[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable) [ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1143MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5290 [ 0.000000] Entering add_active_range(0, 0, 522224) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 522224 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 522224 [ 0.000000] On node 0 totalpages: 522224 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2287 pages used for memmap [ 0.000000] HighMem zone: 290561 pages, LIFO batch:31 [ 0.000000] DMI 2.2 present. [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 [ 0.000000] Processor #0 15:4 APIC version 17 [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f400000) [ 0.000000] Built 1 zonelists. Total pages: 518145 [ 0.000000] Kernel command line: root=UUID=d8b3a7f6-0370-427a-a2b2-e955b1a25ef0 ro quiet splash acpi=off [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3058.384 MHz processor. [ 42.701686] Console: colour VGA+ 80x25 [ 42.702152] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 42.702575] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 42.796192] Memory: 2059272k/2088896k available (2015k kernel code, 28348k reserved, 916k data, 364k init, 1171392k highmem) [ 42.796202] virtual kernel memory layout: [ 42.796203] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 42.796205] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 42.796206] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 42.796207] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 42.796208] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 42.796209] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 42.796210] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 42.796213] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 42.796259] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 42.876082] Calibrating delay using timer specific routine.. 6120.78 BogoMIPS (lpj=12241575) [ 42.876112] Security Framework v1.0.0 initialized [ 42.876119] SELinux: Disabled at boot. [ 42.876131] Mount-cache hash table entries: 512 [ 42.876273] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001 [ 42.876281] monitor/mwait feature present. [ 42.876283] using mwait in idle threads. [ 42.876290] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 42.876293] CPU: L2 cache: 1024K [ 42.876296] CPU: Physical Processor ID: 0 [ 42.876298] CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000651d 00000000 00000001 [ 42.876309] Compat vDSO mapped to ffffe000. [ 42.876326] Checking 'hlt' instruction... OK. [ 42.892162] SMP alternatives: switching to UP code [ 42.892416] Freeing SMP alternatives: 11k freed [ 42.892684] Early unpacking initramfs... done [ 43.181292] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 [ 43.181332] Total of 1 processors activated (6120.78 BogoMIPS). [ 43.181388] ExtINT not setup in hardware but reported by MP table [ 43.181464] ENABLING IO-APIC IRQs [ 43.181648] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 43.434716] Brought up 1 CPUs [ 43.434829] Booting paravirtualized kernel on bare hardware [ 43.434896] Time: 23:58:47 Date: 11/16/107 [ 43.434920] NET: Registered protocol family 16 [ 43.435008] EISA bus registered [ 43.459448] PCI: PCI BIOS revision 2.10 entry at 0xfae90, last bus=1 [ 43.459450] PCI: Using configuration type 1 [ 43.459452] Setting up standard PCI resources [ 43.466287] ACPI: Interpreter disabled. [ 43.466291] Linux Plug and Play Support v0.97 (c) Adam Belay [ 43.466299] pnp: PnP ACPI: disabled [ 43.466303] PnPBIOS: Scanning system for PnP BIOS support... [ 43.466312] PnPBIOS: Found PnP BIOS installation structure at 0xc00fb8b0 [ 43.466315] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb8e0, dseg 0xf0000 [ 43.466982] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver [ 43.467028] PCI: Probing PCI hardware [ 43.467034] PCI: Probing PCI hardware (bus 00) [ 43.467527] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 43.467531] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 43.467801] PCI: Transparent bridge - 0000:00:1e.0 [ 43.468338] PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0 [ 43.468346] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16 [ 43.468350] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16 [ 43.468353] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 [ 43.468356] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18 [ 43.468359] PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 16 [ 43.468363] PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23 [ 43.468369] PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 16 [ 