pci: Feb 23 18:48:42 nobilx kernel: [ 906.151393] sky2 eth0: disabling interface Feb 23 18:48:42 nobilx kernel: [ 906.162331] sky2 eth0: enabling interface Feb 23 18:48:42 nobilx kernel: [ 906.172033] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 23 18:48:45 nobilx kernel: [ 909.199891] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 23 18:48:45 nobilx kernel: [ 909.206397] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 23 18:48:56 nobilx kernel: [ 919.893907] eth0: no IPv6 routers present Feb 23 18:50:35 nobilx kernel: [ 1019.161059] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 18:54:47 nobilx kernel: [ 1270.629836] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:02:07 nobilx kernel: [ 1709.788382] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:03:11 nobilx kernel: [ 1773.655209] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:06:55 nobilx kernel: [ 1996.684967] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:09:49 nobilx kernel: [ 2170.312661] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:10:39 nobilx kernel: [ 2220.333400] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:11:11 nobilx kernel: [ 2252.264930] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:12:09 nobilx kernel: [ 2310.112890] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:14:39 nobilx kernel: [ 2459.823867] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:14:47 nobilx kernel: [ 2467.675037] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:20:45 nobilx kernel: [ 2825.048723] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:21:21 nobilx kernel: [ 2860.972402] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:21:57 nobilx kernel: [ 2896.786894] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:23:27 nobilx kernel: [ 2986.590335] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:23:51 nobilx kernel: [ 3010.539563] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:24:33 nobilx kernel: [ 3052.576839] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:27:31 nobilx kernel: [ 3230.227906] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:27:37 nobilx kernel: [ 3236.388440] ip6_tables: (C) 2000-2006 Netfilter Core Team Feb 23 19:29:07 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 23 19:29:07 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 23 19:29:07 nobilx kernel: Symbols match kernel version 2.6.24. Feb 23 19:29:07 nobilx kernel: Loaded 34543 symbols from 79 modules. Feb 23 19:29:07 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 23 19:29:07 nobilx kernel: [ 0.000000] Command line: root=UUID=77b9cf07-8fe6-489e-ab9e-90c0c92923a6 ro quiet splash locale=de_DE Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 23 19:29:07 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 23 19:29:07 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 23 19:29:07 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 23 19:29:07 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 23 19:29:07 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 23 19:29:07 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 23 19:29:07 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 23 19:29:07 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 23 19:29:07 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 23 19:29:07 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 23 19:29:07 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 23 19:29:07 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 23 19:29:07 nobilx kernel: [ 0.000000] Processor #1 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 23 19:29:07 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 23 19:29:07 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 23 19:29:07 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 23 19:29:07 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 23 19:29:07 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 23 19:29:07 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 23 19:29:07 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 23 19:29:07 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=77b9cf07-8fe6-489e-ab9e-90c0c92923a6 ro quiet splash locale=de_DE Feb 23 19:29:07 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 23 19:29:07 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 23 19:29:07 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 23 19:29:07 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 23 19:29:07 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 23 19:29:07 nobilx kernel: [ 57.670694] time.c: Detected 2133.333 MHz processor. Feb 23 19:29:07 nobilx kernel: [ 57.671776] Console: colour VGA+ 80x25 Feb 23 19:29:07 nobilx kernel: [ 57.671779] console [tty0] enabled Feb 23 19:29:07 nobilx kernel: [ 57.671795] Checking aperture... Feb 23 19:29:07 nobilx kernel: [ 57.671802] Calgary: detecting Calgary via BIOS EBDA area Feb 23 19:29:07 nobilx kernel: [ 57.671804] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 23 19:29:07 nobilx kernel: [ 57.671805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 23 19:29:07 nobilx kernel: [ 57.710321] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 23 19:29:07 nobilx kernel: [ 57.748005] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 23 19:29:07 nobilx kernel: [ 57.748035] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 23 19:29:07 nobilx kernel: [ 57.824682] Calibrating delay using timer specific routine.. 4269.67 BogoMIPS (lpj=8539359) Feb 23 19:29:07 nobilx kernel: [ 57.824713] Security Framework initialized Feb 23 19:29:07 nobilx kernel: [ 57.824718] SELinux: Disabled at boot. Feb 23 19:29:07 nobilx kernel: [ 57.824728] AppArmor: AppArmor initialized Feb 23 19:29:07 nobilx kernel: [ 57.824732] Failure registering capabilities with primary security module. Feb 23 19:29:07 nobilx kernel: [ 57.825126] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 23 19:29:07 nobilx kernel: [ 57.827724] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 23 19:29:07 nobilx kernel: [ 57.828962] Mount-cache hash table entries: 256 Feb 23 19:29:07 nobilx kernel: [ 57.829093] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 23 19:29:07 nobilx kernel: [ 57.829095] CPU: L3 cache: 4096K Feb 23 19:29:07 nobilx kernel: [ 57.829097] CPU 0/0 -> Node 0 Feb 23 19:29:07 nobilx kernel: [ 57.829098] using mwait in idle threads. Feb 23 19:29:07 nobilx kernel: [ 57.829099] CPU: Physical Processor ID: 0 Feb 23 19:29:07 nobilx kernel: [ 57.829101] CPU: Processor Core ID: 0 Feb 23 19:29:07 nobilx kernel: [ 57.829106] CPU0: Thermal monitoring enabled (TM2) Feb 23 19:29:07 nobilx kernel: [ 57.829118] SMP alternatives: switching to UP code Feb 23 19:29:07 nobilx kernel: [ 57.829808] Early unpacking initramfs... done Feb 23 19:29:07 nobilx kernel: [ 58.159521] ACPI: Core revision 20070126 Feb 23 19:29:07 nobilx kernel: [ 58.159567] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 23 19:29:07 nobilx kernel: [ 58.255357] Using local APIC timer interrupts. Feb 23 19:29:07 nobilx kernel: [ 58.302236] APIC timer calibration result 16666661 Feb 23 19:29:07 nobilx kernel: [ 58.302238] Detected 16.666 MHz APIC timer. Feb 23 19:29:07 nobilx kernel: [ 58.302305] SMP alternatives: switching to SMP code Feb 23 19:29:07 nobilx kernel: [ 58.302905] Booting processor 1/2 APIC 0x1 Feb 23 19:29:07 nobilx kernel: [ 58.313300] Initializing CPU#1 Feb 23 19:29:07 nobilx kernel: [ 58.390241] Calibrating delay using timer specific routine.. 4266.68 BogoMIPS (lpj=8533377) Feb 23 19:29:07 nobilx kernel: [ 58.390247] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 23 19:29:07 nobilx kernel: [ 58.390248] CPU: L3 cache: 4096K Feb 23 19:29:07 nobilx kernel: [ 58.390250] CPU 1/1 -> Node 0 Feb 23 19:29:07 nobilx kernel: [ 58.390251] CPU: Physical Processor ID: 0 Feb 23 19:29:07 nobilx kernel: [ 58.390252] CPU: Processor Core ID: 0 Feb 23 19:29:07 nobilx kernel: [ 58.390257] CPU1: Thermal monitoring enabled (TM2) Feb 23 19:29:07 nobilx kernel: [ 58.390720] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 23 19:29:07 nobilx kernel: [ 58.390822] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 23 19:29:07 nobilx kernel: [ 58.410842] Brought up 2 CPUs Feb 23 19:29:07 nobilx kernel: [ 58.410908] CPU0 attaching sched-domain: Feb 23 19:29:07 nobilx kernel: [ 58.410910] domain 0: span 03 Feb 23 19:29:07 nobilx kernel: [ 58.410911] groups: 01 02 Feb 23 19:29:07 nobilx kernel: [ 58.410914] domain 1: span 03 Feb 23 19:29:07 nobilx kernel: [ 58.410915] groups: 03 Feb 23 19:29:07 nobilx kernel: [ 58.410917] CPU1 attaching sched-domain: Feb 23 19:29:07 nobilx kernel: [ 58.410918] domain 0: span 03 Feb 23 19:29:07 nobilx kernel: [ 58.410919] groups: 02 01 Feb 23 19:29:07 nobilx kernel: [ 58.410921] domain 1: span 03 Feb 23 19:29:07 nobilx kernel: [ 58.410922] groups: 03 Feb 23 19:29:07 nobilx kernel: [ 58.411107] net_namespace: 120 bytes Feb 23 19:29:07 nobilx kernel: [ 58.411434] Time: 18:28:44 Date: 02/23/08 Feb 23 19:29:07 nobilx kernel: [ 58.411476] NET: Registered protocol family 16 Feb 23 19:29:07 nobilx kernel: [ 58.411638] ACPI: bus type pci registered Feb 23 19:29:07 nobilx kernel: [ 58.411700] PCI: Using configuration type 1 Feb 23 19:29:07 nobilx kernel: [ 58.414585] ACPI: EC: Look up EC in DSDT Feb 23 19:29:07 nobilx kernel: [ 58.421383] ACPI: Interpreter enabled Feb 23 19:29:07 nobilx kernel: [ 58.421385] ACPI: (supports S0 S1 S3 S4 S5) Feb 23 19:29:07 nobilx kernel: [ 58.421399] ACPI: Using IOAPIC for interrupt routing Feb 23 19:29:07 nobilx kernel: [ 58.427190] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 23 19:29:07 nobilx kernel: [ 58.427750] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 23 19:29:07 nobilx kernel: [ 58.427753] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 23 19:29:07 nobilx kernel: [ 58.428223] PCI: Transparent bridge - 0000:00:1e.0 Feb 23 19:29:07 nobilx kernel: [ 58.428247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 23 19:29:07 nobilx kernel: [ 58.428400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 23 19:29:07 nobilx kernel: [ 58.428482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 23 19:29:07 nobilx kernel: [ 58.428604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 23 19:29:07 nobilx kernel: [ 58.428689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 23 19:29:07 nobilx kernel: [ 58.430968] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431190] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431302] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 23 19:29:07 nobilx kernel: [ 58.431412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 23 19:29:07 nobilx kernel: [ 58.431522] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431631] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 23 19:29:07 nobilx kernel: [ 58.431852] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 23 19:29:07 nobilx kernel: [ 58.431858] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 23 19:29:07 nobilx kernel: [ 58.431882] pnp: PnP ACPI init Feb 23 19:29:07 nobilx kernel: [ 58.431888] ACPI: bus type pnp registered Feb 23 19:29:07 nobilx kernel: [ 58.434891] pnp: PnP ACPI: found 13 devices Feb 23 19:29:07 nobilx kernel: [ 58.434893] ACPI: ACPI bus type pnp unregistered Feb 23 19:29:07 nobilx kernel: [ 58.435093] PCI: Using ACPI for IRQ routing Feb 23 19:29:07 nobilx kernel: [ 58.435095] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 23 19:29:07 nobilx kernel: [ 58.450396] NET: Registered protocol family 8 Feb 23 19:29:07 nobilx kernel: [ 58.450398] NET: Registered protocol family 20 Feb 23 19:29:07 nobilx kernel: [ 58.450434] PCI-GART: No AMD northbridge found. Feb 23 19:29:07 nobilx kernel: [ 58.450438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 23 19:29:07 nobilx kernel: [ 58.450442] hpet0: 3 64-bit timers, 14318180 Hz Feb 23 19:29:07 nobilx kernel: [ 58.451470] AppArmor: AppArmor Filesystem Enabled Feb 23 19:29:07 nobilx kernel: [ 58.451479] ACPI: RTC can wake from S4 Feb 23 19:29:07 nobilx kernel: [ 58.454393] Time: tsc clocksource has been installed. Feb 23 19:29:07 nobilx kernel: [ 58.454402] Switched to high resolution mode on CPU 0 Feb 23 19:29:07 nobilx kernel: [ 58.455011] Switched