suse:/etc/udev/rules.d # cat 70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line. # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:96:8b:94", NAME="eth0" # PCI device 0x14e4:0x4311 (bcm43xx) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:00:1a:73:68", NAME="eth1" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:fc:b5:82", NAME="eth2" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:69:8a:36", NAME="eth3" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:95:4c:07", NAME="eth4" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:75:46:31", NAME="eth5" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:13:0e:91", NAME="eth6" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:db:7b:f5", NAME="eth7" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:29:af:9c", NAME="eth8" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:07:43:71", NAME="eth9" # PCI device 0x10de:0x054c (forcedeth) SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:00:6c:dc:20:bd", NAME="eth10" dmesg ---------------- suse:/etc/udev/rules.d # dmesg Linux version 2.6.22.16-0.2-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/01 19:36:55 UTC Command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120NZ1DT762RJWV-part3 vga=0x317 resume=/dev/sda1 splash=silent BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bf50000 (usable) BIOS-e820: 000000003bf50000 - 000000003bf65000 (ACPI data) BIOS-e820: 000000003bf65000 - 000000003bf66000 (ACPI NVS) BIOS-e820: 000000003bf66000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 245584) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F8250, 0024 (r2 PTLTD ) ACPI: XSDT 3BF5C61E, 006C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) ACPI: FACP 3BF649FC, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240) ACPI: DSDT 3BF5C68A, 82FE (r1 NVIDIA MCP67 6040000 MSFT 3000000) ACPI: FACS 3BF65FC0, 0040 ACPI: TCPA 3BF64AF0, 0032 (r1 Phoeni x 6040000 TL 0) ACPI: SRAT 3BF64B22, 00A0 (r1 AMD HAMMER 6040000 AMD 1) ACPI: SSDT 3BF64BC2, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1) ACPI: MCFG 3BF64D86, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: HPET 3BF64DC2, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) ACPI: APIC 3BF64DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT 3BF64E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SLIC 3BF64E8A, 0176 (r1 HPQOEM SLIC-MPC 6040000 LTP 1) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: Node 0 PXM 0 0-a0000 Entering add_active_range(0, 0, 158) 0 entries of 3200 used SRAT: Node 0 PXM 0 0-40000000 Entering add_active_range(0, 0, 158) 1 entries of 3200 used Entering add_active_range(0, 256, 245584) 1 entries of 3200 used NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-000000003bf50000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 245584 On node 0 totalpages: 245486 DMA zone: 56 pages used for memmap DMA zone: 1270 pages reserved DMA zone: 2672 pages, LIFO batch:0 DMA32 zone: 3301 pages used for memmap DMA32 zone: 238187 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x10de8201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 50296 bytes of per cpu data Built 1 zonelists. Total pages: 240859 Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120NZ1DT762RJWV-part3 vga=0x317 resume=/dev/sda1 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1700.159 MHz processor. Console: colour dummy device 80x25 Checking aperture... CPU 0: aperture @ 0 size 32 MB No AGP bridge found Memory: 958848k/982336k available (2053k kernel code, 23096k reserved, 1017k data, 316k init) Calibrating delay using timer specific routine.. 3403.77 BogoMIPS (lpj=6807544) Security Framework v1.0.0 initialized Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 4381k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 890 Objects with 89 Devices 278 Methods 34 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 8 Objects with 0 Devices 0 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. result 12501182 Detected 12.501 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3400.44 BogoMIPS (lpj=6800898) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01 Brought up 2 CPUs migration_cost=131 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e04fffff PCI: No mmconfig possible on device 00:18 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................................................................. Initialized 34/34 Regions 6/6 Fields 45/45 Buffers 28/43 Packages (907 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org . Executed 1 _INI methods requiring 1 _STA executions (examined 96 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:08.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 ACPI: PCI Interrupt Link [LSMB] (IRQs *10) ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 ACPI: PCI Interrupt Link [Z015] (IRQs 18) *5 ACPI: PCI Interrupt Link [Z016] (IRQs 22) *10 ACPI: PCI Interrupt Link [LPMU] (IRQs *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz ACPI: RTC can wake from S4 pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:03: ioport range 0x1000-0x107f has been reserved pnp: 00:03: ioport range 0x1080-0x10ff has been reserved pnp: 00:03: ioport range 0x1400-0x147f has been reserved pnp: 00:03: ioport range 0x1480-0x14ff has been reserved pnp: 00:03: ioport range 0x1800-0x187f has been reserved pnp: 00:03: ioport range 0x1880-0x18ff has been reserved pnp: 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved PCI: Bridge: 0000:00:08.0 IO window: disabled. MEM window: f6100000-f61fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: 4000-4fff MEM window: f2000000-f3ffffff PREFETCH window: f0000000-f1ffffff PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: f6000000-f60fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:08.