sed kernel memory: 224k freed [4294668.769000] vga16fb: initializing [4294668.769000] vga16fb: mapped to 0xc00a0000 [4294668.880000] Console: switching to colour frame buffer device 80x30 [4294668.880000] fb0: VGA16 VGA frame buffer device [4294670.002000] Capability LSM initialized [4294670.013000] NET: Registered protocol family 1 [4294670.028000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294670.028000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294670.028000] ACPI: bus type ide registered [4294670.039000] SCSI subsystem initialized [4294670.040000] libata version 1.11 loaded. [4294670.041000] ata_piix version 1.03 [4294670.041000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 [4294670.041000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [4294670.041000] ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 18 [4294670.041000] ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 18 [4294670.249000] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f [4294670.249000] ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 [4294670.249000] ata1: dev 0 configured for UDMA/133 [4294670.249000] scsi0 : ata_piix [4294670.457000] ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f [4294670.457000] ata2: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 [4294670.457000] ata2: dev 0 configured for UDMA/133 [4294670.457000] scsi1 : ata_piix [4294670.457000] Vendor: ATA Model: ST3120026AS Rev: 3.05 [4294670.457000] Type: Direct-Access ANSI SCSI revision: 05 [4294670.458000] Vendor: ATA Model: ST3120026AS Rev: 3.05 [4294670.458000] Type: Direct-Access ANSI SCSI revision: 05 [4294670.465000] ICH5: IDE controller at PCI slot 0000:00:1f.1 [4294670.465000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [4294670.465000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [4294670.465000] ICH5: chipset revision 2 [4294670.465000] ICH5: not 100% native mode: will probe irqs later [4294670.465000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio [4294670.465000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA [4294670.465000] Probing IDE interface ide0... [4294670.984000] Probing IDE interface ide1... [4294671.910000] hdd: AOPEN 16XDVD-ROM/AMH 20011108, ATAPI CD/DVD-ROM drive [4294671.961000] ide1 at 0x170-0x177,0x376 on irq 15 [4294671.961000] Probing IDE interface ide0... [4294672.480000] Probing IDE interface ide2... [4294672.992000] Probing IDE interface ide3... [4294673.504000] Probing IDE interface ide4... [4294674.016000] Probing IDE interface ide5... [4294674.532000] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache [4294674.532000] Uniform CD-ROM driver Revision: 3.20 [4294674.538000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [4294674.538000] SCSI device sda: drive cache: write back [4294674.538000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) [4294674.538000] SCSI device sda: drive cache: write back [4294674.538000] /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 > [4294674.569000] Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 [4294674.569000] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [4294674.569000] SCSI device sdb: drive cache: write back [4294674.569000] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) [4294674.569000] SCSI device sdb: drive cache: write back [4294674.569000] /dev/scsi/host1/bus0/target0/lun0: unknown partition table [4294674.578000] Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 [4294674.864000] Attempting manual resume [4294674.864000] swsusp: Suspend partition has wrong signature? [4294674.893000] usbcore: registered new driver usbfs [4294674.893000] usbcore: registered new driver hub [4294674.894000] USB Universal Host Controller Interface driver v2.2 [4294674.894000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [4294674.894000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [4294674.894000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [4294674.956000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [4294674.956000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000eec0 [4294674.956000] hub 1-0:1.0: USB hub found [4294674.956000] hub 1-0:1.0: 2 ports detected [4294674.959000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [4294674.959000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [4294674.959000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [4294675.021000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [4294675.021000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef00 [4294675.021000] hub 2-0:1.0: USB hub found [4294675.021000] hub 2-0:1.0: 2 ports detected [4294675.024000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [4294675.024000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [4294675.024000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3 [4294675.086000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [4294675.086000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef20 [4294675.086000] hub 3-0:1.0: USB hub found [4294675.086000] hub 3-0:1.0: 2 ports detected [4294675.089000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [4294675.089000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [4294675.089000] uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [4294675.125000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [4294675.151000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [4294675.151000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef40 [4294675.151000] hub 4-0:1.0: USB hub found [4294675.151000] hub 4-0:1.0: 2 ports detected [4294675.181000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [4294675.181000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [4294675.181000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [4294675.181000] ehci_hcd 0000:00:1d.7: debug port 1 [4294675.181000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [4294675.181000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800 [4294675.185000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [4294675.185000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [4294675.185000] hub 5-0:1.0: USB hub found [4294675.185000] hub 5-0:1.0: 8 ports detected [4294675.267000] Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 [4294675.267000] Copyright (c) 1999-2004 Intel Corporation. [4294675.267000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18 [4294675.267000] PCI: Setting latency timer of device 0000:02:01.0 to 64 [4294675.587000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [4294675.773000] usb 1-1: new low speed USB device using uhci_hcd and address 3 [4294676.069000] usb 1-2: new low speed USB device using uhci_hcd and address 4 [4294677.623000] usbcore: registered new driver hiddev [4294677.643000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1 [4294677.661000] input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-2 [4294677.692000] input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-2 [4294677.692000] usbcore: registered new driver usbhid [4294677.692000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver [4294678.230000] ACPI: CPU0 (power states: C1[C1]) [4294678.409000] Attempting manual resume [4294678.409000] swsusp: Suspend partition has wrong signature? [4294678.422000] kjournald starting. Commit interval 5 seconds [4294678.422000] EXT3-fs: mounted filesystem with ordered data mode. [4294679.385000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294682.649000] Adding 4771264k swap on /dev/sda5. Priority:-1 extents:1 [4294682.901000] EXT3 FS on sda1, internal journal [4294687.813000] parport: PnPBIOS parport detected. [4294687.813000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [4294687.901000] lp0: using parport0 (interrupt-driven). [4294687.937000] mice: PS/2 mouse device common for all mice [4294687.971000] ieee1394: Initialized config rom entry `ip1394' [4294687.976000] sbp2: $Rev: 1219 $ Ben Collins [4294690.771000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294691.508000] cdrom: open failed. [4294693.216000] Linux agpgart interface v0.101 (c) Dave Jones [4294693.225000] agpgart: Detected an Intel i875 Chipset. [4294693.244000] agpgart: AGP aperture is 64M @ 0xf8000000 [4294693.325000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294693.336000] shpchp: shpc_init : shpc_cap_offset == 0 [4294693.336000] shpchp: shpc_init : shpc_cap_offset == 0 [4294693.336000] shpchp: shpc_init : shpc_cap_offset == 0 [4294693.336000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294693.737000] hw_random hardware driver 1.0.0 loaded [4294694.216000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 [4294694.216000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [4294694.570000] AC'97 0 analog subsections not ready [4294694.630000] intel8x0_measure_ac97_clock: measured 49133 usecs [4294694.630000] intel8x0: clocking to 48000 [4294695.312000] ohci1394: $Rev: 1250 $ Ben Collins [4294695.312000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 20 [4294695.312000] PCI: Via IRQ fixup for 0000:03:03.0, from 11 to 4 [4294695.370000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f7eff800-f7efffff] Max Packet=[2048] [4294695.493000] Linux video capture interface: v1.00 [4294695.546000] cx2388x v4l2 driver version 0.0.4 loaded [4294695.550000] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 [4294695.550000] cx88[0]: Your board isn't known (yet) to the driver. You can [4294695.550000] cx88[0]: try to pick one of the existing card configs via [4294695.550000] cx88[0]: card= insmod option. Updating to the latest [4294695.550000] cx88[0]: version might help as well. [4294695.550000] cx88[0]: Here is a list of