to high resolution mode on CPU 1 Feb 23 19:29:07 nobilx kernel: [ 58.462414] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462423] system 00:07: ioport range 0x290-0x297 has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462429] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462431] system 00:08: ioport range 0x800-0x87f has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462434] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462437] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462440] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462443] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462446] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462449] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462451] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462457] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462460] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462466] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462472] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462474] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 23 19:29:07 nobilx kernel: [ 58.462477] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462480] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462483] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 23 19:29:07 nobilx kernel: [ 58.462886] PCI: Bridge: 0000:00:01.0 Feb 23 19:29:07 nobilx kernel: [ 58.462888] IO window: b000-bfff Feb 23 19:29:07 nobilx kernel: [ 58.462891] MEM window: fa800000-fe8fffff Feb 23 19:29:07 nobilx kernel: [ 58.462893] PREFETCH window: bfe00000-dfdfffff Feb 23 19:29:07 nobilx kernel: [ 58.462895] PCI: Bridge: 0000:00:1c.0 Feb 23 19:29:07 nobilx kernel: [ 58.462896] IO window: disabled. Feb 23 19:29:07 nobilx kernel: [ 58.462900] MEM window: disabled. Feb 23 19:29:07 nobilx kernel: [ 58.462902] PREFETCH window: dfe00000-dfefffff Feb 23 19:29:07 nobilx kernel: [ 58.462906] PCI: Bridge: 0000:00:1c.5 Feb 23 19:29:07 nobilx kernel: [ 58.462908] IO window: c000-cfff Feb 23 19:29:07 nobilx kernel: [ 58.462911] MEM window: fe900000-fe9fffff Feb 23 19:29:07 nobilx kernel: [ 58.462914] PREFETCH window: disabled. Feb 23 19:29:07 nobilx kernel: [ 58.462917] PCI: Bridge: 0000:00:1e.0 Feb 23 19:29:07 nobilx kernel: [ 58.462918] IO window: disabled. Feb 23 19:29:07 nobilx kernel: [ 58.462922] MEM window: fea00000-feafffff Feb 23 19:29:07 nobilx kernel: [ 58.462924] PREFETCH window: disabled. Feb 23 19:29:07 nobilx kernel: [ 58.462936] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 23 19:29:07 nobilx kernel: [ 58.462939] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 58.462953] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 23 19:29:07 nobilx kernel: [ 58.462956] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 58.462970] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 23 19:29:07 nobilx kernel: [ 58.462974] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 23 19:29:07 nobilx kernel: [ 58.462982] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 58.462989] NET: Registered protocol family 2 Feb 23 19:29:07 nobilx kernel: [ 58.498546] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 23 19:29:07 nobilx kernel: [ 58.499612] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 23 19:29:07 nobilx kernel: [ 58.503504] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 23 19:29:07 nobilx kernel: [ 58.504097] TCP: Hash tables configured (established 524288 bind 65536) Feb 23 19:29:07 nobilx kernel: [ 58.504099] TCP reno registered Feb 23 19:29:07 nobilx kernel: [ 58.514549] checking if image is initramfs... it is Feb 23 19:29:07 nobilx kernel: [ 59.164892] Freeing initrd memory: 7831k freed Feb 23 19:29:07 nobilx kernel: [ 59.168142] audit: initializing netlink socket (disabled) Feb 23 19:29:07 nobilx kernel: [ 59.168154] audit(1203791325.392:1): initialized Feb 23 19:29:07 nobilx kernel: [ 59.169989] VFS: Disk quotas dquot_6.5.1 Feb 23 19:29:07 nobilx kernel: [ 59.170048] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 23 19:29:07 nobilx kernel: [ 59.170150] io scheduler noop registered Feb 23 19:29:07 nobilx kernel: [ 59.170152] io scheduler anticipatory registered Feb 23 19:29:07 nobilx kernel: [ 59.170153] io scheduler deadline registered Feb 23 19:29:07 nobilx kernel: [ 59.170237] io scheduler cfq registered (default) Feb 23 19:29:07 nobilx kernel: [ 59.234776] Boot video device is 0000:01:00.0 Feb 23 19:29:07 nobilx kernel: [ 59.234901] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 59.234927] assign_interrupt_mode Found MSI capability Feb 23 19:29:07 nobilx kernel: [ 59.234949] Allocate Port Service[0000:00:01.0:pcie00] Feb 23 19:29:07 nobilx kernel: [ 59.235011] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 59.235043] assign_interrupt_mode Found MSI capability Feb 23 19:29:07 nobilx kernel: [ 59.235069] Allocate Port Service[0000:00:1c.0:pcie00] Feb 23 19:29:07 nobilx kernel: [ 59.235095] Allocate Port Service[0000:00:1c.0:pcie02] Feb 23 19:29:07 nobilx kernel: [ 59.235165] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 23 19:29:07 nobilx kernel: [ 59.235196] assign_interrupt_mode Found MSI capability Feb 23 19:29:07 nobilx kernel: [ 59.235222] Allocate Port Service[0000:00:1c.5:pcie00] Feb 23 19:29:07 nobilx kernel: [ 59.235249] Allocate Port Service[0000:00:1c.5:pcie02] Feb 23 19:29:07 nobilx kernel: [ 59.255205] Real Time Clock Driver v1.12ac Feb 23 19:29:07 nobilx kernel: [ 59.255348] hpet_resources: 0xfed00000 is busy Feb 23 19:29:07 nobilx kernel: [ 59.255382] Linux agpgart interface v0.102 Feb 23 19:29:07 nobilx kernel: [ 59.255384] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 23 19:29:07 nobilx kernel: [ 59.255487] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 23 19:29:07 nobilx kernel: [ 59.255906] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 23 19:29:07 nobilx kernel: [ 59.256478] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 23 19:29:07 nobilx kernel: [ 59.256529] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 23 19:29:07 nobilx kernel: [ 59.256637] PNP: No PS/2 controller found. Probing ports directly. Feb 23 19:29:07 nobilx kernel: [ 59.259326] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 23 19:29:07 nobilx kernel: [ 59.259329] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 23 19:29:07 nobilx kernel: [ 59.270495] mice: PS/2 mouse device common for all mice Feb 23 19:29:07 nobilx kernel: [ 59.270534] cpuidle: using governor ladder Feb 23 19:29:07 nobilx kernel: [ 59.270536] cpuidle: using governor menu Feb 23 19:29:07 nobilx kernel: [ 59.270670] NET: Registered protocol family 1 Feb 23 19:29:07 nobilx kernel: [ 59.270709] registered taskstats version 1 Feb 23 19:29:07 nobilx kernel: [ 59.270779] Magic number: 12:538:494 Feb 23 19:29:07 nobilx kernel: [ 59.270834] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 23 19:29:07 nobilx kernel: [ 59.270840] Freeing unused kernel memory: 316k freed Feb 23 19:29:07 nobilx kernel: [ 60.424650] fuse init (API version 7.9) Feb 23 19:29:07 nobilx kernel: [ 60.432476] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 23 19:29:07 nobilx kernel: [ 60.432993] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 23 19:29:07 nobilx kernel: [ 60.433382] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 23 19:29:07 nobilx kernel: [ 60.433391] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 23 19:29:07 nobilx kernel: [ 60.586246] usbcore: registered new interface driver usbfs Feb 23 19:29:07 nobilx kernel: [ 60.586265] usbcore: registered new interface driver hub Feb 23 19:29:07 nobilx kernel: [ 60.592248] usbcore: registered new device driver usb Feb 23 19:29:07 nobilx kernel: [ 60.593463] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 23 19:29:07 nobilx kernel: [ 60.594520] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 23 19:29:07 nobilx kernel: [ 60.594526] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 60.594756] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Feb 23 19:29:07 nobilx kernel: [ 60.598662] ehci_hcd 0000:00:1a.7: debug port 1 Feb 23 19:29:07 nobilx kernel: [ 60.598667] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 23 19:29:07 nobilx kernel: [ 60.598675] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 23 19:29:07 nobilx kernel: [ 60.602601] USB Universal Host Controller Interface driver v3.0 Feb 23 19:29:07 nobilx kernel: [ 60.614765] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 23 19:29:07 nobilx kernel: [ 60.614858] usb usb1: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 60.614876] hub 1-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 60.614882] hub 1-0:1.0: 4 ports detected Feb 23 19:29:07 nobilx kernel: [ 60.673443] SCSI subsystem initialized Feb 23 19:29:07 nobilx kernel: [ 60.685359] libata version 3.00 loaded. Feb 23 19:29:07 nobilx kernel: [ 60.718853] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 23 19:29:07 nobilx kernel: [ 60.719775] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 23 19:29:07 nobilx kernel: [ 60.719780] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 60.719823] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Feb 23 19:29:07 nobilx kernel: [ 60.723726] ehci_hcd 0000:00:1d.7: debug port 1 Feb 23 19:29:07 nobilx kernel: [ 60.723731] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 23 19:29:07 nobilx kernel: [ 60.723739] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 23 19:29:07 nobilx kernel: [ 60.738759] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 23 19:29:07 nobilx kernel: [ 60.738841] usb usb2: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 60.738859] hub 2-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 60.738866] hub 2-0:1.0: 6 ports detected Feb 23 19:29:07 nobilx kernel: [ 60.842829] ahci 0000:00:1f.2: version 3.0 Feb 23 19:29:07 nobilx kernel: [ 60.842856] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 23 19:29:07 nobilx kernel: [ 60.958271] usb 1-3: new high speed USB device using ehci_hcd and address 2 Feb 23 19:29:07 nobilx kernel: [ 61.092679] usb 1-3: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 61.570265] usb 2-2: new high speed USB device using ehci_hcd and address 3 Feb 23 19:29:07 nobilx kernel: [ 61.702609] usb 2-2: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 61.702678] hub 2-2:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 61.702782] hub 2-2:1.0: 4 ports detected Feb 23 19:29:07 nobilx kernel: [ 61.846237] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 23 19:29:07 nobilx kernel: [ 61.846241] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 23 19:29:07 nobilx kernel: [ 61.846245] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 23 19:29:07 nobilx kernel: [ 61.846551] scsi0 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846588] scsi1 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846618] scsi2 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846650] scsi3 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846681] scsi4 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846711] scsi5 : ahci Feb 23 19:29:07 nobilx kernel: [ 61.846795] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 508 Feb 23 19:29:07 nobilx kernel: [ 61.846798] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 508 Feb 23 19:29:07 nobilx kernel: [ 61.846800] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 508 Feb 23 19:29:07 nobilx kernel: [ 61.846802] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 508 Feb 23 19:29:07 nobilx kernel: [ 61.846805] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 508 Feb 23 19:29:07 nobilx kernel: [ 61.846807] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 508 Feb 23 19:29:07 nobilx kernel: [ 62.022287] usb 2-2.3: new low speed USB device using ehci_hcd and address 4 Feb 23 19:29:07 nobilx kernel: [ 62.135862] usb 2-2.3: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 62.136548] usbcore: registered new interface driver libusual Feb 23 19:29:07 nobilx kernel: [ 62.139282] Initializing USB Mass Storage driver... Feb 23 19:29:07 nobilx kernel: [ 62.139339] scsi6 : SCSI emulation for USB Mass Storage devices Feb 23 19:29:07 nobilx kernel: [ 62.139386] usbcore: registered new interface driver usb-storage Feb 23 19:29:07 nobilx kernel: [ 62.139388] USB Mass Storage support registered. Feb 23 19:29:07 nobilx kernel: [ 62.139449] usb-storage: device found at 2 Feb 23 19:29:07 nobilx kernel: [ 62.139450] usb-storage: waiting for device to settle before scanning Feb 23 19:29:07 nobilx kernel: [ 62.147109] usbcore: registered new interface driver hiddev Feb 23 19:29:07 nobilx kernel: [ 62.149745] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.3/2-2.3:1.0/input/input1 Feb 23 19:29:07 nobilx kernel: [ 62.158224] ata1: SATA link down (SStatus 0 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 62.170742] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 23 19:29:07 nobilx kernel: [ 62.170754] usbcore: registered new interface driver usbhid Feb 23 19:29:07 nobilx kernel: [ 62.170757] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 23 19:29:07 nobilx kernel: [ 62.470182] ata2: SATA link down (SStatus 0 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 62.782164] ata3: SATA link down (SStatus 0 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 63.094149] ata4: SATA link down (SStatus 0 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 63.570128] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 63.572963] ata5.00: ATA-8: SAMSUNG HM12HII, CE100-09, max UDMA7 Feb 23 19:29:07 nobilx kernel: [ 63.572966] ata5.