jeremy-laptop:/home/jeremy# smartctl -a /dev/hda smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST9120822A Serial Number: 5LZ005KF Firmware Version: 3.ALA User Capacity: 120.034.123.776 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Tue Jan 29 19:15:29 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 111) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 102 100 034 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2752 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 169582607 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3997 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2730 187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 189 Unknown_Attribute 0x003a 072 072 000 Old_age Always - 28 190 Temperature_Celsius 0x0022 066 049 045 Old_age Always - 589234210 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1332 193 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 30794 194 Temperature_Celsius 0x0022 034 051 000 Old_age Always - 34 (Lifetime Min/Max 0/13) 195 Hardware_ECC_Recovered 0x001a 063 048 000 Old_age Always - 95527763 197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295 198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 6 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 07 c0 d3 14 e7 Error: UNC at LBA = 0x0714d3c0 = 118805440 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 08 bf d3 14 e7 00 00:01:30.693 READ MULTIPLE c4 00 08 b7 d3 14 e7 00 00:01:30.690 READ MULTIPLE c4 00 08 af d3 14 e7 00 00:01:30.687 READ MULTIPLE c4 00 08 a7 d3 14 e7 00 00:01:30.726 READ MULTIPLE c4 00 08 9f d3 14 e7 00 00:01:30.723 READ MULTIPLE Error 5 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf c0 d3 14 e7 Error: UNC at LBA = 0x0714d3c0 = 118805440 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 00 7f d3 14 e7 00 00:01:08.621 READ MULTIPLE c4 00 00 7f d2 14 e7 00 00:01:08.536 READ MULTIPLE c4 00 00 7f d1 14 e7 00 00:01:08.453 READ MULTIPLE c4 00 00 7f d0 14 e7 00 00:01:08.369 READ MULTIPLE c4 00 00 7f cf 14 e7 00 00:01:08.285 READ MULTIPLE Error 4 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 bf d3 14 e7 00 00:00:48.068 READ DMA c8 00 08 b7 d3 14 e7 00 00:00:48.071 READ DMA c8 00 08 af d3 14 e7 00 00:00:48.071 READ DMA c8 00 08 a7 d3 14 e7 00 00:00:48.070 READ DMA c8 00 08 9f d3 14 e7 00 00:00:48.070 READ DMA Error 3 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 7f d3 14 e7 00 00:00:44.314 READ DMA c8 00 00 7f d2 14 e7 00 00:00:44.310 READ DMA c8 00 00 7f d1 14 e7 00 00:00:44.307 READ DMA c8 00 00 7f d0 14 e7 00 00:00:44.304 READ DMA c8 00 00 7f cf 14 e7 00 00:00:44.299 READ DMA Error 2 occurred at disk power-on lifetime: 2200 hours (91 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 c6 d3 14 e7 Error: UNC at LBA = 0x0714d3c6 = 118805446 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 bf d3 14 e7 00 00:00:51.958 READ DMA c8 00 08 b7 d3 14 e7 00 00:00:51.958 READ DMA c8 00 08 af d3 14 e7 00 00:00:51.957 READ DMA c8 00 08 a7 d3 14 e7 00 00:00:51.957 READ DMA c8 00 08 9f d3 14 e7 00 00:00:51.957 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 62 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.