# dmesg Linux version 2.6.22-gentoo-r8-shal3r (root@rush.lv) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #7 SMP PREEMPT Fri Oct 19 19:25:47 EEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000ceee0000 (usable) BIOS-e820: 00000000ceee0000 - 00000000ceee3000 (ACPI NVS) BIOS-e820: 00000000ceee3000 - 00000000ceef0000 (ACPI data) BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved) BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) 3968MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5980 NX (Execute Disable) protection: active Entering add_active_range(0, 0, 1245184) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1245184 early_node_map[1] active PFN ranges 0: 0 -> 1245184 On node 0 totalpages: 1245184 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 7936 pages used for memmap HighMem zone: 1007872 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 15:3 APIC version 17 Processor #1 15:3 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists. Total pages: 1235456 Kernel command line: auto BOOT_IMAGE=Gentoonotsc root=801 panic=10 notsc notsc: Kernel compiled with CONFIG_X86_TSC, cannot disable TSC. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2805.970 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4131316k/4980736k available (2414k kernel code, 44328k reserved, 1200k data, 228k init, 3259264k highmem) virtual kernel memory layout: fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc048e000 - 0xc04c7000 ( 228 kB) .data : 0xc035b903 - 0xc0487ac4 (1200 kB) .text : 0xc0100000 - 0xc035b903 (2414 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5617.85 BogoMIPS (lpj=9358175) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 12k freed CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5613.18 BogoMIPS (lpj=9352293) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Total of 2 processors activated (11230.04 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 2 CPUs migration_cost=3333 NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf2060, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources SCSI subsystem initialized libata version 2.21 loaded. PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:10.0 PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router default [10de/02f0] at 0000:00:00.0 PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5 PCI->APIC IRQ transform: 0000:01:08.0[A] -> IRQ 10 PCI: Bridge: 0000:00:10.0 IO window: d000-dfff MEM window: fdd00000-fddfffff PREFETCH window: fde00000-fdefffff PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. microcode: CPU0 not a capable Intel processor microcode: CPU1 not a capable Intel processor IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:00:05.0 Real Time Clock Driver v1.12ac Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ns83820.c: National Semiconductor DP83820 10/100/1000 driver. sk98lin: driver has been replaced by the skge driver and is scheduled for removal forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. r8169 Gigabit Ethernet driver 2.2LK loaded eth0: RTL8169s/8110s at 0xf8800000, 00:17:9a:38:53:40, IRQ 10 netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 161 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hdb: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hdb: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 sata_nv 0000:00:0e.0: version 3.4 PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 5 ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 5 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133 ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk Fusion MPT base driver 3.04.04 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.04 Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 228k freed r8169: eth0: link up UDP: short packet: From 58.213.116.130:28798 15000/33 to 195.244.128.237:12053 UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 20013/55 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 48948/35 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/39 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/37 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/46 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/43 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 6159/45 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/38 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 54981/47 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 15651/45 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/36 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 11766/47 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/45 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/40 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 106/44 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/46 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/42 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/47 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/39 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/49 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/49 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/51 to 195.244.128.237:27015 UDP: short packet: From 78.84.187.211:27005 0/44 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/46 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/40 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/39 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 53233/54 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/44 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 35992/48 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/47 to 195.244.128.237:27015 UDP: short packet: From 84.237.169.150:27005 0/36 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 50252/36 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/41 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/37 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/38 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/44 to 195.244.128.237:27015 UDP: short packet: From 84.237.205.227:27005 0/44 to 195.244.128.237:27015