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 23 19:29:07 nobilx kernel: [ 63.573574] ata5.00: configured for UDMA/133 Feb 23 19:29:07 nobilx kernel: [ 64.046094] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 23 19:29:07 nobilx kernel: [ 64.205164] ata6.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 23 19:29:07 nobilx kernel: [ 64.205168] ata6.00: applying bridge limits Feb 23 19:29:07 nobilx kernel: [ 64.361145] ata6.00: configured for UDMA/33 Feb 23 19:29:07 nobilx kernel: [ 64.361264] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HM12HII CE10 PQ: 0 ANSI: 5 Feb 23 19:29:07 nobilx kernel: [ 64.362155] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 23 19:29:07 nobilx kernel: [ 64.362231] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 23 19:29:07 nobilx kernel: [ 64.362241] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 64.362245] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 64.362270] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Feb 23 19:29:07 nobilx kernel: [ 64.362297] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 23 19:29:07 nobilx kernel: [ 64.362396] usb usb3: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 64.362415] hub 3-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 64.362420] hub 3-0:1.0: 2 ports detected Feb 23 19:29:07 nobilx kernel: [ 64.368577] Driver 'sd' needs updating - please use bus_type methods Feb 23 19:29:07 nobilx kernel: [ 64.371178] Driver 'sr' needs updating - please use bus_type methods Feb 23 19:29:07 nobilx kernel: [ 64.374108] sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) Feb 23 19:29:07 nobilx kernel: [ 64.374120] sd 4:0:0:0: [sda] Write Protect is off Feb 23 19:29:07 nobilx kernel: [ 64.374123] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 23 19:29:07 nobilx kernel: [ 64.374140] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 23 19:29:07 nobilx kernel: [ 64.374190] sd 4:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) Feb 23 19:29:07 nobilx kernel: [ 64.374201] sd 4:0:0:0: [sda] Write Protect is off Feb 23 19:29:07 nobilx kernel: [ 64.374203] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 23 19:29:07 nobilx kernel: [ 64.374219] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 23 19:29:07 nobilx kernel: [ 64.374223] sda:<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 23 19:29:07 nobilx kernel: [ 64.466169] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 23 19:29:07 nobilx kernel: [ 64.466173] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 64.466194] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Feb 23 19:29:07 nobilx kernel: [ 64.466220] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 23 19:29:07 nobilx kernel: [ 64.466333] usb usb4: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 64.466350] hub 4-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 64.466355] hub 4-0:1.0: 2 ports detected Feb 23 19:29:07 nobilx kernel: [ 64.570627] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 23 19:29:07 nobilx kernel: [ 64.570634] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 64.570638] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 64.570657] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Feb 23 19:29:07 nobilx kernel: [ 64.570679] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 23 19:29:07 nobilx kernel: [ 64.570780] usb usb5: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 64.570812] hub 5-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 64.570816] hub 5-0:1.0: 2 ports detected Feb 23 19:29:07 nobilx kernel: [ 64.674148] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 23 19:29:07 nobilx kernel: [ 64.674156] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 23 19:29:07 nobilx kernel: [ 64.674159] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 64.674178] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Feb 23 19:29:07 nobilx kernel: [ 64.674203] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 23 19:29:07 nobilx kernel: [ 64.674305] usb usb6: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 64.674336] hub 6-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 64.674341] hub 6-0:1.0: 2 ports detected Feb 23 19:29:07 nobilx kernel: [ 64.778117] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 23 19:29:07 nobilx kernel: [ 64.778125] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 23 19:29:07 nobilx kernel: [ 64.778128] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 23 19:29:07 nobilx kernel: [ 64.778147] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Feb 23 19:29:07 nobilx kernel: [ 64.778168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 23 19:29:07 nobilx kernel: [ 64.778270] usb usb7: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 64.778294] hub 7-0:1.0: USB hub found Feb 23 19:29:07 nobilx kernel: [ 64.778309] hub 7-0:1.0: 2 ports detected Feb 23 19:29:07 nobilx kernel: [ 64.882212] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 21 Feb 23 19:29:07 nobilx kernel: [ 64.932340] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 23 19:29:07 nobilx kernel: [ 64.942020] usb 5-1: new full speed USB device using uhci_hcd and address 2 Feb 23 19:29:07 nobilx kernel: [ 65.124800] usb 5-1: configuration #1 chosen from 1 choice Feb 23 19:29:07 nobilx kernel: [ 65.130910] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 Feb 23 19:29:07 nobilx kernel: [ 65.150053] input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 23 19:29:07 nobilx kernel: [ 65.153710] Fixing up Logitech keyboard report descriptor Feb 23 19:29:07 nobilx kernel: [ 65.154259] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input3 Feb 23 19:29:07 nobilx kernel: [ 65.194082] input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 23 19:29:07 nobilx kernel: [ 66.210047] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 23 19:29:07 nobilx kernel: [ 66.944743] sda1 sda2 < sda5 sda6 > sda3 Feb 23 19:29:07 nobilx kernel: [ 66.968633] sd 4:0:0:0: [sda] Attached SCSI disk Feb 23 19:29:07 nobilx kernel: [ 66.971650] sd 4:0:0:0: Attached scsi generic sg0 type 0 Feb 23 19:29:07 nobilx kernel: [ 66.971665] sr 5:0:0:0: Attached scsi generic sg1 type 5 Feb 23 19:29:07 nobilx kernel: [ 66.978752] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 23 19:29:07 nobilx kernel: [ 66.978755] Uniform CD-ROM driver Revision: 3.20 Feb 23 19:29:07 nobilx kernel: [ 66.978790] sr 5:0:0:0: Attached scsi CD-ROM sr0 Feb 23 19:29:07 nobilx kernel: [ 67.138114] usb-storage: device scan complete Feb 23 19:29:07 nobilx kernel: [ 67.138607] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 23 19:29:07 nobilx kernel: [ 67.139109] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 23 19:29:07 nobilx kernel: [ 67.139609] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 23 19:29:07 nobilx kernel: [ 67.140349] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 23 19:29:07 nobilx kernel: [ 67.142013] sd 6:0:0:0: [sdb] Attached SCSI removable disk Feb 23 19:29:07 nobilx kernel: [ 67.142042] sd 6:0:0:0: Attached scsi generic sg2 type 0 Feb 23 19:29:07 nobilx kernel: [ 67.231412] Attempting manual resume Feb 23 19:29:07 nobilx kernel: [ 67.231415] swsusp: Resume From Partition 8:6 Feb 23 19:29:07 nobilx kernel: [ 67.231416] PM: Checking swsusp image. Feb 23 19:29:07 nobilx kernel: [ 67.231615] PM: Resume from disk failed. Feb 23 19:29:07 nobilx kernel: [ 67.271577] kjournald starting. Commit interval 5 seconds Feb 23 19:29:07 nobilx kernel: [ 67.271586] EXT3-fs: mounted filesystem with ordered data mode. Feb 23 19:29:07 nobilx kernel: [ 67.316102] sd 6:0:0:1: [sdc] 125184 512-byte hardware sectors (64 MB) Feb 23 19:29:07 nobilx kernel: [ 67.317099] sd 6:0:0:1: [sdc] Write Protect is off Feb 23 19:29:07 nobilx kernel: [ 67.317101] sd 6:0:0:1: [sdc] Mode Sense: 03 00 00 00 Feb 23 19:29:07 nobilx kernel: [ 67.317103] sd 6:0:0:1: [sdc] Assuming drive cache: write through Feb 23 19:29:07 nobilx kernel: [ 67.319100] sd 6:0:0:1: [sdc] 125184 512-byte hardware sectors (64 MB) Feb 23 19:29:07 nobilx kernel: [ 67.320098] sd 6:0:0:1: [sdc] Write Protect is off Feb 23 19:29:07 nobilx kernel: [ 67.320100] sd 6:0:0:1: [sdc] Mode Sense: 03 00 00 00 Feb 23 19:29:07 nobilx kernel: [ 67.320102] sd 6:0:0:1: [sdc] Assuming drive cache: write through Feb 23 19:29:07 nobilx kernel: [ 67.320105] sdc: unknown partition table Feb 23 19:29:07 nobilx kernel: [ 67.327391] sd 6:0:0:1: [sdc] Attached SCSI removable disk Feb 23 19:29:07 nobilx kernel: [ 67.327428] sd 6:0:0:1: Attached scsi generic sg3 type 0 Feb 23 19:29:07 nobilx kernel: [ 67.328380] sd 6:0:0:2: [sdd] Attached SCSI removable disk Feb 23 19:29:07 nobilx kernel: [ 67.328407] sd 6:0:0:2: Attached scsi generic sg4 type 0 Feb 23 19:29:07 nobilx kernel: [ 67.330383] sd 6:0:0:3: [sde] Attached SCSI removable disk Feb 23 19:29:07 nobilx kernel: [ 67.330412] sd 6:0:0:3: Attached scsi generic sg5 type 0 Feb 23 19:29:07 nobilx kernel: [ 75.601511] input: PC Speaker as /devices/platform/pcspkr/input/input4 Feb 23 19:29:07 nobilx kernel: [ 75.780722] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 23 19:29:07 nobilx kernel: [ 75.826274] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 23 19:29:07 nobilx kernel: [ 75.876127] input: Power Button (FF) as /devices/virtual/input/input5 Feb 23 19:29:07 nobilx kernel: [ 75.933434] ACPI: Power Button (FF) [PWRF] Feb 23 19:29:07 nobilx kernel: [ 75.933507] input: Power Button (CM) as /devices/virtual/input/input6 Feb 23 19:29:07 nobilx kernel: [ 75.981423] iTCO_vendor_support: vendor-support=0 Feb 23 19:29:07 nobilx kernel: [ 75.997408] ACPI: Power Button (CM) [PWRB] Feb 23 19:29:07 nobilx kernel: [ 76.005437] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 23 19:29:07 nobilx kernel: [ 76.005494] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 23 19:29:07 nobilx kernel: [ 76.005524] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 23 19:29:07 nobilx kernel: [ 76.149382] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 23 19:29:07 nobilx kernel: [ 76.149393] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 76.150195] sky2 0000:02:00.0: v1.20 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 23 19:29:07 nobilx kernel: [ 76.150510] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 23 19:29:07 nobilx kernel: [ 76.371554] nvidia: module license 'NVIDIA' taints kernel. Feb 23 19:29:07 nobilx kernel: [ 76.636514] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 23 19:29:07 nobilx kernel: [ 76.636522] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 76.636608] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 23 19:29:07 nobilx kernel: [ 76.857829] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 23 19:29:07 nobilx kernel: [ 76.858684] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 23 19:29:07 nobilx kernel: [ 77.035605] sky2 