/* * Device Tree Source for IOMEGA StorCenter * * Copyright 2007 Oyvind Repvik, Jon Loeliger * * Based on the Kurobox DTS by G. Liakhovetski * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. * * build using: * dtc -f -b 0 -I dts -O dtb -o storcenter.dtb storcenter.dts */ / { model = "StorCenter"; compatible = "storcenter"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,603e { /* Really 8241 */ device_type = "cpu"; reg = <0>; /* XXX correct? */ clock-frequency = ; /* Hz */ timebase-frequency = ; /* Hz */ bus-frequency = <0>; /* Following required by dtc but not used */ i-cache-line-size = <0>; d-cache-line-size = <0>; i-cache-size = <4000>; d-cache-size = <4000>; }; }; memory { device_type = "memory"; reg = <00000000 04000000>; /* 64MB @ 0x0 */ }; flash@ff800000 { device_type = "rom"; compatible = "direct-mapped"; probe-type = "CFI"; reg = ; bank-width = <1>; /* XXX add protium partitions*/ partitions = < 00000000 0000E000 0000E000 00002000 00010000 00040000 00050000 00200000 00250000 004B0000 00700000 00020000 00720000 00010000 00730000 00010000 00740000 000B0000 >; /* XXX fix names */ partition-names = "uboot2env", "dtb", "uboot2", "emkernel", "emfs", "uboot1", "empty", "uboot1-env", "SysConf"; }; soc10x { #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ reg = <80000000 00100000>; ranges = <80000000 80000000 70000000 /* pci mem space */ fdf00000 fdf00000 00100000 /* EUMB */ fe000000 fe000000 00c00000 /* pci i/o space */ fec00000 fec00000 00300000 /* pci cfg regs */ fef00000 fef00000 00100000>; /* pci iack */ i2c@3000 { #address-cells = <1>; #size-cells = <0>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 1000>; interrupts = <5 2>; interrupt-parent = <&mpic>; /* dfsrr; */ rtc@68 { compatible = "dallas,ds1337"; reg = <68>; }; }; serial@4500 { device_type = "serial"; compatible = "ns16550"; reg = <4500 8>; clock-frequency = ; /* Hz */ current-speed = ; interrupts = <9 2>; interrupt-parent = <&mpic>; }; serial@4600 { device_type = "serial"; compatible = "ns16550"; reg = <4600 8>; clock-frequency = ; /* Hz */ current-speed = ; interrupts = ; interrupt-parent = <&mpic>; }; mpic: pic@40000 { #interrupt-cells = <2>; #address-cells = <0>; device_type = "open-pic"; compatible = "chrp,open-pic"; interrupt-controller; reg = <40000 40000>; built-in; }; pci@fe800000 { #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; device_type = "pci"; compatible = "mpc10x-pci"; reg = ; /* pci_space pci_addr cpu_addr pci_next cpu_next size */ /* pci_space>>24==1 : PCI IO space pci_space>>24==2 : PCI MEM space */ ranges = <01000000 0 0 fe000000 0 00c00000 02000000 0 80000000 80000000 0 70000000>; bus-range = <0 ff>; clock-frequency = ; /* Hz */ interrupt-parent = <&mpic>; interrupt-map-mask = ; interrupt-map = < /* XXX need ide */ /* XXX need usb ohci */ /* XXX need usb ohci */ /* XXX need usb ehci */ /* from iomega8241.c (arch=ppc): static char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D { { 1, 1, 0, 0 }, { 2, 3, 4, 1 }, { 0, 0, 4, 4 }, { 3, 3, 4, 4 }, { 3, 3, 4, 4 }, }; const long min_idsel = 13, max_idsel = 17, irqs_per_slot = 4; */ >; }; }; chosen { linux,stdout-path = "/soc10x/serial@4500"; bootargs = "console=ttyS0,115200 netconsole=@172.20.50.77/eth0,@172.20.50.1/00:A0:D1:28:CE:7E ip=172.20.50.77:172.20.50.1:172.20.50.1:255.255.255.0:storcent:eth0:dhcp"; }; };