Restarting T203 counter
-- Retrying poll with f-bit
Sending Receiver Ready (0)

> [ 00 01 01 01 ]

> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
-- Retrying poll with f-bit
Sending Receiver Ready (0)
pbx-1*CLI> p
> [ 00 01 01 01 ]
pbx-1*CLI> p
> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
-- Retrying poll with f-bit
-- Timeout occured, restarting PRI
Sending Set Asynchronous Balanced Mode Extended
pbx-1*CLI> pro no
> [ 00 01 7f ]
pbx-1*CLI> pro no
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
  == Primary D-Channel on span 1 down
Feb 19 14:29:20 WARNING[20715]: chan_zap.c:2441 pri_find_dchan: No D-channels available!  Using Primary channel 24 as D-channel anyway!
pbx-1*CLI> pro no
< [ 00 01 73 ]
pbx-1*CLI> pro no
< Unnumbered frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
<   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
-- Got UA from network peer  Link up.
-- Restarting T203 counter
  == Primary D-Channel on span 1 up
pbx-1*CLI> pro no intense debug span 1
No such command 'pro' (type 'help' for help)
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (0)debug span 1
pbx-1*CLI> pro no intense debug span 1
> [ 00 01 01 01 ]
pbx-1*CLI> pro no intense debug span 1
> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0e debug span 1
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counterdebug span 1
-- Retrying poll with f-bitebug span 1
Sending Receiver Ready (0)debug span 1
pbx-1*CLI> pri no intense debug span 1
> [ 00 01 01 01 ]
pbx-1*CLI> pri no intense debug span 1
> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0e debug span 1
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counterdebug span 1
pbx-1*CLI> pri no intense debug span 1
No such command 'pri no intense' (type 'help' for help)
-- Retrying poll with f-bit
Sending Receiver Ready (0)
pbx-1*CLI>
> [ 00 01 01 01 ]
pbx-1*CLI>
> Supervisory frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
> Zero: 0     S: 0 01: 1  [ RR (receive ready) ]
> N(R): 000 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
-- Retrying poll with f-bit
-- Timeout occured, restarting PRI
Sending Set Asynchronous Balanced Mode Extended
pbx-1*CLI>
> [ 00 01 7f ]
pbx-1*CLI>
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
  == Primary D-Channel on span 1 down
Feb 19 14:29:30 WARNING[20715]: chan_zap.c:2441 pri_find_dchan: No D-channels available!  Using Primary channel 24 as D-channel anyway!
Sending Set Asynchronous Balanced Mode Extended
pbx-1*CLI>
> [ 00 01 7f ]
pbx-1*CLI>
> Unnumbered frame:
> SAPI: 00  C/R: 0 EA: 0
>  TEI: 000        EA: 1
>   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous balanced mode extended) ]
> 0 bytes of data
pbx-1*CLI>
< [ 00 01 73 ]
pbx-1*CLI>
< Unnumbered frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 000        EA: 1
<   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
-- Got UA from network peer  Link up.
-