eth0: enabling interface Feb 23 19:29:07 nobilx kernel: [ 77.677884] NET: Registered protocol family 10 Feb 23 19:29:07 nobilx kernel: [ 77.678070] lo: Disabled Privacy Extensions Feb 23 19:29:07 nobilx kernel: [ 77.678322] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 23 19:29:07 nobilx kernel: [ 77.863453] lp: driver loaded but no devices found Feb 23 19:29:07 nobilx kernel: [ 78.011114] Adding 2875564k swap on /dev/sda6. Priority:-1 extents:1 across:2875564k Feb 23 19:29:07 nobilx kernel: [ 78.611191] EXT3 FS on sda3, internal journal Feb 23 19:29:07 nobilx kernel: [ 78.749851] device-mapper: uevent: version 1.0.3 Feb 23 19:29:07 nobilx kernel: [ 78.749874] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 23 19:29:07 nobilx kernel: [ 79.454284] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 23 19:29:07 nobilx kernel: [ 79.459111] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 23 19:29:07 nobilx kernel: [ 80.097796] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 23 19:29:07 nobilx kernel: [ 80.372941] No dock devices found. Feb 23 19:29:07 nobilx kernel: [ 80.504405] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 23 19:29:09 nobilx kernel: [ 83.202735] ppdev: user-space parallel port driver Feb 23 19:29:10 nobilx kernel: [ 84.319860] audit(1203791350.639:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5370 profile="/usr/sbin/cupsd" namespace="default" Feb 23 19:29:14 nobilx kernel: [ 88.267586] Bluetooth: Core ver 2.11 Feb 23 19:29:14 nobilx kernel: [ 88.267640] NET: Registered protocol family 31 Feb 23 19:29:14 nobilx kernel: [ 88.267642] Bluetooth: HCI device and connection manager initialized Feb 23 19:29:14 nobilx kernel: [ 88.267645] Bluetooth: HCI socket layer initialized Feb 23 19:29:14 nobilx kernel: [ 88.284983] Bluetooth: L2CAP ver 2.9 Feb 23 19:29:14 nobilx kernel: [ 88.284987] Bluetooth: L2CAP socket layer initialized Feb 23 19:29:14 nobilx kernel: [ 88.414157] Bluetooth: RFCOMM socket layer initialized Feb 23 19:29:14 nobilx kernel: [ 88.414171] Bluetooth: RFCOMM TTY layer initialized Feb 23 19:29:14 nobilx kernel: [ 88.414173] Bluetooth: RFCOMM ver 1.8 Feb 23 19:29:16 nobilx kernel: [ 90.312570] eth0: no IPv6 routers present Feb 23 19:31:23 nobilx kernel: [ 217.073370] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:32:27 nobilx kernel: [ 281.067362] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:37:05 nobilx kernel: [ 559.053862] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:38:11 nobilx kernel: [ 625.050102] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:39:51 nobilx kernel: [ 725.044403] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:39:55 nobilx kernel: [ 729.044175] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:40:31 nobilx kernel: [ 765.041888] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:42:17 nobilx kernel: [ 871.036083] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:43:13 nobilx kernel: [ 927.032892] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:43:21 nobilx kernel: [ 935.032436] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:45:29 nobilx kernel: [ 1063.101167] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:46:55 nobilx kernel: [ 1149.020241] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:51:39 nobilx kernel: [ 1433.004057] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:51:47 nobilx kernel: [ 1441.003602] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:52:53 nobilx kernel: [ 1507.099836] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:54:25 nobilx kernel: [ 1598.991218] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:54:33 nobilx kernel: [ 1607.098138] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:57:11 nobilx kernel: [ 1764.985139] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:57:13 nobilx kernel: [ 1767.161011] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 19:58:25 nobilx kernel: [ 1838.980918] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 20:01:49 nobilx kernel: [ 2043.073289] usb 1-3: reset high speed USB device using ehci_hcd and address 2 Feb 23 20:02:46 nobilx kernel: [ 2100.183853] ip6_tables: (C) 2000-2006 Netfilter Core Team Feb 24 00:53:15 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 00:53:15 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 00:53:15 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 00:53:15 nobilx kernel: Loaded 34748 symbols from 82 modules. Feb 24 00:53:15 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 24 00:53:15 nobilx kernel: [ 0.000000] Command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 24 00:53:15 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 24 00:53:15 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 24 00:53:15 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 00:53:15 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 24 00:53:15 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 24 00:53:15 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 24 00:53:15 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 24 00:53:15 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 24 00:53:15 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 24 00:53:15 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 24 00:53:15 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 24 00:53:15 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 24 00:53:15 nobilx kernel: [ 0.000000] Processor #1 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 24 00:53:15 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 24 00:53:15 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 24 00:53:15 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 24 00:53:15 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 24 00:53:15 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 24 00:53:15 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 24 00:53:15 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 24 00:53:15 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 00:53:15 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 24 00:53:15 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 24 00:53:15 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 24 00:53:15 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 24 00:53:15 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 24 00:53:15 nobilx kernel: [ 42.625369] time.c: Detected 2133.333 MHz processor. Feb 24 00:53:15 nobilx kernel: [ 42.626411] Console: colour VGA+ 80x25 Feb 24 00:53:15 nobilx kernel: [ 42.626413] console [tty0] enabled Feb 24 00:53:15 nobilx kernel: [ 42.626430] Checking aperture... Feb 24 00:53:15 nobilx kernel: [ 42.626437] Calgary: detecting Calgary via BIOS EBDA area Feb 24 00:53:15 nobilx kernel: [ 42.626438] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 24 00:53:15 nobilx kernel: [ 42.626440] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 24 00:53:15 nobilx kernel: [ 42.664955] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 24 00:53:15 nobilx kernel: [ 42.702656] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 24 00:53:15 nobilx kernel: [ 42.702685] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 24 00:53:15 nobilx kernel: [ 42.779358] Calibrating delay using timer specific routine.. 4269.67 BogoMIPS (lpj=8539342) Feb 24 00:53:15 nobilx kernel: [ 42.779388] Security Framework initialized Feb 24 00:53:15 nobilx kernel: [ 42.779393] SELinux: Disabled at boot. Feb 24 00:53:15 nobilx kernel: [ 42.779403] AppArmor: AppArmor initialized Feb 24 00:53:15 nobilx kernel: [ 42.779407] Failure registering capabilities with primary security module. Feb 24 00:53:15 nobilx kernel: [ 42.779801] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 24 00:53:15 nobilx kernel: [ 42.782404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 24 00:53:15 nobilx kernel: [ 42.783644] Mount-cache hash table entries: 256 Feb 24 00:53:15 nobilx kernel: [ 42.783774] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 00:53:15 nobilx kernel: [ 42.783776] CPU: L3 cache: 4096K Feb 24 00:53:15 nobilx kernel: [ 42.783778] CPU 0/0 -> Node 0 Feb 24 00:53:15 nobilx kernel: [ 42.783779] using mwait in idle threads. Feb 24 00:53:15 nobilx kernel: [ 42.783781] CPU: Physical Processor ID: 0 Feb 24 00:53:15 nobilx kernel: [ 42.783782] CPU: Processor Core ID: 0 Feb 24 00:53:15 nobilx kernel: [ 42.783788] CPU0: Thermal monitoring enabled (TM2) Feb 24 00:53:15 nobilx kernel: [ 42.783800] SMP alternatives: switching to UP code Feb 24 00:53:15 nobilx kernel: [ 42.784489] Early unpacking initramfs... done Feb 24 00:53:15 nobilx kernel: [ 43.114821] ACPI: Core revision 20070126 Feb 24 00:53:15 nobilx kernel: [ 43.114867] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 24 00:53:15 nobilx kernel: [ 43.189913] Using local APIC timer interrupts. Feb 24 00:53:15 nobilx kernel: [ 43.236793] APIC timer calibration result 16666661 Feb 24 00:53:15 nobilx kernel: [ 43.236794] Detected 16.666 MHz APIC timer. Feb 24 00:53:15 nobilx kernel: [ 43.236864] SMP alternatives: switching to SMP code Feb 24 00:53:15 nobilx kernel: [ 43.237464] Booting processor 1/2 APIC 0x1 Feb 24 00:53:15 nobilx kernel: [ 43.247859] Initializing CPU#1 Feb 24 00:53:15 nobilx kernel: [ 43.324797] Calibrating delay using timer specific routine.. 4266.69 BogoMIPS (lpj=8533386) Feb 24 00:53:15 nobilx kernel: [ 43.324803] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 00:53:15 nobilx kernel: [ 43.324805] CPU: L3 cache: 4096K Feb 24 00:53:15 nobilx kernel: [ 43.324806] CPU 1/1 -> Node 0 Feb 24 00:53:15 nobilx kernel: [ 43.324808] CPU: Physical Processor ID: 0 Feb 24 00:53:15 nobilx kernel: [ 43.324808] CPU: Processor Core ID: 0 Feb 24 00:53:15 nobilx kernel: [ 43.324814] CPU1: Thermal monitoring enabled (TM2) Feb 24 00:53:15 nobilx kernel: [ 43.325277] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 24 00:53:15 nobilx kernel: [ 43.325379] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 24 00:53:15 nobilx kernel: [ 43.348875] Brought up 2 CPUs Feb 24 00:53:15 nobilx kernel: [ 43.348941] CPU0 attaching sched-domain: Feb 24 00:53:15 nobilx kernel: [ 43.348943] domain 0: span 03 Feb 24 00:53:15 nobilx kernel: [ 43.348944] groups: 01 02 Feb 24 00:53:15 nobilx kernel: [ 43.348946] domain 1: span 03 Feb 24 00:53:15 nobilx kernel: [ 43.348948] groups: 03 Feb 24 00:53:15 nobilx kernel: [ 43.348949] CPU1 attaching sched-domain: Feb 24 00:53:15 nobilx kernel: [ 43.348950] domain 0: span 03 Feb 24 00:53:15 nobilx kernel: [ 43.348952] groups: 02 01 Feb 24 00:53:15 nobilx kernel: [ 43.348954] domain 1: span 03 Feb 24 00:53:15 nobilx kernel: [ 43.348955] groups: 03 Feb 24 00:53:15 nobilx kernel: [ 43.349139] net_namespace: 120 bytes Feb 24 00:53:15 nobilx kernel: [ 43.349467] Time: 23:52:50 Date: 02/23/08 Feb 24 00:53:15 nobilx kernel: [ 43.349509] NET: Registered protocol family 16 Feb 24 00:53:15 nobilx kernel: [ 43.349671] ACPI: bus type pci registered Feb 24 00:53:15 nobilx kernel: [ 43.349735] PCI: Using configuration type 1 Feb 24 00:53:15 nobilx kernel: [ 43.352613] ACPI: EC: Look up EC in DSDT Feb 24 00:53:15 nobilx kernel: [ 43.359428] ACPI: Interpreter enabled Feb 24 00:53:15 nobilx kernel: [ 43.359431] ACPI: (supports S0 S1 S3 S4 S5) Feb 24 00:53:15 nobilx kernel: [ 43.359444] ACPI: Using IOAPIC for interrupt routing Feb 24 00:53:15 nobilx kernel: [ 43.365239] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 24 00:53:15 nobilx kernel: [ 43.365819] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 24 00:53:15 nobilx kernel: [ 43.365822] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 24 00:53:15 nobilx kernel: [ 43.366523] PCI: Transparent bridge - 0000:00:1e.0 Feb 24 00:53:15 nobilx kernel: [ 43.366551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.366704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.366784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.366908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.366991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.367074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 24 00:53:15 nobilx kernel: [ 43.369563] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 24 00:53:15 nobilx kernel: [ 