tsuruki luke-jr # cat /proc/sys/dev/cdrom/info CD-ROM information, Id: cdrom.c 3.20 2003/12/17 drive name: hdd hdc drive speed: 63 40 drive # of slots: 1 1 Can close tray: 1 1 Can open tray: 1 1 Can lock tray: 1 1 Can change speed: 1 1 Can select disk: 0 0 Can read multisession: 1 1 Can read MCN: 1 1 Reports media changed: 1 1 Can play audio: 1 1 Can write CD-R: 1 1 Can write CD-RW: 1 1 Can read DVD: 1 1 Can write DVD-R: 1 1 Can write DVD-RAM: 0 0 Can read MRW: 1 1 Can write MRW: 1 1 Can write RAM: 1 1 tsuruki luke-jr # cat /etc/fstab # /etc/fstab: static file system information. # # noatime turns off atimes for increased performance (atimes normally aren't # needed; notail increases performance of ReiserFS (at the expense of storage # efficiency). It's safe to drop the noatime options if you want and to # switch between notail / tail freely. # # The root filesystem should have a pass number of either 0 or 1. # All other filesystems should have a pass number of 0 or greater than 1. # # See the manpage fstab(5) for more information. # # # NOTE: The next line is critical for boot! proc /proc proc defaults 0 0 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. /dev/sda1 /boot ext2 noauto,noatime 1 1 /dev/sda3 / ext3 noatime,acl,user_xattr 0 0 #tmpfs /tmp tmpfs defaults 0 0 /dev/hda3 /mnt/old ext3 noatime,acl,user_xattr 0 0 /dev/sda2 swap swap sw,pri=10 0 0 /dev/hda2 swap swap sw,pri=10 0 0 /dev/hdc /mnt/dvd0 iso9660,udf ro,user,noauto 0 0 /dev/hdd /mnt/dvd1 iso9660,udf ro,user,noauto 0 0 /dev/fd0 /mnt/fd0 auto noauto 0 0 # NOTE: The next line is critical for boot! proc /proc proc defaults 0 0 # glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for # POSIX shared memory (shm_open, shm_unlink). # (tmpfs is a dynamically expandable/shrinkable ramdisk, and will # use almost no memory if not populated with files) shm /dev/shm tmpfs nodev,nosuid,noexec 0 0 tsuruki luke-jr # cdrdao scanbus Cdrdao version 1.2.2 - (C) Andreas Mueller SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' ATA:1,0,0 TOSHIBA , ODD-DVD SD-R5272, 1030 ATA:1,1,0 TOSHIBA , ODD-DVD SD-R5272, 1030