43.468372] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 [ 43.468375] PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17 [ 43.468378] PCI->APIC IRQ transform: 0000:01:09.0[A] -> IRQ 21 [ 43.478390] NET: Registered protocol family 8 [ 43.478392] NET: Registered protocol family 20 [ 43.478452] pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved [ 43.478456] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not be reserved [ 43.478459] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 43.478462] pnp: 00:08: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 43.478467] pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 43.478470] pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 43.478472] pnp: 00:09: iomem range 0xf8000-0xfffff could not be reserved [ 43.478475] pnp: 00:09: iomem range 0xcc000-0xcffff has been reserved [ 43.478572] Time: tsc clocksource has been installed. [ 43.478799] PCI: Bridge: 0000:00:1e.0 [ 43.478803] IO window: 9000-9fff [ 43.478808] MEM window: f8000000-f80fffff [ 43.478812] PREFETCH window: disabled. [ 43.478826] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 43.478836] NET: Registered protocol family 2 [ 43.506539] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 43.506633] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 43.507701] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 43.508186] TCP: Hash tables configured (established 131072 bind 65536) [ 43.508189] TCP reno registered [ 43.518641] checking if image is initramfs... it is [ 44.081174] Freeing initrd memory: 7331k freed [ 44.081622] audit: initializing netlink socket (disabled) [ 44.081637] audit(1197849528.080:1): initialized [ 44.081713] highmem bounce pool size: 64 pages [ 44.083653] VFS: Disk quotas dquot_6.5.1 [ 44.083707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 44.083843] io scheduler noop registered [ 44.083846] io scheduler anticipatory registered [ 44.083847] io scheduler deadline registered [ 44.083863] io scheduler cfq registered (default) [ 44.083877] Boot video device is 0000:00:02.0 [ 44.084061] isapnp: Scanning for PnP cards... [ 44.435086] isapnp: No Plug & Play device found [ 44.459700] Real Time Clock Driver v1.12ac [ 44.459774] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 44.459860] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.460630] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 44.461356] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 44.461570] input: Macintosh mouse button emulation as /class/input/input0 [ 44.461660] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 44.464533] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 44.464541] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 44.464734] mice: PS/2 mouse device common for all mice [ 44.464846] EISA: Probing bus 0 at eisa.0 [ 44.464884] EISA: Detected 0 cards. [ 44.464968] TCP cubic registered [ 44.464979] NET: Registered protocol family 1 [ 44.465002] Using IPI No-Shortcut mode [ 44.465078] Magic number: 3:124:1010 [ 44.465515] Freeing unused kernel memory: 364k freed [ 44.541324] input: AT Translated Set 2 keyboard as /class/input/input1 [ 45.660664] AppArmor: AppArmor initialized<5>audit(1197849529.580:2): type=1505 info="AppArmor initialized" pid=1127 [ 45.666930] fuse init (API version 7.8) [ 45.672418] Failure registering capabilities with primary security module. [ 45.705437] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 46.161529] usbcore: registered new interface driver usbfs [ 46.161556] usbcore: registered new interface driver hub [ 46.161583] usbcore: registered new device driver usb [ 46.162352] USB Universal Host Controller Interface driver v3.0 [ 46.162419] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 46.162424] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 46.162573] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 46.162599] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a000 [ 46.162716] usb usb1: configuration #1 chosen from 1 choice [ 46.162744] hub 1-0:1.0: USB hub found [ 46.162751] hub 1-0:1.0: 2 ports detected [ 46.263659] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 46.263664] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 46.263694] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 46.263722] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 46.263816] usb usb2: configuration #1 chosen from 1 choice [ 46.263845] hub 2-0:1.0: USB hub found [ 46.263853] hub 2-0:1.0: 2 ports detected [ 46.270472] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 46.304115] SCSI subsystem initialized [ 46.309403] libata version 2.21 loaded. [ 46.367431] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 