43.369675] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 24 00:53:15 nobilx kernel: [ 43.369785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 24 00:53:15 nobilx kernel: [ 43.369895] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 24 00:53:15 nobilx kernel: [ 43.370004] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 24 00:53:15 nobilx kernel: [ 43.370114] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 24 00:53:15 nobilx kernel: [ 43.370223] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 24 00:53:15 nobilx kernel: [ 43.370332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 24 00:53:15 nobilx kernel: [ 43.370442] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 24 00:53:15 nobilx kernel: [ 43.370448] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 24 00:53:15 nobilx kernel: [ 43.370472] pnp: PnP ACPI init Feb 24 00:53:15 nobilx kernel: [ 43.370479] ACPI: bus type pnp registered Feb 24 00:53:15 nobilx kernel: [ 43.372843] pnp: PnP ACPI: found 13 devices Feb 24 00:53:15 nobilx kernel: [ 43.372845] ACPI: ACPI bus type pnp unregistered Feb 24 00:53:15 nobilx kernel: [ 43.373051] PCI: Using ACPI for IRQ routing Feb 24 00:53:15 nobilx kernel: [ 43.373053] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 24 00:53:15 nobilx kernel: [ 43.388889] NET: Registered protocol family 8 Feb 24 00:53:15 nobilx kernel: [ 43.388891] NET: Registered protocol family 20 Feb 24 00:53:15 nobilx kernel: [ 43.388928] PCI-GART: No AMD northbridge found. Feb 24 00:53:15 nobilx kernel: [ 43.388932] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 24 00:53:15 nobilx kernel: [ 43.388936] hpet0: 3 64-bit timers, 14318180 Hz Feb 24 00:53:15 nobilx kernel: [ 43.389963] AppArmor: AppArmor Filesystem Enabled Feb 24 00:53:15 nobilx kernel: [ 43.389973] ACPI: RTC can wake from S4 Feb 24 00:53:15 nobilx kernel: [ 43.392889] Time: tsc clocksource has been installed. Feb 24 00:53:15 nobilx kernel: [ 43.392899] Switched to high resolution mode on CPU 0 Feb 24 00:53:15 nobilx kernel: [ 43.392962] Switched to high resolution mode on CPU 1 Feb 24 00:53:15 nobilx kernel: [ 43.400910] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400919] system 00:07: ioport range 0x290-0x297 has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400925] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400928] system 00:08: ioport range 0x800-0x87f has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400930] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400934] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400937] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400939] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400942] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400945] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400948] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400954] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400957] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400962] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400970] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400973] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 24 00:53:15 nobilx kernel: [ 43.400975] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400978] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.400981] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 24 00:53:15 nobilx kernel: [ 43.401385] PCI: Bridge: 0000:00:01.0 Feb 24 00:53:15 nobilx kernel: [ 43.401387] IO window: a000-afff Feb 24 00:53:15 nobilx kernel: [ 43.401389] MEM window: fa700000-fe7fffff Feb 24 00:53:15 nobilx kernel: [ 43.401391] PREFETCH window: bfe00000-dfdfffff Feb 24 00:53:15 nobilx kernel: [ 43.401394] PCI: Bridge: 0000:00:1c.0 Feb 24 00:53:15 nobilx kernel: [ 43.401395] IO window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401398] MEM window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401401] PREFETCH window: dfe00000-dfefffff Feb 24 00:53:15 nobilx kernel: [ 43.401405] PCI: Bridge: 0000:00:1c.4 Feb 24 00:53:15 nobilx kernel: [ 43.401407] IO window: c000-cfff Feb 24 00:53:15 nobilx kernel: [ 43.401410] MEM window: fe900000-fe9fffff Feb 24 00:53:15 nobilx kernel: [ 43.401413] PREFETCH window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401416] PCI: Bridge: 0000:00:1c.5 Feb 24 00:53:15 nobilx kernel: [ 43.401418] IO window: b000-bfff Feb 24 00:53:15 nobilx kernel: [ 43.401421] MEM window: fe800000-fe8fffff Feb 24 00:53:15 nobilx kernel: [ 43.401424] PREFETCH window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401427] PCI: Bridge: 0000:00:1e.0 Feb 24 00:53:15 nobilx kernel: [ 43.401428] IO window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401432] MEM window: fea00000-feafffff Feb 24 00:53:15 nobilx kernel: [ 43.401434] PREFETCH window: disabled. Feb 24 00:53:15 nobilx kernel: [ 43.401446] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 43.401450] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 43.401463] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 43.401467] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 43.401480] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 43.401484] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 00:53:15 nobilx kernel: [ 43.401498] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 00:53:15 nobilx kernel: [ 43.401501] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 00:53:15 nobilx kernel: [ 43.401509] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 43.401516] NET: Registered protocol family 2 Feb 24 00:53:15 nobilx kernel: [ 43.437043] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 24 00:53:15 nobilx kernel: [ 43.438107] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 24 00:53:15 nobilx kernel: [ 43.442004] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 24 00:53:15 nobilx kernel: [ 43.442598] TCP: Hash tables configured (established 524288 bind 65536) Feb 24 00:53:15 nobilx kernel: [ 43.442600] TCP reno registered Feb 24 00:53:15 nobilx kernel: [ 43.453046] checking if image is initramfs... it is Feb 24 00:53:15 nobilx kernel: [ 44.103981] Freeing initrd memory: 7831k freed Feb 24 00:53:15 nobilx kernel: [ 44.107245] audit: initializing netlink socket (disabled) Feb 24 00:53:15 nobilx kernel: [ 44.107257] audit(1203810771.392:1): initialized Feb 24 00:53:15 nobilx kernel: [ 44.109106] VFS: Disk quotas dquot_6.5.1 Feb 24 00:53:15 nobilx kernel: [ 44.109165] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 24 00:53:15 nobilx kernel: [ 44.109267] io scheduler noop registered Feb 24 00:53:15 nobilx kernel: [ 44.109269] io scheduler anticipatory registered Feb 24 00:53:15 nobilx kernel: [ 44.109270] io scheduler deadline registered Feb 24 00:53:15 nobilx kernel: [ 44.109361] io scheduler cfq registered (default) Feb 24 00:53:15 nobilx kernel: [ 44.386391] Boot video device is 0000:01:00.0 Feb 24 00:53:15 nobilx kernel: [ 44.386518] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 44.386544] assign_interrupt_mode Found MSI capability Feb 24 00:53:15 nobilx kernel: [ 44.386565] Allocate Port Service[0000:00:01.0:pcie00] Feb 24 00:53:15 nobilx kernel: [ 44.386627] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 44.386659] assign_interrupt_mode Found MSI capability Feb 24 00:53:15 nobilx kernel: [ 44.386685] Allocate Port Service[0000:00:1c.0:pcie00] Feb 24 00:53:15 nobilx kernel: [ 44.386711] Allocate Port Service[0000:00:1c.0:pcie02] Feb 24 00:53:15 nobilx kernel: [ 44.386775] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 00:53:15 nobilx kernel: [ 44.386807] assign_interrupt_mode Found MSI capability Feb 24 00:53:15 nobilx kernel: [ 44.386833] Allocate Port Service[0000:00:1c.4:pcie00] Feb 24 00:53:15 nobilx kernel: [ 44.386859] Allocate Port Service[0000:00:1c.4:pcie02] Feb 24 00:53:15 nobilx kernel: [ 44.386924] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 00:53:15 nobilx kernel: [ 44.386956] assign_interrupt_mode Found MSI capability Feb 24 00:53:15 nobilx kernel: [ 44.386981] Allocate Port Service[0000:00:1c.5:pcie00] Feb 24 00:53:15 nobilx kernel: [ 44.387008] Allocate Port Service[0000:00:1c.5:pcie02] Feb 24 00:53:15 nobilx kernel: [ 44.406951] Real Time Clock Driver v1.12ac Feb 24 00:53:15 nobilx kernel: [ 44.407093] hpet_resources: 0xfed00000 is busy Feb 24 00:53:15 nobilx kernel: [ 44.407128] Linux agpgart interface v0.102 Feb 24 00:53:15 nobilx kernel: [ 44.407130] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 24 00:53:15 nobilx kernel: [ 44.407234] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 00:53:15 nobilx kernel: [ 44.407649] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 00:53:15 nobilx kernel: [ 44.408228] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 24 00:53:15 nobilx kernel: [ 44.408280] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 24 00:53:15 nobilx kernel: [ 44.408387] PNP: No PS/2 controller found. Probing ports directly. Feb 24 00:53:15 nobilx kernel: [ 44.411070] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 24 00:53:15 nobilx kernel: [ 44.411073] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 24 00:53:15 nobilx kernel: [ 44.421021] mice: PS/2 mouse device common for all mice Feb 24 00:53:15 nobilx kernel: [ 44.421060] cpuidle: using governor ladder Feb 24 00:53:15 nobilx kernel: [ 44.421062] cpuidle: using governor menu Feb 24 00:53:15 nobilx kernel: [ 44.421186] NET: Registered protocol family 1 Feb 24 00:53:15 nobilx kernel: [ 44.421226] registered taskstats version 1 Feb 24 00:53:15 nobilx kernel: [ 44.421308] Magic number: 12:483:909 Feb 24 00:53:15 nobilx kernel: [ 44.421331] hash matches device ptyz5 Feb 24 00:53:15 nobilx kernel: [ 44.421362] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 24 00:53:15 nobilx kernel: [ 44.421368] Freeing unused kernel memory: 316k freed Feb 24 00:53:15 nobilx kernel: [ 45.574917] fuse init (API version 7.9) Feb 24 00:53:15 nobilx kernel: [ 45.582704] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 24 00:53:15 nobilx kernel: [ 45.583219] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 24 00:53:15 nobilx kernel: [ 45.583608] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 00:53:15 nobilx kernel: [ 45.583617] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 00:53:15 nobilx kernel: [ 45.772075] usbcore: registered new interface driver usbfs Feb 24 00:53:15 nobilx kernel: [ 45.772092] usbcore: registered new interface driver hub Feb 24 00:53:15 nobilx kernel: [ 45.772112] usbcore: registered new device driver usb Feb 24 00:53:15 nobilx kernel: [ 45.779403] USB Universal Host Controller Interface driver v3.0 Feb 24 00:53:15 nobilx kernel: [ 45.779444] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 45.779453] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 45.779456] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 45.779656] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 24 00:53:15 nobilx kernel: [ 45.779682] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 24 00:53:15 nobilx kernel: [ 45.779788] usb usb1: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 45.779806] hub 1-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 45.779811] hub 1-0:1.0: 2 ports detected Feb 24 00:53:15 nobilx kernel: [ 45.828630] SCSI subsystem initialized Feb 24 00:53:15 nobilx kernel: [ 45.834660] libata version 3.00 loaded. Feb 24 00:53:15 nobilx kernel: [ 45.880872] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 00:53:15 nobilx kernel: [ 45.880882] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 24 00:53:15 nobilx kernel: [ 45.880886] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 45.880911] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 Feb 24 00:53:15 nobilx kernel: [ 45.880937] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 24 00:53:15 nobilx kernel: [ 45.881021] usb usb2: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 45.881039] hub 2-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 45.881044] hub 2-0:1.0: 2 ports detected Feb 24 00:53:15 nobilx kernel: [ 45.984844] ahci 0000:00:1f.2: version 3.0 Feb 24 00:53:15 nobilx kernel: [ 45.984871] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 00:53:15 nobilx kernel: [ 46.224745] usb 2-1: new full speed