Linux version 2.6.22.13-0.3-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/11/19 15:02:58 UTC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffe000 (usable) BIOS-e820: 000000003fffe000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 262142) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262142 early_node_map[1] active PFN ranges 0: 0 -> 262142 On node 0 totalpages: 262142 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32511 pages, LIFO batch:7 DMI 2.2 present. Using APIC driver default ACPI: RSDP 000FDEE0, 0014 (r0 DELL ) ACPI: RSDT 000FDEF4, 002C (r1 DELL WS 410 2 ASL 61) ACPI: FACP 000FDF20, 0074 (r1 DELL WS 410 2 ASL 61) ACPI: DSDT FFFF5000, 166F (r1 DELL dt_ex 1000 MSFT 100000B) ACPI: FACS 3FFFE000, 0040 ACPI: APIC 000FDF94, 0066 (r1 DELL WS 410 2 ASL 61) ACPI: DMI BIOS year==0, assuming ACPI-capable machine ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:7 APIC version 17 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:7 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x4]) ACPI: NMI not connected to LINT 1! ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists. Total pages: 260095 Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST380021A_3HV1Q7X3-part2 vga=0x317 resume=/dev/sda1 splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 497.445 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1031100k/1048568k available (1825k kernel code, 16836k reserved, 765k data, 228k init, 131064k highmem) virtual kernel memory layout: fixmap : 0xffdf4000 - 0xfffff000 (2092 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc038e000 - 0xc03c7000 ( 228 kB) .data : 0xc02c844b - 0xc0387964 ( 765 kB) .text : 0xc0100000 - 0xc02c844b (1825 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 995.96 BogoMIPS (lpj=1991924) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 4403k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 171 Objects with 22 Devices 66 Methods 5 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful CPU0: Intel Pentium III (Katmai) stepping 03 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 994.96 BogoMIPS (lpj=1989924) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (1990.92 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=3009 Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfcf1e, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................ Initialized 3/5 Regions 0/0 Fields 5/5 Buffers 8/11 Packages (180 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 26 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region 0800-083f claimed by PIIX4 ACPI PCI quirk: region 0850-085f claimed by PIIX4 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved pnp: 00:00: iomem range 0x1000000-0x3fffffff could not be reserved pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:0c: ioport range 0x800-0x85f could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fc000000-fdffffff PREFETCH window: f4000000-f7ffffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1198950783.684:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Boot video device is 0000:01:00.0 vesafb: framebuffer at 0xf6000000, mapped to 0xf8880000, using 6144k, total 16320k vesafb: mode is 1024x768x16, linelength=2048, pages=8 vesafb: protected mode interface info at c000:03b8 vesafb: pmi: set display start = c00c03f1, set palette = c00c0467 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 78436 bytes bootsplash: ...found (1024x768, 28133 bytes, v3). Console: switching to colour frame buffer device 124x44 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: Card 'CS4236B' isapnp: 1 Plug & Play card detected total Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 NET: Registered protocol family 1 Using IPI No-Shortcut mode Freeing unused kernel memory: 228k freed SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 16 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 16, io base 0x0000ece0 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected libata version 3.00 loaded. ata_piix 0000:00:07.1: version 2.11 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 ata1.00: ATA-5: ST380021A, 3.75, max UDMA/100 ata1.00: 156301488 sectors, multi 8: LBA usb 1-2: new low speed USB device using uhci_hcd and address 2 ata1.00: configured for UDMA/33 usb 1-2: new device found, idVendor=046d, idProduct=c504 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: USB Receiver usb 1-2: Manufacturer: Logitech usb 1-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:07.2-2 ata2.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.29, max UDMA/66 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA ST380021A 3.75 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.29 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pnp: Device 01:01.01 activated. gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x3a0, speed 718kHz Linux agpgart interface v0.102 (c) Dave Jones sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 16 3c59x: Donald Becker and others. 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at f9020000. agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf0000000 parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:05 failed with error -16 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device piix4_smbus 0000:00:07.3: Host SMBus controller not enabled! pnp: Device 01:01.00 activated. pnp: Device 01:01.00 disabled. cs4232-pnpbios: probe of 01:01.00 failed with error -2 Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1198950796.184:2): type=1505 info="AppArmor initialized" pid=1848 IA-32 Microcode Update Driver: v1.14a powernow: This module only works with AMD K7 CPUs eth0: setting full-duplex. NET: Registered protocol family 17 mtrr: no more MTRRs available audit(1198950811.773:3): audit_pid=2934 old=0 by auid=4294967295 ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team BIOS EDD facility v0.16 2004-Jun-25, 1 devices found bootsplash: status on console 0 changed to on