root@thrakkorzog:~/gllin$ lib/ld-linux.so.2 --library-path /home/root/gllin/lib:/home/root/gllin/usr/lib /home/root/gllin/gllin.real -h
ERROR: incorrect parameter: -h
**********************************************************************************
Usage:

-help                    Help
-board <type>            Defines board type    Ex: '-board matchbox'
                         supported: matchbox, trident
-com <com port>          GPS com port;         Ex: '-com com6'
-baud <baud rate>        Set baud rate;        Ex: '-baud 115200'
-rft <RF type>           Set RF type;          Ex: '-rft RF_LN22OUT'
-freq <freq plan> | ?    set frequency plan for GPS or show the list of all available plans
                         Ex: '-freq FRQ_PLAN_OCXO_10000'
                         Ex: '-freq ?' -- Show all available plans
-g <URL>                 SUPL Server URL or IP address;
                         Ex: '-g 216.15.9.46'
-p <port>                SUPL Server port number;
                         Ex: '-p 9118'
-udp <port>              Local UDP port to send NMEA to.
                         '-udp 6000'      [default]
-gsm_cell <cell ID>      set GSM Cell ID information
                         cell ID has the following format: '<MCC>.<MNC>.<LAC>.<CI>'
                         Where:
                               MCC - Mobile Country Code
                               MNC - Mobile Network Code
                               LAC - Location Area Code
                               CI  - Cell Identification
                         Ex: '-gsm_cell 310.170.367.25732'
-set_assisted_off        disable SET assisted capability
-set_based_off           disable SET based capability
-msisdn <MSISDN>         set value for MSISDN (international phone number) as SET id
                         Ex: '-msisdn 14081234567'
-nai <nai>               specify Network Access Identifier as SET id
                         Ex: '-nai 12345@mywebsite.com'
-periodic <s>            make periodic request every s second (-1 to 64)
                         -1  single shot: perform one fix, then quit
                          0       native: perform fixes as fast as possible
                         <s>       timed: report a position every <s> seconds
                                          where <s> is 1 to 64
-recover                 recover GLLIN after signaled exit
-low [<count>]           low level test.  Default <count> is 1
-low_debug               Low level debug ON
+low_debug               Low level debug OFF
-train <count>           Send train data <count> times
+pty | -pty              Enable or disable NMEA output to pty "/tmp/nmeaPTY"
                         Default is off [-pty]
+np | -np                Enable or disable NMEA output to named pipe "/tmp/nmeaNP"
                         Default is on [-np]
+nmea | -nmea            Enable or disable NMEA output to log file
                         Default is off [-nmea]
+daemon | -daemon        Become a daemon (or not)
                         Default is -daemon
-a2 | -a3 | -a0          Select a GTA01 board revision.  Default is a3
-batch <st> <n> <fix>    perform batch test of <n> starts of type <st>
                         <st> is hot, warm, cold, or SNR.
                         Each start has <fix> fixes.
-i                       start GLLIN command line
+pnd                     optimize for PND
-pnd                     look for low signal strength signals
+sim                     using simulator so don't use almanac
-sim                     not using simulator
SNR                      manufacturing SNR test mode
hot                      hot start [default]
warm                     warm start
cold                     cold start
-v[n]                    Report GLLIN version string.
                         n is 1234 to report selected versions.
 version 1.1.7
**********************************************************************************