USB device using uhci_hcd and address 2 Feb 24 00:53:15 nobilx kernel: [ 46.388055] usb 2-1: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 46.988767] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 24 00:53:15 nobilx kernel: [ 46.988771] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 24 00:53:15 nobilx kernel: [ 46.988775] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 24 00:53:15 nobilx kernel: [ 46.989200] scsi0 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989241] scsi1 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989271] scsi2 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989302] scsi3 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989333] scsi4 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989363] scsi5 : ahci Feb 24 00:53:15 nobilx kernel: [ 46.989449] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 Feb 24 00:53:15 nobilx kernel: [ 46.989452] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 Feb 24 00:53:15 nobilx kernel: [ 46.989454] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 Feb 24 00:53:15 nobilx kernel: [ 46.989456] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 Feb 24 00:53:15 nobilx kernel: [ 46.989458] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 Feb 24 00:53:15 nobilx kernel: [ 46.989460] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 Feb 24 00:53:15 nobilx kernel: [ 47.464668] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 47.471510] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-16, max UDMA/100 Feb 24 00:53:15 nobilx kernel: [ 47.471513] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 00:53:15 nobilx kernel: [ 47.478427] ata1.00: configured for UDMA/100 Feb 24 00:53:15 nobilx kernel: [ 47.952649] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 47.959648] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 Feb 24 00:53:15 nobilx kernel: [ 47.959652] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 00:53:15 nobilx kernel: [ 47.961605] ata2.00: configured for UDMA/133 Feb 24 00:53:15 nobilx kernel: [ 48.272628] ata3: SATA link down (SStatus 0 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 48.584610] ata4: SATA link down (SStatus 0 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 49.060606] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 49.063426] ata5.00: ATA-8: SAMSUNG HM12HII, CE100-09, max UDMA7 Feb 24 00:53:15 nobilx kernel: [ 49.063430] ata5.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 00:53:15 nobilx kernel: [ 49.064041] ata5.00: configured for UDMA/133 Feb 24 00:53:15 nobilx kernel: [ 49.536556] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 49.695596] ata6.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 24 00:53:15 nobilx kernel: [ 49.695600] ata6.00: applying bridge limits Feb 24 00:53:15 nobilx kernel: [ 49.851575] ata6.00: configured for UDMA/33 Feb 24 00:53:15 nobilx kernel: [ 49.851670] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5 Feb 24 00:53:15 nobilx kernel: [ 49.851784] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 Feb 24 00:53:15 nobilx kernel: [ 49.851899] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HM12HII CE10 PQ: 0 ANSI: 5 Feb 24 00:53:15 nobilx kernel: [ 49.852687] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 24 00:53:15 nobilx kernel: [ 49.852780] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 50.856504] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Feb 24 00:53:15 nobilx kernel: [ 50.856508] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Feb 24 00:53:15 nobilx kernel: [ 50.856514] PCI: Setting latency timer of device 0000:03:00.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 50.856615] scsi6 : ahci Feb 24 00:53:15 nobilx kernel: [ 50.856673] scsi7 : ahci Feb 24 00:53:15 nobilx kernel: [ 50.856740] ata7: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 Feb 24 00:53:15 nobilx kernel: [ 50.856743] ata8: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 Feb 24 00:53:15 nobilx kernel: [ 51.176475] ata7: SATA link down (SStatus 0 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 51.496455] ata8: SATA link down (SStatus 0 SControl 300) Feb 24 00:53:15 nobilx kernel: [ 51.496525] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 00:53:15 nobilx kernel: [ 51.496559] PCI: Setting latency timer of device 0000:03:00.1 to 64 Feb 24 00:53:15 nobilx kernel: [ 51.496613] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 00:53:15 nobilx kernel: [ 51.497524] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 24 00:53:15 nobilx kernel: [ 51.497530] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 51.497573] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 Feb 24 00:53:15 nobilx kernel: [ 51.501493] ehci_hcd 0000:00:1a.7: debug port 1 Feb 24 00:53:15 nobilx kernel: [ 51.501498] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 24 00:53:15 nobilx kernel: [ 51.501507] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 24 00:53:15 nobilx kernel: [ 51.505398] scsi8 : pata_jmicron Feb 24 00:53:15 nobilx kernel: [ 51.506363] Driver 'sd' needs updating - please use bus_type methods Feb 24 00:53:15 nobilx kernel: [ 51.506423] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 00:53:15 nobilx kernel: [ 51.506433] sd 0:0:0:0: [sda] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 51.506435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 51.506448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 51.506481] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 00:53:15 nobilx kernel: [ 51.506489] sd 0:0:0:0: [sda] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 51.506491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 51.506503] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 51.506506] sda:<6>scsi9 : pata_jmicron Feb 24 00:53:15 nobilx kernel: [ 51.507524] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 Feb 24 00:53:15 nobilx kernel: [ 51.507526] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 Feb 24 00:53:15 nobilx kernel: [ 51.511715] Driver 'sr' needs updating - please use bus_type methods Feb 24 00:53:15 nobilx kernel: [ 51.516962] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 00:53:15 nobilx kernel: [ 51.517064] usb usb3: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 51.517088] hub 3-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 51.517095] hub 3-0:1.0: 4 ports detected Feb 24 00:53:15 nobilx kernel: [ 51.544464] usb 2-1: USB disconnect, address 2 Feb 24 00:53:15 nobilx kernel: [ 51.669065] ata9.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100 Feb 24 00:53:15 nobilx kernel: [ 51.669068] ata9.00: 488397168 sectors, multi 0: LBA48 Feb 24 00:53:15 nobilx kernel: [ 51.709094] ata9.00: configured for UDMA/100 Feb 24 00:53:15 nobilx kernel: [ 51.875909] scsi 8:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 Feb 24 00:53:15 nobilx kernel: [ 51.877080] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 00:53:15 nobilx kernel: [ 51.877890] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 24 00:53:15 nobilx kernel: [ 51.877894] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 51.877929] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 Feb 24 00:53:15 nobilx kernel: [ 51.881846] ehci_hcd 0000:00:1d.7: debug port 1 Feb 24 00:53:15 nobilx kernel: [ 51.881851] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 24 00:53:15 nobilx kernel: [ 51.881859] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 24 00:53:15 nobilx kernel: [ 51.912428] usb 3-3: new high speed USB device using ehci_hcd and address 2 Feb 24 00:53:15 nobilx kernel: [ 51.924917] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 00:53:15 nobilx kernel: [ 51.925015] usb usb4: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 51.925039] hub 4-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 51.925045] hub 4-0:1.0: 6 ports detected Feb 24 00:53:15 nobilx kernel: [ 52.028547] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 Feb 24 00:53:15 nobilx kernel: [ 52.029015] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 00:53:15 nobilx kernel: [ 52.029022] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 52.029025] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 52.029043] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 Feb 24 00:53:15 nobilx kernel: [ 52.029063] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 24 00:53:15 nobilx kernel: [ 52.029141] usb usb5: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 52.029158] hub 5-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 52.029162] hub 5-0:1.0: 2 ports detected Feb 24 00:53:15 nobilx kernel: [ 52.072899] sda1 sda2 sda3 sda4 Feb 24 00:53:15 nobilx kernel: [ 52.072975] sd 0:0:0:0: [sda] Attached SCSI disk Feb 24 00:53:15 nobilx kernel: [ 52.075166] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 00:53:15 nobilx kernel: [ 52.075177] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 52.075179] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 52.075192] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 52.075234] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 00:53:15 nobilx kernel: [ 52.075242] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 52.075243] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 52.075256] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 52.075259] sdb:<6>usb 3-3: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 52.078701] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 24 00:53:15 nobilx kernel: [ 52.104053] sdb1 sdb2 sdb3 Feb 24 00:53:15 nobilx kernel: [ 52.104134] sd 1:0:0:0: [sdb] Attached SCSI disk Feb 24 00:53:15 nobilx kernel: [ 52.104188] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB) Feb 24 00:53:15 nobilx kernel: [ 52.104200] sd 4:0:0:0: [sdc] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 52.104202] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 52.104220] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 52.104260] sd 4:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB) Feb 24 00:53:15 nobilx kernel: [ 52.104280] sd 4:0:0:0: [sdc] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 52.104282] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 52.104295] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 52.104298] sdc:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 00:53:15 nobilx kernel: [ 52.132492] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 24 00:53:15 nobilx kernel: [ 52.132495] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 52.132516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 Feb 24 00:53:15 nobilx kernel: [ 52.132541] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 24 00:53:15 nobilx kernel: [ 52.132655] usb usb6: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 52.132673] hub 6-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 52.132677] hub 6-0:1.0: 2 ports detected Feb 24 00:53:15 nobilx kernel: [ 52.236964] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 00:53:15 nobilx kernel: [ 52.236971] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 24 00:53:15 nobilx kernel: [ 52.236975] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 24 00:53:15 nobilx kernel: [ 52.236994] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 Feb 24 00:53:15 nobilx kernel: [ 52.237015] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 24 00:53:15 nobilx kernel: [ 52.237119] usb usb7: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 52.237151] hub 7-0:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 52.237156] hub 7-0:1.0: 2 ports detected Feb 24 00:53:15 nobilx kernel: [ 52.556884] usb 4-2: new high speed USB device using ehci_hcd and address 3 Feb 24 00:53:15 nobilx kernel: [ 52.688741] usb 4-2: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 52.688799] hub 4-2:1.0: USB hub found Feb 24 00:53:15 nobilx kernel: [ 52.688904] hub 4-2:1.0: 4 ports detected Feb 24 00:53:15 nobilx kernel: [ 53.032375] usb 5-1: new full speed USB device using uhci_hcd and address 2 Feb 24 00:53:15 nobilx kernel: [ 53.215166] usb 5-1: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 53.344397] usbcore: registered new interface driver libusual Feb 24 00:53:15 nobilx kernel: [ 