #19 SMP Mon Nov 26 16:07:41 EET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f680000 (usable) BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6d60 Entering add_active_range(0, 0, 259712) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259712 early_node_map[1] active PFN ranges 0: 0 -> 259712 On node 0 totalpages: 259712 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 237 pages used for memmap HighMem zone: 30099 pages, LIFO batch:7 DMI present. ACPI: RSDP 000F6CB0, 0024 (r2 ACRSYS) ACPI: XSDT 3F686E3C, 0084 (r1 ACRSYS ACRPRDCT 6040000 LTP 0) ACPI: APIC 3F68DC04, 0068 (r1 Acer Acadia 6040000 LOHR 5A) ACPI: HPET 3F68DC6C, 0038 (r1 Acer Acadia 6040000 LOHR 5A) ACPI: MCFG 3F68DCA4, 003C (r1 Acer Acadia 6040000 LOHR 5A) ACPI: SLIC 3F68DCE0, 0176 (r1 ACRSYS ACRPRDCT 6040000 LOHR 0) ACPI: DBGP 3F68DE56, 0034 (r1 Acer Acadia 6040000 LOHR 0) ACPI: FACP 3F68DE8A, 00F4 (r3 Acer Acadia 6040000 LOHR 1) ACPI: DSDT 3F687CB7, 5ED9 (r1 Acer CALISTGA 6040000 INTL 20060608) ACPI: FACS 3F68EFC0, 0040 ACPI: APIC 3F68DF7E, 005A (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3F68DFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT 3F687AAD, 020A (r1 SataRe SataAhci 1000 INTL 20050228) ACPI: SSDT 3F6875EB, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228) ACPI: SSDT 3F68738C, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) ACPI: SSDT 3F686EC0, 04CC (r1 PmRef CpuPm 3000 INTL 20050228) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists. Total pages: 257683 Kernel command line: root=/dev/sda1 ro vga=791 psmouse.proto=exps mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1596.039 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1025788k/1038848k available (2039k kernel code, 12400k reserved, 792k data, 280k init, 121344k highmem) virtual kernel memory layout: fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03ca000 - 0xc0410000 ( 280 kB) .data : 0xc02fdc61 - 0xc03c3ee4 ( 792 kB) .text : 0xc0100000 - 0xc02fdc61 (2039 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3195.56 BogoMIPS (lpj=6391130) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz stepping 06 Total of 1 processors activated (3195.56 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 NET: Registered protocol family 8 NET: Registered protocol family 20 pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: d0000000-d00fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: d0100000-d01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: d0200000-d02fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0006) PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found intel_rng: FWH not detected iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 Linux agpgart interface v0.102 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize GDT-HA: Storage RAID Controller Driver. Version: 3.05 GDT-HA: Found 0 PCI Storage RAID Controllers nsp32: loading... SCSI Media Changer driver v0.25 ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xf882a500 ctl 0x00000000 bmdma 0x00000000 irq 220 ata2: SATA max UDMA/133 cmd 0xf882a580 ctl 0x00000000 bmdma 0x00000000 irq 220 ata3: SATA max UDMA/133 cmd 0xf882a600 ctl 0x00000000 bmdma 0x00000000 irq 220 ata4: SATA max UDMA/133 cmd 0xf882a680 ctl 0x00000000 bmdma 0x00000000 irq 220 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: TOSHIBA MK8037GSX, DL250J, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL25 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.11 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00015090 irq 14 ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00015098 irq 15 ata5.00: ATAPI: Slimtype DVD A DS8A1P, CA11, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A1P CA11 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 sr 4:0:0:0: Attached scsi generic sg1 type 5 usbmon: debugfs is not available drivers/usb/misc/idmouse.c: Siemens ID Mouse FingerTIP Sensor Driver 0.6 usbcore: registered new interface driver idmouse PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver appletouch input: AT Translated Set 2 keyboard as /class/input/input0 input: ImPS/2 Generic Wheel Mouse as /class/input/input1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 tg3.c:v3.77 (May 31, 2007) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 USB Universal Host Controller Interface driver v3.0 eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:e4:ad:ea eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 19, io base 0x000050a0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Real Time Clock Driver v1.12ac ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x000050c0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman bcm43xx driver ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x000050e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 20, io base 0x00005400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0644000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected sdhci: SDHCI controller found at 0000:06:00.1 [1524:0750] (rev 0) sdhci [sdhci_probe()]: found 1 slot(s) PCI: Enabling device 0000:06:00.1 (0000 -> 0002) ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 20 (level, low) -> IRQ 21 sdhci [sdhci_probe_slot()]: slot 0 at 0xd0200400, irq 21 PCI: Setting latency timer of device 0000:06:00.1 to 64 sdhci: ============== REGISTER DUMP ============== sdhci: Sys addr: 0x00000000 | Version: 0x00000100 sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci: Present: 0x01f20000 | Host ctl: 0x00000000 sdhci: Power: 0x00000000 | Blk gap: 0x00000000 sdhci: Wake-up: 0x00000000 | Clock: 0x00000000 sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci: Int enab: 0x00ff00fb | Sig enab: 0x00ff00fb sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci: Caps: 0x01e021a1 | Max curr: 0x000000ff sdhci: =========================================== mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 mmc0: SDHCI at 0xd0200400 irq 21 DMA mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0 mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 mmc0: clock 128906Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 mmc0: starting CMD0 arg 00000000 flags 00000040 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (0) mmc0: req done (CMD0): 1/0/0: 00000000 00000000 00000000 00000000 PCI: Setting latency timer of device 0000:05:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 mmc0: starting CMD8 arg 000001aa flags 00000075 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (8) mmc0: req done (CMD8): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000075 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37) mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000075 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37) mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000075 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37) mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: starting CMD55 arg 00000000 flags 00000075 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (37) mmc0: req done (CMD55): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: starting CMD1 arg 00000000 flags 00000061 sdhci [sdhci_tasklet_finish()]: Ending request, cmd (1) mmc0: req done (CMD1): 1/0/0: 00000000 00000000 00000000 00000000 mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k EXT3 FS on sda1, internal journal loop: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 40100506, writing 40100106) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (on-line) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input3 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] Marking TSC unstable due to: possible TSC halt in C2. Time: hpet clocksource has been installed. ACPI: Thermal Zone [TZ00] (54 C) ACPI: Thermal Zone [TZ01] (54 C) PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100506, writing 40100106) [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [drm] Initialized i915 1.6.0 20060119 on minor 0 bcm43xx: PHY connected bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 32-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) ADDRCONF(NETDEV_UP): wlan0: link is not ready Clocksource tsc unstable (delta = -364188656 ns) ieee80211_crypt: registered algorithm 'WEP' bcm43xx: set security called, .active_key = 0, .level = 1, .enabled = 1, .encrypt = 1 SoftMAC: Open Authentication completed with 00:14:7f:2e:05:65 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present