U-Boot 1.3.0-rc3.atmel.1 (Nov 16 2007 - 00:57:21)

U-Boot code: 00000000 -> 000103a0  data: 00016270 -> 0004c8a8
SDRAM: 32 MB at address 0x10000000
Testing SDRAM...OK
malloc: Using memory from 0x11f73000 to 0x11fb3000
DMA: Using memory from 0x11f6f000 to 0x11f73000
Flash:  8 MB at address 0x00000000
DRAM Configuration:
Bank #0: 10000000 32 MB
In:    serial
Out:   serial
Err:   serial
Net:   macb0, macb1
Press SPACE to abort autoboot in 5 seconds
Uboot> setenv ipaddr 192.168.1.1
Uboot> tftp 0x90000000 u-boot_ngw_1.3.1_normal.bin
macb0: link up, 100Mbps full-duplex (lpa: 0x45e1)
Using macb0 device
TFTP from server 192.168.1.50; our IP address is 192.168.1.1
Filename 'u-boot_ngw_1.3.1_normal.bin'.
Load address: 0x90000000
Loading: #######
done
Bytes transferred = 97656 (17d78 hex)
Uboot> protect off 0 0x1ffff
Un-Protected 9 sectors
Uboot> erase 0 0x1ffff
Erasing sector   0...Erasing sector   1...Erasing sector   2...Erasing sector   3...Erasing sector   4...Erasing secto
r   5...Erasing sector   6...Erasing sector   7...Erasing sector   8...Erased 9 sectors
Uboot> cp.b 0x90000000 0 0x17d78
Copy to Flash... done
Uboot> cmp.b 0 0x90000000 0x17d78
Total of 97656 bytes were the same
Uboot> protect on 0 0x1ffff
Protected 9 sectors
Uboot> reset

U-Boot 1.3.1.atmel.2 (Dec 15 2007 - 19:50:17)

U-Boot code: 00000000 -> 000103a0  data: 00016268 -> 0004c8a8
SDRAM: 32 MB at address 0x10000000
Testing SDRAM...OK
malloc: Using memory from 0x11f73000 to 0x11fb3000
DMA: Using memory from 0x11f6f000 to 0x11f73000
Flash:  8 MB at address 0x00000000
DRAM Configuration:
Bank #0: 10000000 32 MB
In:    serial
Out:   serial
Err:   serial
Net:   macb0, macb1
Press SPACE to abort autoboot in 5 seconds
## Booting image at 00020000 ...
   Image Name:   Linux-2.6.23.1
   Image Type:   AVR32 Linux Kernel Image (gzip compressed)
   Data Size:    776322 Bytes = 758.1 kB
   Load Address: 10000000
   Entry Point:  90000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel at 90000000 (params at 11f73008)...