Bootdata ok (command line is root=/dev/sda1 ro noapic ) Linux version 2.6.18-5-amd64 (Debian 2.6.18.dfsg.1-13) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu May 31 23:51:05 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) BIOS-e820: 000000003bf00000 - 000000003bf15000 (ACPI data) BIOS-e820: 000000003bf15000 - 000000003bf80000 (ACPI NVS) BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI present. ACPI: RSDP (v000 HP ) @ 0x00000000000f8930 ACPI: RSDT (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000) @ 0x000000003bf0c037 ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003bf14b58 ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003bf14bcc ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003bf14d90 ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x000000003bf14dcc ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003bf14e04 ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003bf14e62 ACPI: SLIC (v001 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001) @ 0x000000003bf14e8a ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x03000000) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000003bf00000 NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-000000003bf00000 On node 0 totalpages: 241162 DMA zone: 3054 pages, LIFO batch:0 DMA32 zone: 238108 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:8 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: Skipping IOAPIC probe due to 'noapic' option. ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: nVIDIA Product ID: C51-MCP51 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Setting APIC routing to physical flat Processors: 2 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 241162 Kernel command line: root=/dev/sda1 ro noapic Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer. time.c: Detected 1808.483 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... CPU 0: aperture @ fb80000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 957580k/982016k available (1927k kernel code, 24040k reserved, 868k data, 176k init) Calibrating delay using timer specific routine.. 3621.17 BogoMIPS (lpj=7242340) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0ca0) Using local APIC timer interrupts. result 12558914 Detected 12.558 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 spurious 8259A interrupt: IRQ7. Calibrating delay using timer specific routine.. 3624.16 BogoMIPS (lpj=7248320) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 513 cycles) Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=113 checking if image is initramfs... it is Freeing initrd memory: 5377k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 PCI: No mmconfig possible on device 0:18 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:05.0 PCI: Transparent bridge - 0000:00:10.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid SYN012A pnp: PnP ACPI: found 13 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz PCI-DMA: Disabling IOMMU. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:00' and the driver 'system' pnp: match found with the PnP device '00:01' and the driver 'system' pnp: match found with the PnP device '00:03' and the driver 'system' pnp: match found with the PnP device '00:04' and the driver 'system' pnp: 00:04: ioport range 0x1000-0x107f could not be reserved pnp: 00:04: ioport range 0x1080-0x10ff has been reserved pnp: 00:04: ioport range 0x1400-0x147f has been reserved pnp: 00:04: ioport range 0x1480-0x14ff could not be reserved pnp: 00:04: ioport range 0x1800-0x187f has been reserved pnp: 00:04: ioport range 0x1880-0x18ff has been reserved pnp: 00:04: ioport range 0x2000-0x203f has been reserved pnp: match found with the PnP device '00:05' and the driver 'system' PCI: Bridge: 0000:00:02.0 IO window: 4000-4fff MEM window: b4000000-b7ffffff PREFETCH window: d0000000-d01fffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: b8000000-bbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:10.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1198546884.876:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie03] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pnp: the driver 'serial' has been registered RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0c' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 176k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Thermal Zone [THRM] (37 C) ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7 PCI: setting IRQ 7 as level-triggered ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:0b.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0b.1 ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 NFORCE-MCP51: chipset revision 241 NFORCE-MCP51: not 100% native mode: will probe irqs later NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... SCSI subsystem initialized libata version 2.00 loaded. hda: TSSTcorpCD/DVDW TS-L632M, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:14.0 to 64 forcedeth: using HIGHDMA eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0 sata_nv 0000:00:0e.0: version 2.0 PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 5 ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 5 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8, max UDMA/100, 234441648 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x30BF Vendor: ATA Model: SAMSUNG HM121HI Rev: LZ10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi disk sda Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:10.1 to 64 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 ts: Compaq touchscreen protocol output Adding 522072k swap on /dev/sda5. Priority:-1 extents:1 across:522072k EXT3 FS on sda1, internal journal loop: loaded (max 8 devices) ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'TKIP' ieee80211_crypt: registered algorithm 'CCMP' Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper (link_pe_images:576): fixing KI_USER_SHARED_DATA address in the driver ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 10 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:03:00.0 to 64 ndiswrapper: using IRQ 10 wlan0: ethernet device 00:1a:73:d0:d2:fb using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK usbcore: registered new driver ndiswrapper ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation IA-32 Microcode Update Driver: v1.14a device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [ACAD] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:05.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready IPv6 over IPv4 tunneling driver ADDRCONF(NETDEV_UP): wlan0: link is not ready irq 7: nobody cared (try booting with the "irqpoll" option) Call Trace: [] __report_bad_irq+0x30/0x7d [] note_interrupt+0x1ed/0x22e [] __do_IRQ+0xc7/0x105 [] do_IRQ+0x65/0x73 [] default_idle+0x0/0x50 [] ret_from_intr+0x0/0xa [] default_idle+0x29/0x50 [] cpu_idle+0x95/0xb8 [] start_kernel+0x216/0x21b [] _sinittext+0x288/0x28c handlers: [] (usb_hcd_irq+0x0/0x55) Disabling IRQ #7 npviewer.bin[12478]: segfault at 0000000061707372 rip 00000000f7b72e1b rsp 00000000f5b59d90 error 4 npviewer.bin[12534]: segfault at 0000000000000001 rip 00000000f7af4690 rsp 00000000ffab0bb0 error 4 npviewer.bin[12556]: segfault at 0000000000000001 rip 00000000f7af4690 rsp 00000000f5b45b80 error 4 eth0: link down. eth0: link up. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready npviewer.bin[2814]: segfault at 0000000068706c61 rip 00000000f7ad5b47 rsp 00000000f5b45d88 error 4 npviewer.bin[2825]: segfault at 0000000000000001 rip 00000000f7b42a27 rsp 00000000ffae4b44 error 4 ADDRCONF(NETDEV_UP): wlan0: link is not ready npviewer.bin[3154]: segfault at 0000000000000034 rip 00000000f7acab47 rsp 00000000f5b3ad88 error 4 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse.c: issuing reconnect request Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input3