*** LSPCI **** 00:00.0 Host bridge: Intel Corporation DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation PCI Express Root Port (rev 02) 00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02) 00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0423 (rev a1) ** DMESG *** Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) BIOS-e820: 000000003fe90000 - 000000003fee3000 (ACPI NVS) BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f3ee0 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 261776) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 261776 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 261776 On node 0 totalpages: 261776 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 253 pages used for memmap HighMem zone: 32147 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.5 present. Using APIC driver default ACPI: RSDP 000F9780, 0024 (r2 DELL ) ACPI: XSDT 3FEE3080, 005C (r1 DELL FX09 42302E31 AWRD 0) ACPI: FACP 3FEE7200, 00F4 (r3 DELL FX09 42302E31 AWRD 0) ACPI: DSDT 3FEE3200, 3FFC (r1 DELL AWRDACPI 1000 MSFT 3000000) ACPI: FACS 3FE90000, 0040 ACPI: HPET 3FEE73C0, 0038 (r1 DELL FX09 42302E31 AWRD 98) ACPI: MCFG 3FEE7400, 003C (r1 DELL FX09 42302E31 AWRD 0) ACPI: SLIC 3FEE7440, 0176 (r1 DELL FX09 42302E31 AWRD 0) ACPI: DMY2 3FEE75C0, 0080 (r1 DELL FX09 42302E31 AWRD 0) ACPI: APIC 3FEE7300, 0084 (r1 DELL FX09 42302E31 AWRD 0) ACPI: SSDT 3FEE7CA0, 0380 (r1 PmRef CpuPm 3000 INTL 20041203) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 259731 Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-8-Live-KDE-i686 rootfstype=iso9660 ro quiet liveimg rhgb BOOT_IMAGE=vmlinuz0 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a8000 soft=c0788000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2327.625 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1028368k/1047104k available (2183k kernel code, 18040k reserved, 1117k data, 280k init, 129600k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc073f000 - 0xc0785000 ( 280 kB) .data : 0xc0621f7d - 0xc0739544 (1117 kB) .text : 0xc0400000 - 0xc0621f7d (2183 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 4657.63 BogoMIPS (lpj=2328817) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07a9000 soft=c0789000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4654.99 BogoMIPS (lpj=2327497) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3fd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b Total of 2 processors activated (9312.62 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes Booting paravirtualized kernel on bare hardware Time: 15:39:15 Date: 12/13/07 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xfb9e0, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:08: ioport range 0x400-0x4bf has been reserved pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0b: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:0b: iomem range 0x3ff00000-0x3fffffff has been reserved pnp: 00:0b: iomem range 0xfed00000-0xfed000ff could not be reserved pnp: 00:0b: iomem range 0x3fe90000-0x3fefffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: f8000000-fbffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 4531k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1197560355.572:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 230FF4508E76ABC1 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: SSDT 3FEE7680, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203) ACPI: SSDT 3FEE7B40, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203) ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: Thermal Zone [THRM] (40 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 3:736:689 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 849k SCSI subsystem initialized loop: module loaded USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected libata version 2.21 loaded. ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fd00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fb00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fa00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000f900 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdffe000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected hub 2-2:1.0: hub_port_status failed (err = -71) hub 2-2:1.0: hub_port_status failed (err = -71) hub 2-2:1.0: hub_port_status failed (err = -71) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f400 irq 18 ata2: SATA max UDMA/133 cmd 0x0001f600 ctl 0x0001f502 bmdma 0x0001f408 irq 18 usb 2-2: USB disconnect, address 2 ata1.00: ATA-7: WDC WD800JD-75MSA3, 10.01E04, max UDMA/133 ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 3 ports detected ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493B, D200, max UDMA/33 usb 2-2.2: new low speed USB device using uhci_hcd and address 4 ata2.00: configured for UDMA/33 ata2: EH pending after completion, repeating EH (cnt=4) scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75MS 10.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493B D200 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ed00 irq 18 ata4: SATA max UDMA/133 cmd 0x0001ef00 ctl 0x0001ee02 bmdma 0x0001ed08 irq 18 usb 2-2.2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-2.2 usb 2-2.3: new full speed USB device using uhci_hcd and address 5 sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk usb 2-2.3: configuration #1 chosen from 1 choice input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.1-2.3 input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.1-2.3 ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf8 Unable to load NLS charset utf8 ISO 9660 Extensions: RRIP_1991A squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. audit(1197560362.946:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats security: 67 classes, 207815 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr inode_doinit_with_dentry: no dentry for dev=dm-0 ino=218217 inode_doinit_with_dentry: no dentry for dev=dm-0 ino=214263 inode_doinit_with_dentry: no dentry for dev=dm-0 ino=214262 inode_doinit_with_dentry: no dentry for dev=dm-0 ino=219704 SELinux: initialized (dev loop2, type squashfs), not configured for labeling SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1197560365.135:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 FDC 0 is a post-1991 82077 input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] Intel(R) PRO/1000 Network Driver - 0.2.0 Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:19.0 to 64 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:77:cd:66 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 20 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k IA-32 Microcode Update Driver: v1.14a audit(1197578418.598:4): audit_pid=2078 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ADDRCONF(NETDEV_UP): eth0: link is not ready 0000:00:19.0: eth0: Link is Up 100 Mbps Half Duplex, Flow Control: None 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: no IPv6 routers present kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev sda1, type ext2), uses xattr