drasko@Lenin:~/dmel$ qemu -hda rootfs.img -kernel bzImage -append "root=/dev/hda clock=pit console=ttyS0" -serial stdio Could not open '/dev/kqemu' - QEMU acceleration layer not activated: No such file or directory header magic: 0x53726448 qemu: real_addr = 0x10000 qemu: cmdline_addr = 0x20000 qemu: prot_addr = 0x100000 Linux version 2.6.23 (root@Lenin) (gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4)) #1 SMP Mon Jan 28 22:37:53 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 127MB LOWMEM available. found SMP MP-table at 000faa20 Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 32752 HighMem 32752 -> 32752 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 32752 DMI not present or invalid. Using APIC driver default ACPI: RSDP 000FAA30, 0014 (r0 BOCHS ) ACPI: RSDT 07FF0000, 002C (r0 BOCHS BXPCRSDT 1 BXPC 1) ACPI: FACP 07FF002C, 0074 (r0 BOCHS BXPCFACP 1 BXPC 1) ACPI: DSDT 07FF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912) ACPI: FACS 07FF00C0, 0040 ACPI: APIC 07FF0938, 0040 (r0 BOCHS BXPCAPIC 1 BXPC 1) ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: BOCHSCPU Product ID: 0.1 APIC at: 0xFEE00000 Processor #0 6:0 APIC version 17 I/O APIC #1 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 10000000 (gap: 08000000:f7fc0000) Built 1 zonelists in Zone order. Total pages: 32497 Kernel command line: root=/dev/hda clock=pit console=ttyS0 Warning! clock= boot option is deprecated. Use clocksource=xyz Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 512 (order: 9, 2048 bytes) Detected 1542.957 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 123436k/131008k available (3200k kernel code, 7036k reserved, 1606k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe14000 - 0xfffff000 (1964 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB) lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB) .init : 0xc05b9000 - 0xc05fa000 ( 260 kB) .data : 0xc0420356 - 0xc05b1dac (1606 kB) .text : 0xc0100000 - 0xc0420356 (3200 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2897.92 BogoMIPS (lpj=5795844) Mount-cache hash table entries: 512 CPU: L1 I cache: 8K CPU: L2 cache: 128K Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 18k freed CPU0: Intel Pentium II (Klamath) stepping 03 Total of 1 processors activated (2897.92 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 APIC timer disabled due to verification failure. Brought up 1 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfa3e0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region b000-b03f claimed by PIIX4 ACPI PCI quirk: region b100-b10f claimed by PIIX4 SMB PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 PCI BIOS passed nonexistent PCI bus 0! PCI BIOS passed nonexistent PCI bus 0! Time: pit clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 49152 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Activating ISA DMA hang workarounds. Clocksource tsc unstable (delta = 77518978 ns) Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 FDC 0 is a S82078B RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX3: IDE controller at PCI slot 0000:00:01.1 PIIX3: chipset revision 0 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio hda: QEMU HARDDISK, ATA DISK drive hda: applying conservative PIO "downgrade" ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 20480 sectors (10 MB) w/256KiB Cache, CHS=20/255/63, (U)DMA hda: cache flushes supported hda: hdc: ATAPI 4X CD-ROM drive, 512kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 3ware Storage Controller device driver for Linux v1.26.02.002. Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Using IPI No-Shortcut mode input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 260k freed Kernel panic - not syncing: No init found. Try passing init= option to kernel. drasko@Lenin:~/dmel$