ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x20 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
ata2.00: (irq_stat 0x40000001)
ata2.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x54 (internal error)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
Adding 497972k swap on /dev/sda1.  Priority:-1 extents:1 across:497972k
EXT3 FS on sda2, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [VBTN]
b44: eth1: Link is up at 100 Mbps, full duplex.
b44: eth1: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present