53.347081] Initializing USB Mass Storage driver... Feb 24 00:53:15 nobilx kernel: [ 53.347139] scsi10 : SCSI emulation for USB Mass Storage devices Feb 24 00:53:15 nobilx kernel: [ 53.347192] usb-storage: device found at 2 Feb 24 00:53:15 nobilx kernel: [ 53.347194] usb-storage: waiting for device to settle before scanning Feb 24 00:53:15 nobilx kernel: [ 53.348422] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 24 00:53:15 nobilx kernel: [ 53.560408] usb 4-2.3: new low speed USB device using ehci_hcd and address 4 Feb 24 00:53:15 nobilx kernel: [ 53.657736] usb 4-2.3: configuration #1 chosen from 1 choice Feb 24 00:53:15 nobilx kernel: [ 53.658298] usbcore: registered new interface driver hiddev Feb 24 00:53:15 nobilx kernel: [ 53.658312] usbcore: registered new interface driver usb-storage Feb 24 00:53:15 nobilx kernel: [ 53.658315] USB Mass Storage support registered. Feb 24 00:53:15 nobilx kernel: [ 53.661287] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input1 Feb 24 00:53:15 nobilx kernel: [ 53.692846] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 00:53:15 nobilx kernel: [ 53.696092] Fixing up Logitech keyboard report descriptor Feb 24 00:53:15 nobilx kernel: [ 53.696696] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input2 Feb 24 00:53:15 nobilx kernel: [ 53.728369] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 00:53:15 nobilx kernel: [ 53.731236] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb4/4-2/4-2.3/4-2.3:1.0/input/input3 Feb 24 00:53:15 nobilx kernel: [ 53.748341] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 24 00:53:15 nobilx kernel: [ 53.748353] usbcore: registered new interface driver usbhid Feb 24 00:53:15 nobilx kernel: [ 53.748356] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 24 00:53:15 nobilx kernel: [ 54.628953] sdc1 sdc2 < sdc5 sdc6 > sdc3 Feb 24 00:53:15 nobilx kernel: [ 54.652834] sd 4:0:0:0: [sdc] Attached SCSI disk Feb 24 00:53:15 nobilx kernel: [ 54.652897] sd 8:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) Feb 24 00:53:15 nobilx kernel: [ 54.652910] sd 8:0:0:0: [sdd] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 54.652913] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 54.652931] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 54.652979] sd 8:0:0:0: [sdd] 488397168 512-byte hardware sectors (250059 MB) Feb 24 00:53:15 nobilx kernel: [ 54.652987] sd 8:0:0:0: [sdd] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 54.652989] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Feb 24 00:53:15 nobilx kernel: [ 54.653003] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 00:53:15 nobilx kernel: [ 54.653006] sdd:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 24 00:53:15 nobilx kernel: [ 54.661620] Uniform CD-ROM driver Revision: 3.20 Feb 24 00:53:15 nobilx kernel: [ 54.661657] sr 5:0:0:0: Attached scsi CD-ROM sr0 Feb 24 00:53:15 nobilx kernel: [ 54.662930] Feb 24 00:53:15 nobilx kernel: [ 54.662962] sd 8:0:0:0: [sdd] Attached SCSI disk Feb 24 00:53:15 nobilx kernel: [ 54.668606] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 24 00:53:15 nobilx kernel: [ 54.668622] sd 1:0:0:0: Attached scsi generic sg1 type 0 Feb 24 00:53:15 nobilx kernel: [ 54.668637] sd 4:0:0:0: Attached scsi generic sg2 type 0 Feb 24 00:53:15 nobilx kernel: [ 54.668655] sr 5:0:0:0: Attached scsi generic sg3 type 5 Feb 24 00:53:15 nobilx kernel: [ 54.668672] sd 8:0:0:0: Attached scsi generic sg4 type 0 Feb 24 00:53:15 nobilx kernel: [ 55.004637] Attempting manual resume Feb 24 00:53:15 nobilx kernel: [ 55.004640] swsusp: Resume From Partition 8:38 Feb 24 00:53:15 nobilx kernel: [ 55.004641] PM: Checking swsusp image. Feb 24 00:53:15 nobilx kernel: [ 55.004891] PM: Resume from disk failed. Feb 24 00:53:15 nobilx kernel: [ 55.048037] kjournald starting. Commit interval 5 seconds Feb 24 00:53:15 nobilx kernel: [ 55.048046] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 00:53:15 nobilx kernel: [ 58.344201] usb-storage: device scan complete Feb 24 00:53:15 nobilx kernel: [ 58.344692] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 24 00:53:15 nobilx kernel: [ 58.345193] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 24 00:53:15 nobilx kernel: [ 58.345693] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 24 00:53:15 nobilx kernel: [ 58.346192] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 24 00:53:15 nobilx kernel: [ 58.347467] sd 10:0:0:0: [sde] Attached SCSI removable disk Feb 24 00:53:15 nobilx kernel: [ 58.347498] sd 10:0:0:0: Attached scsi generic sg5 type 0 Feb 24 00:53:15 nobilx kernel: [ 58.521559] sd 10:0:0:1: [sdf] 125184 512-byte hardware sectors (64 MB) Feb 24 00:53:15 nobilx kernel: [ 58.522557] sd 10:0:0:1: [sdf] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 58.522559] sd 10:0:0:1: [sdf] Mode Sense: 03 00 00 00 Feb 24 00:53:15 nobilx kernel: [ 58.522561] sd 10:0:0:1: [sdf] Assuming drive cache: write through Feb 24 00:53:15 nobilx kernel: [ 58.524684] sd 10:0:0:1: [sdf] 125184 512-byte hardware sectors (64 MB) Feb 24 00:53:15 nobilx kernel: [ 58.525683] sd 10:0:0:1: [sdf] Write Protect is off Feb 24 00:53:15 nobilx kernel: [ 58.525685] sd 10:0:0:1: [sdf] Mode Sense: 03 00 00 00 Feb 24 00:53:15 nobilx kernel: [ 58.525687] sd 10:0:0:1: [sdf] Assuming drive cache: write through Feb 24 00:53:15 nobilx kernel: [ 58.525690] sdf: unknown partition table Feb 24 00:53:15 nobilx kernel: [ 58.532970] sd 10:0:0:1: [sdf] Attached SCSI removable disk Feb 24 00:53:15 nobilx kernel: [ 58.532999] sd 10:0:0:1: Attached scsi generic sg6 type 0 Feb 24 00:53:15 nobilx kernel: [ 58.533961] sd 10:0:0:2: [sdg] Attached SCSI removable disk Feb 24 00:53:15 nobilx kernel: [ 58.533989] sd 10:0:0:2: Attached scsi generic sg7 type 0 Feb 24 00:53:15 nobilx kernel: [ 58.534962] sd 10:0:0:3: [sdh] Attached SCSI removable disk Feb 24 00:53:15 nobilx kernel: [ 58.534989] sd 10:0:0:3: Attached scsi generic sg8 type 0 Feb 24 00:53:15 nobilx kernel: [ 61.512477] input: PC Speaker as /devices/platform/pcspkr/input/input4 Feb 24 00:53:15 nobilx kernel: [ 61.544375] iTCO_vendor_support: vendor-support=0 Feb 24 00:53:15 nobilx kernel: [ 61.583199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 24 00:53:15 nobilx kernel: [ 61.583264] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 24 00:53:15 nobilx kernel: [ 61.583294] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 24 00:53:15 nobilx kernel: [ 61.704408] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 24 00:53:15 nobilx kernel: [ 61.724394] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 24 00:53:15 nobilx kernel: [ 61.753263] input: Power Button (FF) as /devices/virtual/input/input5 Feb 24 00:53:15 nobilx kernel: [ 61.800363] ACPI: Power Button (FF) [PWRF] Feb 24 00:53:15 nobilx kernel: [ 61.800437] input: Power Button (CM) as /devices/virtual/input/input6 Feb 24 00:53:15 nobilx kernel: [ 61.860354] ACPI: Power Button (CM) [PWRB] Feb 24 00:53:15 nobilx kernel: [ 62.303144] nvidia: module license 'NVIDIA' taints kernel. Feb 24 00:53:15 nobilx kernel: [ 62.701519] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 00:53:15 nobilx kernel: [ 62.701527] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 62.701605] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 24 00:53:15 nobilx kernel: [ 62.704247] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 24 00:53:15 nobilx kernel: [ 62.704258] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 62.705056] sky2 0000:02:00.0: v1.20 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 24 00:53:15 nobilx kernel: [ 62.705384] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 24 00:53:15 nobilx kernel: [ 63.008885] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 24 00:53:15 nobilx kernel: [ 63.009725] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 24 00:53:15 nobilx kernel: [ 63.103937] sky2 eth0: enabling interface Feb 24 00:53:15 nobilx kernel: [ 63.695916] NET: Registered protocol family 10 Feb 24 00:53:15 nobilx kernel: [ 63.696081] lo: Disabled Privacy Extensions Feb 24 00:53:15 nobilx kernel: [ 63.696343] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 24 00:53:15 nobilx kernel: [ 64.507206] lp: driver loaded but no devices found Feb 24 00:53:15 nobilx kernel: [ 65.333392] EXT3 FS on sda4, internal journal Feb 24 00:53:15 nobilx kernel: [ 65.466476] device-mapper: uevent: version 1.0.3 Feb 24 00:53:15 nobilx kernel: [ 65.466500] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 24 00:53:15 nobilx kernel: [ 65.558064] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 24 00:53:15 nobilx kernel: [ 65.562891] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 24 00:53:15 nobilx kernel: [ 66.707382] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 24 00:53:15 nobilx kernel: [ 66.970080] No dock devices found. Feb 24 00:53:15 nobilx kernel: [ 67.067901] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 00:53:17 nobilx kernel: [ 70.012399] ppdev: user-space parallel port driver Feb 24 00:53:18 nobilx kernel: [ 71.294124] audit(1203810798.900:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5658 profile="/usr/sbin/cupsd" namespace="default" Feb 24 00:53:23 nobilx kernel: [ 75.575046] eth0: no IPv6 routers present Feb 24 00:53:25 nobilx kernel: [ 77.993281] Bluetooth: Core ver 2.11 Feb 24 00:53:25 nobilx kernel: [ 77.993335] NET: Registered protocol family 31 Feb 24 00:53:25 nobilx kernel: [ 77.993337] Bluetooth: HCI device and connection manager initialized Feb 24 00:53:25 nobilx kernel: [ 77.993341] Bluetooth: HCI socket layer initialized Feb 24 00:53:25 nobilx kernel: [ 78.049450] Bluetooth: L2CAP ver 2.9 Feb 24 00:53:25 nobilx kernel: [ 78.049454] Bluetooth: L2CAP socket layer initialized Feb 24 00:53:25 nobilx kernel: [ 78.311252] Bluetooth: RFCOMM socket layer initialized Feb 24 00:53:25 nobilx kernel: [ 78.311264] Bluetooth: RFCOMM TTY layer initialized Feb 24 00:53:25 nobilx kernel: [ 78.311266] Bluetooth: RFCOMM ver 1.8 Feb 24 00:55:39 nobilx kernel: [ 211.643300] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 00:56:03 nobilx kernel: [ 235.641931] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 00:58:07 nobilx kernel: [ 359.632022] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:06:37 nobilx kernel: [ 869.613802] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:08:07 nobilx kernel: [ 959.640675] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:09:25 nobilx kernel: [ 1037.648229] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:11:37 nobilx kernel: [ 1169.604706] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:12:25 nobilx kernel: [ 1217.689965] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:15:49 nobilx kernel: [ 1421.690373] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:21:41 nobilx kernel: [ 1773.625135] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:24:07 nobilx kernel: [ 1920.226499] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:24:22 nobilx kernel: [ 1934.417679] ip6_tables: (C) 2000-2006 Netfilter Core Team Feb 24 01:24:22 nobilx kernel: Kernel logging (proc) stopped. Feb 24 01:24:22 nobilx kernel: Kernel log daemon terminating. Feb 24 01:24:40 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 01:24:41 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 01:24:41 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 01:24:41 nobilx kernel: Loaded 35773 symbols from 88 modules. Feb 24 01:24:41 nobilx kernel: [ 1953.157792] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 01:24:41 nobilx kernel: [ 1953.904774] audit(1203812681.618:3): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=17068 profile="/usr/sbin/cupsd" namespace="default" Feb 24 01:26:27 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 01:26:27 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 01:26:27 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 01:26:27 nobilx kernel: Loaded 34748 symbols from 82 modules. Feb 24 01:26:27 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 24 01:26:27 nobilx kernel: [ 0.000000] Command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 24 01:26:27 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 24 01:26:27 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 