My wpa_supplicant.conf

network={
ssid="laundry"
scan_ssid=1
group=TKIP
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
psk="myverysecurekey"
priority=1
}
After wpa_supplicant -dd -Dndiswrapper -c/etc/wpa_supplicant.conf -iwlan0

wpa_supplicant: no process killed
Initializing interface 'wlan0' conf '/home/ele/programitas/configuracioncita' driver 'ndiswrapper' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/ele/programitas/configuracioncita' -> '/home/ele/programitas/configuracioncita'
Reading configuration file '/home/ele/programitas/configuracioncita'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=7):
     6c 61 75 6e 64 72 79                              laundry
scan_ssid=1 (0x1)
group: 0x8
key_mgmt: 0x2
pairwise: 0x8
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
priority=1 (0x1)
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 1
   id=0 ssid='laundry'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
ioctl[SIOCSIWPMKSA]: Invalid argument
SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xd
  capabilities: key_mgmt 0x5 enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:14:a5:10:08:87
Driver does not support WPA.
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
Setting scan request: 0 sec 100000 usec
Added interface wlan0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     6c 61 75 6e 64 72 79                              laundry
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 519 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:13:46:3f:93:06 ssid='laundry' wpa_ie_len=28 rsn_ie_len=26 caps=0x11
   selected based on RSN IE
Trying to associate with 00:13:46:3f:93:06 (SSID='laundry' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 01 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: added PMKSA cache candidate 00:13:46:3f:93:06 prio 1000
RSN: processing PMKSA candidate list
RSN: not in suitable state for new pre-authentication
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:13:46:3f:93:06 into blacklist
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 519 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 1
0: 00:13:46:3f:93:06 ssid='laundry' wpa_ie_len=28 rsn_ie_len=26 caps=0x11
   selected based on RSN IE
Trying to associate with 00:13:46:3f:93:06 (SSID='laundry' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 01 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: added PMKSA cache candidate 00:13:46:3f:93:06 prio 1000
RSN: processing PMKSA candidate list
RSN: not in suitable state for new pre-authentication
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:13:46:3f:93:06 blacklist count incremented to 2
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     6c 61 75 6e 64 72 79                              laundry
Scan timeout - try to get results
Received 294 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 1
0: 00:13:46:3f:93:06 ssid='laundry' wpa_ie_len=28 rsn_ie_len=26 caps=0x11
   skip - blacklisted
No APs found - clear blacklist and try again
Removed BSSID 00:13:46:3f:93:06 from blacklist (clear)
Selecting BSS from priority group 1
0: 00:13:46:3f:93:06 ssid='laundry' wpa_ie_len=28 rsn_ie_len=26 caps=0x11
   selected based on RSN IE
Trying to associate with 00:13:46:3f:93:06 (SSID='laundry' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 01 00
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: added PMKSA cache candidate 00:13:46:3f:93:06 prio 1000
RSN: processing PMKSA candidate list
RSN: not in suitable state for new pre-authentication
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Failed to disable WPA in the driver.
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6