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 NET: Registered protocol family 2 Time: hpet clocksource has been installed. IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1202512498.476:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:12.0 PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000b80000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 78436 bytes bootsplash: ...found (1024x768, 28133 bytes, v3). Console: switching to colour frame buffer device 124x44 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 NET: Registered protocol family 1 Freeing unused kernel memory: 316k freed ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (thermal-0318): AE_BAD_DATA, No critical threshold [20070126] SCSI subsystem initialized libata version 3.00 loaded. pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi0 : pata_amd scsi1 : pata_amd ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000130c0 irq 14 ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000130c8 irq 15 ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2 ata1.00: configured for MWDMA2 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5 ahci 0000:00:09.0: version 3.0 ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 23 ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:09.0 to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 cmd 0xffffc200001f8100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349 ata4: SATA max UDMA/133 cmd 0xffffc200001f8180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349 ata5: SATA max UDMA/133 cmd 0xffffc200001f8200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349 ata6: SATA max UDMA/133 cmd 0xffffc200001f8280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4349 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 ata3.00: 234441648 sectors, multi 16: LBA48 ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd usb usb1: SerialNumber: 0000:00:02.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 7 ports detected sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:ACPI: PCI Interrupt Link [Z016] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z016] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.1 to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:04.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:04.1 ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 sda1 sda2 <<6>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.16-0.2-default ehci_hcd usb usb2: SerialNumber: 0000:00:04.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sda5 > sda3 sda4 sd 2:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.16-0.2-default ohci_hcd usb usb3: SerialNumber: 0000:00:02.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 7 ports detected ACPI: PCI Interrupt Link [Z015] enabled at IRQ 18 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z015] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:04.0 to 64 ohci_hcd 0000:00:04.0: OHCI Host Controller ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 usb 2-2: new high speed USB device using ehci_hcd and address 2 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.16-0.2-default ohci_hcd usb usb4: SerialNumber: 0000:00:04.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new device found, idVendor=04f2, idProduct=b015 usb 2-2: new device strings: Mfr=2, Product=1, SerialNumber=3 usb 2-2: Product: HP Webcam usb 2-2: Manufacturer: Chicony Electronics Co., Ltd. usb 2-2: SerialNumber: SN0001 usb 2-2: configuration #1 chosen from 1 choice usb 3-4: new low speed USB device using ohci_hcd and address 2 swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume usb 3-4: new device found, idVendor=046d, idProduct=c512 usb 3-4: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-4: Product: USB Receiver usb 3-4: Manufacturer: Logitech usb 3-4: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-4 input: Logitech USB Receiver as /class/input/input4 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA 0000:00:0a.0: Invalid Mac address detected: 2b:66:65:24:1b:00 Please complain to your hardware vendor. Switching to a random MAC. Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b015) usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation bcm43xx driver rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:07 failed with error -16 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input8 ACPI: Power Button (CM) [PWRB] ACPI: AC Adapter [ACAD] (on-line) eth0: forcedeth.c: subsystem: 0103c:30cf bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:03:00.0 to 64 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray bcm43xx: Chip ID 0x4311, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x13, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xd, vendor 0x4243 bcm43xx: Unsupported 80211 core revision 13 bcm43xx: Core 2: ID 0x817, rev 0x4, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x5, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 9 bcm43xx: Invalid PHY Revision 9 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 ACPI: Battery Slot [BAT0] (battery present) ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:07.0 to 64 sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 mmc0: SDHCI at 0xf6100800 irq 7 DMA ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:12.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 eth0 renamed to eth10 udev: renamed network interface eth0 to eth10 Adding 1445808k swap on /dev/sda1. Priority:-1 extents:1 across:1445808k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00ca103200] loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.8) AppArmor: AppArmor initialized audit(1202512512.428:2): type=1505 info="AppArmor initialized" pid=2239 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 processors (version 2.00.00) powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13 powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a bcm43xx: PHY connected bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) audit(1202512534.464:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1 audit(1202512534.484:4): audit_pid=3056 old=0 by auid=4294967295 bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 bootsplash: status on console 0 changed to on eth10: no IPv6 routers present bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. bcm43xx: core_up for active 802.11 core failed (-2) SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0