46.367437] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 46.367466] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 46.367493] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a800 [ 46.367590] usb usb3: configuration #1 chosen from 1 choice [ 46.367618] hub 3-0:1.0: USB hub found [ 46.367626] hub 3-0:1.0: 2 ports detected [ 46.397633] FDC 0 is a post-1991 82077 [ 46.471084] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 46.471090] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 46.471119] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 46.471143] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ac00 [ 46.471241] usb usb4: configuration #1 chosen from 1 choice [ 46.471268] hub 4-0:1.0: USB hub found [ 46.471276] hub 4-0:1.0: 2 ports detected [ 46.576237] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 46.576243] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 46.576280] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 46.576317] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 46.576329] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8180000 [ 46.606634] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 46.606652] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 46.606780] usb usb5: configuration #1 chosen from 1 choice [ 46.606810] hub 5-0:1.0: USB hub found [ 46.606820] hub 5-0:1.0: 8 ports detected [ 46.710693] 8139cp 0000:01:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 46.710698] 8139cp 0000:01:09.0: Try the "8139too" driver instead. [ 46.712605] 8139too Fast Ethernet driver 0.9.28 [ 46.712948] eth0: RealTek RTL8139 at 0xf8834000, 00:19:21:3f:de:c3, IRQ 21 [ 46.712950] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 46.715862] ata_piix 0000:00:1f.1: version 2.11 [ 46.715910] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 46.715987] scsi0 : ata_piix [ 46.716033] scsi1 : ata_piix [ 46.716060] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 46.716064] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 46.887421] ata1.00: ATA-6: WDC WD2500BB-55GUA0, 08.02D08, max UDMA/100 [ 46.887426] ata1.00: 488397168 sectors, multi 16: LBA48 [ 46.903010] ata1.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100 [ 46.903014] ata1.01: 488397168 sectors, multi 16: LBA48 [ 46.919325] ata1.00: configured for UDMA/100 [ 46.934122] ata1.01: configured for UDMA/100 [ 47.253164] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33 [ 47.360690] usb 2-1: new full speed USB device using uhci_hcd and address 3 [ 47.424738] ata2.00: configured for UDMA/33 [ 47.424856] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BB-55G 08.0 PQ: 0 ANSI: 5 [ 47.425225] scsi 0:0:1:0: Direct-Access ATA WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5 [ 47.429604] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5 [ 47.445984] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 47.446003] sd 0:0:0:0: [sda] Write Protect is off [ 47.446006] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.446025] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.446085] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 47.446096] sd 0:0:0:0: [sda] Write Protect is off [ 47.446099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 47.446115] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.446120] sda: sda1 sda2 [ 47.511732] sd 0:0:0:0: [sda] Attached SCSI disk [ 47.511898] sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 47.511912] sd 0:0:1:0: [sdb] Write Protect is off [ 47.511915] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 47.511933] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.511978] sd 0:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) [ 47.511989] sd 0:0:1:0: [sdb] Write Protect is off [ 47.511991] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 47.512008] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 47.512011] sdb: sdb1 sdb2 [ 47.540554] sd 0:0:1:0: [sdb] Attached SCSI disk [ 47.541323] usb 2-1: configuration #1 chosen from 1 choice [ 47.544729] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 47.544750] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 47.544770] scsi 1:0:0:0: Attached scsi generic sg2 type 5 [ 47.585181] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 47.585186] Uniform CD-ROM driver Revision: 3.20 [ 47.585404] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 47.950948] Attempting manual resume [ 47.950953] swsusp: Resume From Partition 8:2 [ 47.950955] PM: Checking swsusp image. [ 47.951126] PM: Resume from disk failed. [ 48.010036] kjournald starting. Commit interval 5 seconds [ 48.010046] EXT3-fs: mounted filesystem