ots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xDE84ED00 ctl 0x0 bmdma 0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xDE84ED80 ctl 0x0 bmdma 0x0 irq 11
ata3: SATA max UDMA/133 cmd 0xDE84EE00 ctl 0x0 bmdma 0x0 irq 11
ata4: SATA max UDMA/133 cmd 0xDE84EE80 ctl 0x0 bmdma 0x0 irq 11
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 8
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI, max UDMA/100
ata2.00: configured for UDMA/100
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: WDC WD800JD-75MS  Rev: 10.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: HL-DT-ST  Model: CDRW/DVD GCCH10N  Rev: C103
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Probing IDE interface ide0...
Probing IDE interface ide1...
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.101 (c) Dave Jones
input: PC Speaker as /class/input/input1
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x60 (internal error)
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:14.2[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ata2: soft resetting port
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x54 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x54 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
Adding 497972k swap on /dev/sda1.  Priority:-1 extents:1 across:497972k
EXT3 FS on sda2, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [VBTN]
b44: eth1: Link is up at 100 Mbps, full duplex.
b44: eth1: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present