nected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) eth1: Link is up at 100 Mbps, full-duplex. eth1: Pause is disabled usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 1 usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 1 eth1: suspending, WakeOnLan disabled bcm43xx: Suspending... bcm43xx: Device suspended. radeonfb (0000:00:10.0): suspending to state: 2... uninorth-agp: disabling AGP on device 0000:00:10.0 uninorth-agp: disabling AGP on bridge 0000:00:0b.0 radeonfb (0000:00:10.0): resuming from state: 2... PCI: Enabling device 0000:00:10.0 (0000 -> 0003) agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode bcm43xx: Resuming... PCI: Enabling device 0001:10:12.0 (0000 -> 0002) PM: Writing back config space on device 0001:10:12.0 at offset f (was 100, writing 134) PM: Writing back config space on device 0001:10:12.0 at offset 4 (was 0, writing 80084000) PM: Writing back config space on device 0001:10:12.0 at offset 3 (was 0, writing 1000) PM: Writing back config space on device 0001:10:12.0 at offset 1 (was 100002, writing 100006) bcm43xx: Device resumed. PCI: Enabling device 0001:10:1b.0 (0000 -> 0002) PCI: Enabling device 0001:10:1b.1 (0000 -> 0002) PCI: Enabling device 0001:10:1b.2 (0000 -> 0002) PM: Writing back config space on device 0001:10:1b.2 at offset 1 (was 2100006, writing 2100016) eth1: resuming PHY ID: 4061e4, addr: 0 hda: Enabling Ultra DMA 5 hdc: Enabling MultiWord DMA 2 ohci_hcd 0001:10:1b.1: wakeup adb: starting probe task... eth1: Link is up at 100 Mbps, full-duplex. eth1: Pause is disabled agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode [drm] Loading R200 Microcode adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f ADB keyboard at 2, handler 1 ADB mouse at 3, handler set to 4 (trackpad) adb: finished probe task... bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) usb 3-1: USB disconnect, address 2 ohci_hcd 0001:10:1b.1: wakeup eth1: no IPv6 routers present bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 eth1: Link is up at 100 Mbps, full-duplex. eth1: Pause is disabled hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? hub 3-0:1.0: Cannot enable port 1. Maybe the USB cable is bad? eth1: no IPv6 routers present bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0050770e10004990] sd 0:0:0:0: rejecting I/O to device being removed xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 Filesystem "sda5": I/O Error Detected. Shutting down filesystem: sda5 Please umount the filesystem, and rectify the problem(s) xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 sd 0:0:0:0: rejecting I/O to device being removed xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 Filesystem "sda3": I/O Error Detected. Shutting down filesystem: sda3 Please umount the filesystem, and rectify the problem(s) xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 xfs_force_shutdown(sda5,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 scsi 0:0:0:0: rejecting I/O to dead device Buffer I/O error on device sda1, logical block 0 lost page write due to I/O error on sda1 xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 xfs_force_shutdown(sda3,0x1) called from line 424 of file fs/xfs/xfs_rw.c. Return address = 0xeaff4da0 ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0050770e10004990] scsi2 : SBP-2 IEEE-1394 ieee1394: sbp2: Error logging into SBP-2 device - login timed-out sbp2: probe of 0050770e10004990-0 failed with error -16 usb 4-1: new high speed USB device using ehci_hcd and address 5 usb 4-1: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: WDC WD60 Model: 0UE-00HCT0 Rev: 09.0 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 14 00 00 sda: assuming drive cache: write through SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 14 00 00 sda: assuming drive cache: write through sda: [mac] sda1 sda2 sda3 sda4 sd 3:0:0:0: Attached scsi disk sda usb-storage: device scan complete hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Node suspended: ID:BUS[0-00:1023] GUID[0050770e10004990] ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 ieee1394: Node resumed: ID:BUS[0-00:1023] GUID[0050770e10004990] scsi4 : SBP-2 IEEE-1394 ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: SAMSUNG Model: SP1604N Rev: Type: Direct-Access-RBC ANSI SCSI revision: 04 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 13 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 13 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > sd 4:0:0:0: Attached scsi disk sdb hfs: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. XFS mounting filesystem sdb5 Ending clean XFS mount for filesystem: sdb5 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! XFS mounting filesystem sdb3 Ending clean XFS mount for filesystem: sdb3 hfs: write access to a jounaled filesystem is not supported, use the force option at your own risk, mounting read-only. bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) ohci_hcd 0001:10:1b.1: wakeup usb 3-1: new low speed USB device using ohci_hcd and address 7 usb 3-1: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input7 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0001:10:1b.1-1 bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2)