valid choices for the card= insmod option: [4294695.550000] cx88[0]: card=0 -> UNKNOWN/GENERIC [4294695.550000] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models [4294695.550000] cx88[0]: card=2 -> GDI Black Gold [4294695.550000] cx88[0]: card=3 -> PixelView [4294695.550000] cx88[0]: card=4 -> ATI TV Wonder Pro [4294695.550000] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert [4294695.550000] cx88[0]: card=6 -> AverTV Studio 303 (M126) [4294695.550000] cx88[0]: card=7 -> MSI TV-@nywhere Master [4294695.550000] cx88[0]: card=8 -> Leadtek Winfast DV2000 [4294695.550000] cx88[0]: card=9 -> Leadtek PVR 2000 [4294695.550000] cx88[0]: card=10 -> IODATA GV-VCP3/PCI [4294695.550000] cx88[0]: card=11 -> Prolink PlayTV PVR [4294695.550000] cx88[0]: card=12 -> ASUS PVR-416 [4294695.550000] cx88[0]: card=13 -> MSI TV-@nywhere [4294695.550000] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T [4294695.550000] cx88[0]: card=15 -> DVICO FusionHDTV DVB-T1 [4294695.550000] cx88[0]: card=16 -> KWorld LTV883RF [4294695.550000] cx88[0]: card=17 -> DViCO - FusionHDTV 3 Gold [4294695.550000] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T [4294695.550000] cx88[0]: card=19 -> Conexant DVB-T reference design [4294695.550000] cx88[0]: card=20 -> Provideo PV259 [4294695.550000] cx88[0]: card=21 -> DVICO FusionHDTV DVB-T Plus [4294695.550000] cx88[0]: card=22 -> pcHDTV HD3000 HDTV [4294695.550000] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T [4294695.550000] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models [4294695.550000] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC) [4294695.550000] cx88[0]: card=26 -> IODATA GV/BCTV7E [4294695.550000] cx88[0]: subsystem: 14f1:0084, board: UNKNOWN/GENERIC [card=0,autodetected] [4294695.715000] cx88[0]/0: found at 0000:03:0a.0, rev: 3, irq: 22, latency: 64, mmio: 0xf5000000 [4294695.787000] cx88[0]/0: registered device video0 [v4l2] [4294695.803000] cx88[0]/0: registered device vbi0 [4294695.944000] cx2388x dvb driver version 0.0.4 loaded [4294695.996000] cx2388x blackbird driver version 0.0.4 loaded [4294696.634000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000235d10][4294697.543000] Real Time Clock Driver v1.12 [4294697.619000] input: PC Speaker [4294697.776000] Floppy drive(s): fd0 is 1.44M [4294697.791000] FDC 0 is a post-1991 82077 [4294698.260000] ts: Compaq touchscreen protocol output [4294700.311000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 10 Mbps Full Duplex [4294700.321000] NET: Registered protocol family 17 [4294707.956000] NET: Registered protocol family 10 [4294707.956000] Disabled Privacy Extensions on device c02eb280(lo) [4294707.956000] IPv6 over IPv4 tunneling driver [4294709.387000] ACPI: Power Button (FF) [PWRF] [4294709.387000] ACPI: Power Button (CM) [PWRB] [4294709.483000] ibm_acpi: ec object not found [4294716.736000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [4294716.743000] [fglrx] Maximum main memory to use for locked dma buffers: 1414 MBytes. [4294716.743000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [4294716.743000] [fglrx] module loaded - fglrx 8.16.20 [Aug 16 2005] on minor 0 [4294716.757000] [fglrx] Internal AGP support requested, but kernel AGP support active. [4294716.757000] [fglrx] Have to use kernel AGP support to avoid conflicts. [4294716.757000] [fglrx] Kernel AGP support doesn't provide agplock functionality. [4294716.757000] [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset) [4294716.758000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [4294716.758000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [4294716.758000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [4294716.758000] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps) [4294716.768000] [fglrx] free AGP = 51113984 [4294716.768000] [fglrx] max AGP = 51113984 [4294716.768000] [fglrx] free LFB = 122679296 [4294716.768000] [fglrx] max LFB = 122679296 [4294716.768000] [fglrx] free Inv = 134217728 [4294716.768000] [fglrx] max Inv = 134217728 [4294716.768000] [fglrx] total Inv = 134217728 [4294716.768000] [fglrx] total TIM = 0 [4294716.768000] [fglrx] total FB = 0 [4294716.768000] [fglrx] total AGP = 16384 [4294717.491000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [4294717.491000] apm: overridden by ACPI. [4294718.606000] eth0: no IPv6 routers present [4294722.221000] Bluetooth: Core ver 2.7 [4294722.221000] NET: Registered protocol family 31 [4294722.221000] Bluetooth: HCI device and connection manager initialized [4294722.221000] Bluetooth: HCI socket layer initialized [4294722.236000] Bluetooth: L2CAP ver 2.7 [4294722.236000] Bluetooth: L2CAP socket layer initialized [4294722.257000] Bluetooth: RFCOMM ver 1.5 [4294722.258000] Bluetooth: RFCOMM socket layer initialized [4294722.258000] Bluetooth: RFCOMM TTY layer initialized