=== START OF INFORMATION SECTION === Model Family: Fujitsu MHT series Device Model: FUJITSU MHT2030AT Serial Number: NN32T4416AJ1 Firmware Version: 849B User Capacity: 30,005,821,440 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a Local Time is: Sun Feb 24 13:34:47 2008 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 220) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 43606 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 12386304 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 4684 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8568460083208 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 3499 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Seconds 0x0032 055 055 000 Old_age Always - 22585h+11m+54s 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2010 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 391 193 Load_Cycle_Count 0x0032 076 076 000 Old_age Always - 242556 194 Temperature_Celsius 0x0022 100 080 000 Old_age Always - 42 (Lifetime Min/Max 14/64) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 75 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 81891360776 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 3 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000f 100 068 060 Pre-fail Always - 24131 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533288120709 SMART Error Log Version: 1 ATA Error Count: 1325 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1325 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 ff 21 6e 01 30 e0 00 00:38:03.532 READ MULTIPLE c8 ff 21 6e 01 30 e0 00 00:37:58.535 READ DMA ef 03 45 ff ff 00 e0 00 00:37:58.511 SET FEATURES [Set transfer mode] ef 03 0c ff ff 00 e0 00 00:37:58.509 SET FEATURES [Set transfer mode] c6 ff 10 ff ff 00 e0 00 00:37:58.509 SET MULTIPLE MODE Error 1324 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 16 79 01 30 e0 Error: UNC 22 sectors at LBA = 0x00300179 = 3146105 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 ff 21 6e 01 30 e0 00 00:37:58.535 READ DMA ef 03 45 ff ff 00 e0 00 00:37:58.511 SET FEATURES [Set transfer mode] ef 03 0c ff ff 00 e0 00 00:37:58.509 SET FEATURES [Set transfer mode] c6 ff 10 ff ff 00 e0 00 00:37:58.509 SET MULTIPLE MODE 10 ff 50 3f 6b b1 e0 00 00:37:58.506 RECALIBRATE [OBS-4] Error 1323 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 ff 21 6e 01 30 e0 00 00:37:53.483 READ MULTIPLE c8 ff 21 6e 01 30 e0 00 00:37:48.497 READ DMA c8 ff 1f 4f 01 30 e0 00 00:37:48.485 READ DMA ef 03 45 ff ff 00 e0 00 00:37:48.461 SET FEATURES [Set transfer mode] ef 03 0c ff ff 00 e0 00 00:37:48.459 SET FEATURES [Set transfer mode] Error 1322 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 16 79 01 30 e0 Error: UNC 22 sectors at LBA = 0x00300179 = 3146105 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 ff 21 6e 01 30 e0 00 00:37:48.497 READ DMA c8 ff 1f 4f 01 30 e0 00 00:37:48.485 READ DMA ef 03 45 ff ff 00 e0 00 00:37:48.461 SET FEATURES [Set transfer mode] ef 03 0c ff ff 00 e0 00 00:37:48.459 SET FEATURES [Set transfer mode] c6 ff 10 ff ff 00 e0 00 00:37:48.459 SET MULTIPLE MODE Error 1321 occurred at disk power-on lifetime: 22399 hours (933 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 21 6e 01 30 e0 Error: UNC at LBA = 0x0030016e = 3146094 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 ff 21 6e 01 30 e0 00 00:37:43.433 READ MULTIPLE c8 ff 21 6e 01 30 e0 00 00:37:38.313 READ DMA ef 03 45 ff ff 00 e0 00 00:37:38.284 SET FEATURES [Set transfer mode] ef 03 0c ff ff 00 e0 00 00:37:38.283 SET FEATURES [Set transfer mode] c6 ff 10 ff ff 00 e0 00 00:37:38.282 SET MULTIPLE MODE SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.