linuxbox:/local/devel/linuxtogo/kernel # telnet 192.168.1.206
Trying 192.168.1.206...
Connected to 192.168.1.206.
Escape character is '^]'.



BusyBox v1.1.0 (2006.02.24-18:59+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ $ dmesg
rmal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Memory clock: 99.53MHz (*27)
[    0.000000] Run Mode clock: 398.13MHz (*4)
[    0.000000] Turbo Mode clock: 398.13MHz (*1.0, inactive)
[    0.000000] CKEN=0x10a71 CKEN11_USB=0xb
[    0.000000] CKEN=0x10a71
[    0.000000] CPU0: D VIVT undefined 5 cache
[    0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
[    0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 32512
[    0.000000] Kernel command line: root=/dev/ram0 console=tty0 mem=128M rootdelay=5 psplash=1
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.010000] Memory: 128MB = 128MB total
[    0.010000] Memory: 125952KB available (2992K code, 265K data, 684K init)
[    0.010000] Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
[    0.230000] Mount-cache hash table entries: 512
[    0.230000] CPU: Testing write buffer coherency: ok
[    0.230000] NET: Registered protocol family 16
[    0.270000] asic3: using irq 192-261 on irq 67
[    0.280000] Initializing blueangel tsc2200 ssp... done
[    0.280000] tsc2200_probe: SPI: cr0 0000138f cr1 60000010 sr: 0000f024 it: 00000000 to: 00000000 ps: 00000000
[    0.280000] tsc2200_adc_ssp: Probing
[    0.290000] tsc2200_adc_ssp: ok
[    0.330000] NET: Registered protocol family 23
[    0.330000] Bluetooth: Core ver 2.11
[    0.330000] NET: Registered protocol family 31
[    0.330000] Bluetooth: HCI device and connection manager initialized
[    0.330000] Bluetooth: HCI socket layer initialized
[    0.340000] Time: oscr0 clocksource has been installed.
[    0.340000] pxa2xx-udc-gpio: Generic driver for GPIO-controlled PXA2xx UDC
[    0.340000] NET: Registered protocol family 2
[    0.440000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.440000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.440000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.440000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.440000] TCP reno registered
[    0.720000] blueangel_lcd_init
[    0.720000] Blue Angel Board ID 0x5
[    0.720000] in blueangel_lcd_probe
[    0.730000] HTC Blueangel DS1WM driver
[    0.730000] blueangel_pcmcia_socket_init
[    0.730000] blueangel_pcmcia_configure_socket
[    0.730000] Reset:0 ,Vcc:0 ,Flags:0
[    0.990000] blueangel_pm_init
[    0.990000] retval=0
[    0.990000] blueangel_led_probe
[    0.990000] Registered led device: blueangel:wifi
[    0.990000] brightness=0 for the led=6
[    0.990000] Registered led device: blueangel:bt
[    0.990000] brightness=0 for the led=7
[    0.990000] input: blueangelkb as /class/input/input0
[    0.990000] Probing PXA Flash 1 at physical address 0x00000000 (32-bit bankwidth)
[    0.990000] mymtd=00000000
[    0.990000] gprs0 at MMIO 0x10800000 (irq = 132) is a DPRAM
[    0.990000] dpram hwident: 'HTC-DPRAM ASIC P/N:30H80037-00-L'
[    0.990000] PXA CPU frequency change support initialized
[    1.000000] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.000000] io scheduler noop registered
[    1.000000] io scheduler anticipatory registered (default)
[    1.000000] io scheduler deadline registered
[    1.010000] Corgi Backlight Driver Initialized.
[    1.010000] Found w3200 at 0x08000000.
[    1.050000] Console: switching to colour frame buffer device 60x53
[    1.060000] fb0: w100fb frame buffer device
[    1.150000] blueangel_pcmcia_configure_socket
[    1.150000] Reset:0 ,Vcc:50 ,Flags:0
[    1.200000] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
[    1.200000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
[    1.200000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
[    1.200000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART
[    1.200000] pxa2xx-ir-serial: Initialized
[    1.210000] RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
[    1.210000] pxa2xx_udc: version 30-June-2007
[    1.220000] DPM: pda_udc: Turning off port
[    1.220000] ether gadget: using random self ethernet address
[    1.220000] ether gadget: using random host ethernet address
[    1.220000] usb0: Ethernet Gadget, version: May Day 2005
[    1.220000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in-bulk
[    1.230000] usb0: MAC 5e:65:a2:c4:07:65
[    1.230000] usb0: HOST MAC ca:15:cc:ac:01:c2
[    1.240000] usb0: RNDIS ready
[    1.250000] DPM: pda_udc: Turning on port
[    1.250000] input: gpio-keys as /class/input/input1
[    1.250000] pxa_gpiodev_get_value(8)
[    1.270000] input: asic3-keys as /class/input/input2
[    1.280000] Registering tsc2200 buttons driver
[    1.290000] 9<6>input: tsc2200-keys as /class/input/input3
[    1.310000] input: ts-adc as /class/input/input4
[    1.320000] sa1100-rtc: dev (254:0)
[    1.320000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
[    1.330000] Driver for 1-wire Dallas network protocol.
[    1.340000] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    1.360000] blueangel_ds1wm: OWM_EN Low (active)
[    1.370000] pxa_gpiodev_get_value(8)
[    1.390000] 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
[    1.400000] blueangel_set_charge: enabled=1
[    1.420000] APM Battery Driver
[    1.430000] Bluetooth: HCI UART driver ver 2.2
[    1.430000] Bluetooth: HCI H4 protocol initialized
[    1.430000] pxa_gpiodev_get_value(8)
[    1.450000] Bluetooth: HCI BCSP protocol initialized
[    1.460000] Registered led device: blueangel:red
[    1.470000] Registered led device: blueangel:green
[    1.480000] Registered led device: blueangel:phonebuttons
[    1.490000] Registered led device: blueangel:vibra
[    1.490000] Registered led device: blueangel:kbdbacklight
[    1.500000] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
[    1.520000] ALSA device list:
[    1.530000]   No soundcards found.
[    1.530000] TCP cubic registered
[    1.540000] NET: Registered protocol family 1
[    1.550000] NET: Registered protocol family 17
[    1.560000] blueangel_pcmcia_configure_socket
[    1.560000] Reset:1 ,Vcc:50 ,Flags:240
[    1.570000] blueangel_pcmcia_configure_socket
[    1.580000] Reset:0 ,Vcc:50 ,Flags:200
[    1.580000] IrCOMM protocol (Dag Brattli)
[    1.630000] Bluetooth: L2CAP ver 2.8
[    1.630000] Bluetooth: L2CAP socket layer initialized
[    1.630000] pxa_gpiodev_get_value(8)
[    1.650000] Bluetooth: SCO (Voice Link) ver 0.5
[    1.650000] Bluetooth: SCO socket layer initialized
[    1.660000] Bluetooth: RFCOMM socket layer initialized
[    1.670000] Bluetooth: RFCOMM TTY layer initialized
[    1.670000] Bluetooth: RFCOMM ver 1.8
[    1.680000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
[    1.680000] Bluetooth: BNEP filters: protocol multicast
[    1.690000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.700000] pccard: PCMCIA card inserted into slot 0
[    1.710000] pcmcia: registering new device pcmcia0.0
[    1.720000] XScale DSP coprocessor detected.
[    1.730000] sa1100-rtc sa1100-rtc: setting the system clock to 1994-09-02 12:01:33 (778507293)
[    1.740000] Freeing init memory: 684K
[    1.940000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
[    1.960000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
/ $