smartctl -a /dev/hdb smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Warning! Drive Identity Structure error: invalid SMART checksum. === START OF INFORMATION SECTION === Device Model: ST320414A Serial Number: 3EC0SK7K Firmware Version: 3.28 User Capacity: 20,003,618,816 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 4 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Feb 13 15:28:02 2008 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled Warning! SMART Attribute Data Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 17) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000e 073 057 025 Old_age Always - 207492871 3 Spin_Up_Time 0x0002 083 070 000 Old_age Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1111 5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0 7 Seek_Error_Rate 0x000e 082 060 030 Old_age Always - 170190129 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6163 10 Spin_Retry_Count 0x0012 100 100 097 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1638 194 Temperature_Celsius 0x0022 036 060 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 070 058 000 Old_age Always - 107922735 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 072 179 000 Old_age Always - 77 200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 165 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 165 occurred at disk power-on lifetime: 6163 hours (256 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 48 00 20 00 00 00 f0 00 00:04:24.509 [RESERVED] 48 00 20 00 00 00 f0 00 00:04:23.853 [RESERVED] 10 00 3f 00 00 00 f0 00 00:04:23.851 RECALIBRATE [OBS-4] 48 00 20 00 00 00 f0 00 00:04:23.208 [RESERVED] 48 00 20 00 00 00 f0 00 00:04:22.545 [RESERVED] Error 164 occurred at disk power-on lifetime: 6163 hours (256 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 48 00 20 00 00 00 f0 00 00:04:23.853 [RESERVED] 10 00 3f 00 00 00 f0 00 00:04:23.851 RECALIBRATE [OBS-4] 48 00 20 00 00 00 f0 00 00:04:23.208 [RESERVED] 48 00 20 00 00 00 f0 00 00:04:22.545 [RESERVED] 46 00 10 00 00 00 f0 00 00:04:22.545 [RESERVED] Error 163 occurred at disk power-on lifetime: 6163 hours (256 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 48 00 20 00 00 00 f0 00 00:04:23.208 [RESERVED] 48 00 20 00 00 00 f0 00 00:04:22.545 [RESERVED] 46 00 10 00 00 00 f0 00 00:04:22.545 [RESERVED] 10 00 3f 00 00 00 f0 00 00:04:22.544 RECALIBRATE [OBS-4] 11 00 3f 3f ff 3f ff 00 00:04:22.544 RECALIBRATE [RET-4] Error 162 occurred at disk power-on lifetime: 6163 hours (256 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 48 00 20 00 00 00 f0 00 00:04:22.545 [RESERVED] 46 00 10 00 00 00 f0 00 00:04:22.545 [RESERVED] 10 00 3f 00 00 00 f0 00 00:04:22.544 RECALIBRATE [OBS-4] 11 00 3f 3f ff 3f ff 00 00:04:22.544 RECALIBRATE [RET-4] 00 00 00 00 00 00 00 06 00:04:22.506 NOP [Abort queued commands] Error 161 occurred at disk power-on lifetime: 6163 hours (256 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 00 00 00 00 f0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 48 00 20 00 00 00 f0 00 00:03:49.260 [RESERVED] 48 00 20 00 00 00 f0 00 00:03:48.581 [RESERVED] 10 00 3f 00 00 00 f0 00 00:03:48.581 RECALIBRATE [OBS-4] 48 00 20 00 00 00 f0 00 00:03:48.122 [RESERVED] 48 00 20 00 00 00 f0 00 00:03:47.660 [RESERVED] Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 6163 1503825 Device does not support Selective Self Tests/Logging