[root@talk2 ~]# cat /var/log/dmesg Linux version 2.6.18-53.1.4.el5.centos.plus (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Dec 7 07:04:56 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f61a0 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Using x86 segment limits to approximate NX protection On node 0 totalpages: 524016 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294640 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP (v002 Nvidia ) @ 0x000f7e20 ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fef30c0 ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fefa580 ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x7fefa7c0 ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fefa840 ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fefa6c0 ACPI: SSDT (v001 NVIDIA Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x7fefa8c0 ACPI: SSDT (v001 NVIDIA CpuPm 0x00003000 INTL 0x20040311) @ 0x7fefad50 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) Detected 2133.505 MHz processor. Built 1 zonelists. Total pages: 524016 Kernel command line: ro root=/dev/VolGroup00/LogVol00 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0743000 soft=c0723000 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070564k/2096064k available (2081k kernel code, 24268k reserved, 868k data, 220k init, 1178560k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfefff000 (virtual 0xf8800000), IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 4269.76 BogoMIPS (lpj=2134883) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0744000 soft=c0724000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4266.95 BogoMIPS (lpj=2133477) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b Total of 2 processors activated (8536.72 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes migration_cost=59 checking if image is initramfs... it is Freeing initrd memory: 2983k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Firmware left 0000:03:07.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:0f.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: ioport range 0x1000-0x107f could not be reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f4000000-fbffffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: a000-afff MEM window: fdd00000-fdffffff PREFETCH window: 80000000-800fffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:17.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:18.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:00:17.0 to 64 PCI: Setting latency timer of device 0000:00:18.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1197469336.116:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key BF480B47C3099A4A - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie03] PCI: Setting latency timer of device 0000:00:13.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:13.0:pcie00] Allocate Port Service[0000:00:13.0:pcie03] PCI: Setting latency timer of device 0000:00:17.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:17.0:pcie00] Allocate Port Service[0000:00:17.0:pcie03] PCI: Setting latency timer of device 0000:00:18.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:18.0:pcie00] Allocate Port Service[0000:00:18.0:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [NVIDIA] OemTableId [ Cpu1Ist] [20060707] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Thermal Zone [THRM] (40 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfefff000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP55: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: 0000:00:0d.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. Failed to disable AUX port, but continuing anyway... Is this a SiS? If AUX port is really absent please use the 'i8042.noaux' option. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 220k freed Write protecting the kernel read-only data: 389k Time: tsc clocksource has been installed. USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:0e.0: version 3.4 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:0e.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 217 ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 217 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD1500ADFD-00NLR4, 21.07QR4, max UDMA/133 ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: WDC WD1500ADFD-00NLR4, 21.07QR4, max UDMA/133 ata2.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 Vendor: ATA Model: WDC WD1500ADFD-0 Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 293046768 512-byte hdwr sectors (150040 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD1500ADFD-0 Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 293046768 512-byte hdwr sectors (150040 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:0e.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001c800 irq 225 ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001c808 irq 225 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0e.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:0e.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b400 irq 233 ata6: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b802 bmdma 0x0001b408 irq 233 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1197469343.853:2): selinux=0 auid=4294967295 input: PC Speaker as /class/input/input0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:03:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 e100: eth0: e100_probe: addr 0xfdfff000, irq 50, MAC addr 00:02:A5:40:17:56 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others lp: driver loaded but no devices found Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.7 Zaptel Echo Canceller: MG2 ztdummy: RTC rate is 1024 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k