with ordered data mode. [ 55.459809] Linux agpgart interface v0.102 (c) Dave Jones [ 55.461637] agpgart: Detected an Intel 865 Chipset. [ 55.461993] agpgart: Detected 8060K stolen memory. [ 55.476194] agpgart: AGP aperture is 128M @ 0xf0000000 [ 55.864693] iTCO_vendor_support: vendor-support=0 [ 55.871868] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 55.871940] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 55.871981] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 55.894572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 55.896289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 55.939153] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 55.939170] usbcore: registered new interface driver usblp [ 55.939173] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 56.077844] input: PC Speaker as /class/input/input2 [ 56.087735] intel_rng: FWH not detected [ 56.369924] logips2pp: Detected unknown logitech mouse model 14 [ 56.470479] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 56.792668] intel8x0_measure_ac97_clock: measured 54738 usecs [ 56.792671] intel8x0: clocking to 48000 [ 56.835470] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3 [ 56.838499] parport_pc 00:0f: reported by Plug and Play BIOS [ 56.838594] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 57.651470] lp0: using parport0 (interrupt-driven). [ 57.704713] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 57.929798] usb 2-1: USB disconnect, address 3 [ 57.929924] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed [ 57.994668] EXT3 FS on sda1, internal journal [ 59.544047] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 59.544090] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 59.544204] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 59.544258] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 60.707928] eth0: link up, 10Mbps, half-duplex, lpa 0x0000 [ 62.837171] [drm] Initialized drm 1.1.0 20060810 [ 62.850818] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 63.447218] ppdev: user-space parallel port driver [ 63.899900] audit(1197849547.888:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4383 profile="/usr/sbin/cupsd" [ 66.087765] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 68.668609] NET: Registered protocol family 10 [ 68.668773] lo: Disabled Privacy Extensions [ 71.331651] usb 2-1: new full speed USB device using uhci_hcd and address 4 [ 71.513194] usb 2-1: configuration #1 chosen from 1 choice [ 71.523149] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 73.503947] Bluetooth: Core ver 2.11 [ 73.504073] NET: Registered protocol family 31 [ 73.504077] Bluetooth: HCI device and connection manager initialized [ 73.504080] Bluetooth: HCI socket layer initialized [ 73.627895] Bluetooth: L2CAP ver 2.8 [ 73.627900] Bluetooth: L2CAP socket layer initialized [ 73.841028] Bluetooth: RFCOMM socket layer initialized [ 73.841132] Bluetooth: RFCOMM TTY layer initialized [ 73.841135] Bluetooth: RFCOMM ver 1.8 [ 75.901090] PPP generic driver version 2.4.2 [ 76.340593] NET: Registered protocol family 17 [ 76.670385] device eth0 entered promiscuous mode [ 76.670396] audit(1197849560.889:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 [ 79.295356] eth0: no IPv6 routers present [ 79.440980] PPP BSD Compression module registered [ 79.488935] PPP Deflate Compression module registered [ 130.823971] uhci_hcd 0000:00:1d.2: host controller process error, something bad happened! [ 130.823979] uhci_hcd 0000:00:1d.2: host controller halted, very bad! [ 130.823997] uhci_hcd 0000:00:1d.2: HC died; cleaning up [ 164.650228] ppdev0: registered pardevice [ 164.697870] ppdev0: unregistered pardevice [ 164.780085] audit(1197849649.400:5): type=1503 operation="sysctl" requested_mask="r" denied_mask="r" name="/proc/sys/dev/parport/parport0/autoprobe" pid=5358 profile="/usr/sbin/cupsd" [ 164.843986] audit(1197849649.400:6): type=1503 operation="sysctl" requested_mask="r" denied_mask="r" name="/proc/sys/dev/parport/parport0/autoprobe" pid=5359 profile="/usr/sbin/cupsd" [ 166.054145] ppdev0: registered pardevice [ 166.102302] ppdev0: unregistered pardevice [ 283.148966] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71 [ 475.239787] uhci_hcd 0000:00:1d.1: host controller process error, something bad happened! [ 475.239796] uhci_hcd 0000:00:1d.1: host controller halted, very bad! [ 475.239812] uhci_hcd 0000:00:1d.1: HC died; cleaning up [ 475.239822] usb 2-1: USB disconnect, address 4 [ 475.246882] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: error -108 reading printer status [ 475.248292] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: removed