24 01:26:27 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 01:26:27 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 24 01:26:27 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 24 01:26:27 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 24 01:26:27 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 24 01:26:27 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 24 01:26:27 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 24 01:26:27 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 24 01:26:27 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 24 01:26:27 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 24 01:26:27 nobilx kernel: [ 0.000000] Processor #1 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 24 01:26:27 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 24 01:26:27 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 24 01:26:27 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 24 01:26:27 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 24 01:26:27 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 24 01:26:27 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 24 01:26:27 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 24 01:26:27 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 01:26:27 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 24 01:26:27 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 24 01:26:27 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 24 01:26:27 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 24 01:26:27 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 24 01:26:27 nobilx kernel: [ 35.111880] time.c: Detected 2133.333 MHz processor. Feb 24 01:26:27 nobilx kernel: [ 35.112923] Console: colour VGA+ 80x25 Feb 24 01:26:27 nobilx kernel: [ 35.112925] console [tty0] enabled Feb 24 01:26:27 nobilx kernel: [ 35.112942] Checking aperture... Feb 24 01:26:27 nobilx kernel: [ 35.112949] Calgary: detecting Calgary via BIOS EBDA area Feb 24 01:26:27 nobilx kernel: [ 35.112951] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 24 01:26:27 nobilx kernel: [ 35.112952] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 24 01:26:27 nobilx kernel: [ 35.152122] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 24 01:26:27 nobilx kernel: [ 35.189797] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 24 01:26:27 nobilx kernel: [ 35.189827] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 24 01:26:27 nobilx kernel: [ 35.265869] Calibrating delay using timer specific routine.. 4269.69 BogoMIPS (lpj=8539391) Feb 24 01:26:27 nobilx kernel: [ 35.265899] Security Framework initialized Feb 24 01:26:27 nobilx kernel: [ 35.265904] SELinux: Disabled at boot. Feb 24 01:26:27 nobilx kernel: [ 35.265914] AppArmor: AppArmor initialized Feb 24 01:26:27 nobilx kernel: [ 35.265917] Failure registering capabilities with primary security module. Feb 24 01:26:27 nobilx kernel: [ 35.266312] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 24 01:26:27 nobilx kernel: [ 35.268908] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 24 01:26:27 nobilx kernel: [ 35.270145] Mount-cache hash table entries: 256 Feb 24 01:26:27 nobilx kernel: [ 35.270274] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 01:26:27 nobilx kernel: [ 35.270276] CPU: L3 cache: 4096K Feb 24 01:26:27 nobilx kernel: [ 35.270278] CPU 0/0 -> Node 0 Feb 24 01:26:27 nobilx kernel: [ 35.270279] using mwait in idle threads. Feb 24 01:26:27 nobilx kernel: [ 35.270281] CPU: Physical Processor ID: 0 Feb 24 01:26:27 nobilx kernel: [ 35.270282] CPU: Processor Core ID: 0 Feb 24 01:26:27 nobilx kernel: [ 35.270288] CPU0: Thermal monitoring enabled (TM2) Feb 24 01:26:27 nobilx kernel: [ 35.270300] SMP alternatives: switching to UP code Feb 24 01:26:27 nobilx kernel: [ 35.270990] Early unpacking initramfs... done Feb 24 01:26:27 nobilx kernel: [ 35.600702] ACPI: Core revision 20070126 Feb 24 01:26:27 nobilx kernel: [ 35.600749] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 24 01:26:27 nobilx kernel: [ 35.696305] Using local APIC timer interrupts. Feb 24 01:26:27 nobilx kernel: [ 35.743185] APIC timer calibration result 16666654 Feb 24 01:26:27 nobilx kernel: [ 35.743186] Detected 16.666 MHz APIC timer. Feb 24 01:26:27 nobilx kernel: [ 35.743254] SMP alternatives: switching to SMP code Feb 24 01:26:27 nobilx kernel: [ 35.743854] Booting processor 1/2 APIC 0x1 Feb 24 01:26:27 nobilx kernel: [ 35.754249] Initializing CPU#1 Feb 24 01:26:27 nobilx kernel: [ 35.831189] Calibrating delay using timer specific routine.. 4266.69 BogoMIPS (lpj=8533380) Feb 24 01:26:27 nobilx kernel: [ 35.831195] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 01:26:27 nobilx kernel: [ 35.831197] CPU: L3 cache: 4096K Feb 24 01:26:27 nobilx kernel: [ 35.831198] CPU 1/1 -> Node 0 Feb 24 01:26:27 nobilx kernel: [ 35.831200] CPU: Physical Processor ID: 0 Feb 24 01:26:27 nobilx kernel: [ 35.831201] CPU: Processor Core ID: 0 Feb 24 01:26:27 nobilx kernel: [ 35.831206] CPU1: Thermal monitoring enabled (TM2) Feb 24 01:26:27 nobilx kernel: [ 35.831670] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 24 01:26:27 nobilx kernel: [ 35.831769] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 24 01:26:27 nobilx kernel: [ 35.851789] Brought up 2 CPUs Feb 24 01:26:27 nobilx kernel: [ 35.851856] CPU0 attaching sched-domain: Feb 24 01:26:27 nobilx kernel: [ 35.851858] domain 0: span 03 Feb 24 01:26:27 nobilx kernel: [ 35.851859] groups: 01 02 Feb 24 01:26:27 nobilx kernel: [ 35.851861] domain 1: span 03 Feb 24 01:26:27 nobilx kernel: [ 35.851862] groups: 03 Feb 24 01:26:27 nobilx kernel: [ 35.851864] CPU1 attaching sched-domain: Feb 24 01:26:27 nobilx kernel: [ 35.851865] domain 0: span 03 Feb 24 01:26:27 nobilx kernel: [ 35.851867] groups: 02 01 Feb 24 01:26:27 nobilx kernel: [ 35.851869] domain 1: span 03 Feb 24 01:26:27 nobilx kernel: [ 35.851870] groups: 03 Feb 24 01:26:27 nobilx kernel: [ 35.852054] net_namespace: 120 bytes Feb 24 01:26:27 nobilx kernel: [ 35.852382] Time: 0:26:02 Date: 02/24/08 Feb 24 01:26:27 nobilx kernel: [ 35.852424] NET: Registered protocol family 16 Feb 24 01:26:27 nobilx kernel: [ 35.852585] ACPI: bus type pci registered Feb 24 01:26:27 nobilx kernel: [ 35.852648] PCI: Using configuration type 1 Feb 24 01:26:27 nobilx kernel: [ 35.855534] ACPI: EC: Look up EC in DSDT Feb 24 01:26:27 nobilx kernel: [ 35.862343] ACPI: Interpreter enabled Feb 24 01:26:27 nobilx kernel: [ 35.862345] ACPI: (supports S0 S1 S3 S4 S5) Feb 24 01:26:27 nobilx kernel: [ 35.862359] ACPI: Using IOAPIC for interrupt routing Feb 24 01:26:27 nobilx kernel: [ 35.868143] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 24 01:26:27 nobilx kernel: [ 35.868725] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 24 01:26:27 nobilx kernel: [ 35.868728] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 24 01:26:27 nobilx kernel: [ 35.869430] PCI: Transparent bridge - 0000:00:1e.0 Feb 24 01:26:27 nobilx kernel: [ 35.869458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.869611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.869692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.869816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.869899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.869983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 24 01:26:27 nobilx kernel: [ 35.872474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 24 01:26:27 nobilx kernel: [ 35.872587] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 24 01:26:27 nobilx kernel: [ 35.872696] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 24 01:26:27 nobilx kernel: [ 35.872806] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 24 01:26:27 nobilx kernel: [ 35.872915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 24 01:26:27 nobilx kernel: [ 35.873026] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 24 01:26:27 nobilx kernel: [ 35.873135] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 24 01:26:27 nobilx kernel: [ 35.873244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 24 01:26:27 nobilx kernel: [ 35.873356] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 24 01:26:27 nobilx kernel: [ 35.873361] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 24 01:26:27 nobilx kernel: [ 35.873386] pnp: PnP ACPI init Feb 24 01:26:27 nobilx kernel: [ 35.873393] ACPI: bus type pnp registered Feb 24 01:26:27 nobilx kernel: [ 35.875766] pnp: PnP ACPI: found 13 devices Feb 24 01:26:27 nobilx kernel: [ 35.875768] ACPI: ACPI bus type pnp unregistered Feb 24 01:26:27 nobilx kernel: [ 35.875963] PCI: Using ACPI for IRQ routing Feb 24 01:26:27 nobilx kernel: [ 35.875965] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 24 01:26:27 nobilx kernel: [ 35.891345] NET: Registered protocol family 8 Feb 24 01:26:27 nobilx kernel: [ 35.891347] NET: Registered protocol family 20 Feb 24 01:26:27 nobilx kernel: [ 35.891383] PCI-GART: No AMD northbridge found. Feb 24 01:26:27 nobilx kernel: [ 35.891388] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 24 01:26:27 nobilx kernel: [ 35.891392] hpet0: 3 64-bit timers, 14318180 Hz Feb 24 01:26:27 nobilx kernel: [ 35.892419] AppArmor: AppArmor Filesystem Enabled Feb 24 01:26:27 nobilx kernel: [ 35.892429] ACPI: RTC can wake from S4 Feb 24 01:26:27 nobilx kernel: [ 35.895342] Time: tsc clocksource has been installed. Feb 24 01:26:27 nobilx kernel: [ 35.895351] Switched to high resolution mode on CPU 0 Feb 24 01:26:27 nobilx kernel: [ 35.895957] Switched to high resolution mode on CPU 1 Feb 24 01:26:27 nobilx kernel: [ 35.903364] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903372] system 00:07: ioport range 0x290-0x297 has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903378] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903381] system 00:08: ioport range 0x800-0x87f has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903384] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903387] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903390] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903393] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903395] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903398] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903401] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903407] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903410] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903415] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903423] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903426] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 24 01:26:27 nobilx kernel: [ 35.903429] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903431] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903434] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 24 01:26:27 nobilx kernel: [ 35.903837] PCI: Bridge: 0000:00:01.0 Feb 24 01:26:27 nobilx kernel: [ 35.903839] IO window: a000-afff Feb 24 01:26:27 nobilx kernel: [ 35.903842] MEM window: fa700000-fe7fffff Feb 24 01:26:27 nobilx kernel: [ 35.903844] PREFETCH window: bfe00000-dfdfffff Feb 24 01:26:27 nobilx kernel: [ 35.903846] PCI: Bridge: 0000:00:1c.0 Feb 24 01:26:27 nobilx kernel: [ 35.903847] IO window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903850] MEM window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903853] PREFETCH window: dfe00000-dfefffff Feb 24 01:26:27 nobilx kernel: [ 35.903857] PCI: Bridge: 0000:00:1c.4 Feb 24 01:26:27 nobilx kernel: [ 35.903859] IO window: c000-cfff Feb 24 01:26:27 nobilx kernel: [ 35.903862] MEM window: fe900000-fe9fffff Feb 24 01:26:27 nobilx kernel: [ 35.903865] PREFETCH window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903868] PCI: Bridge: 0000:00:1c.5 Feb 24 01:26:27 nobilx kernel: [ 35.903870] IO window: b000-bfff Feb 24 01:26:27 nobilx kernel: [ 35.903874] MEM window: fe800000-fe8fffff Feb 24 01:26:27 nobilx kernel: [ 35.903876] PREFETCH window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903880] PCI: Bridge: 0000:00:1e.0 Feb 24 01:26:27 nobilx kernel: [ 35.903881] IO window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903884] MEM window: fea00000-feafffff Feb 24 01:26:27 nobilx kernel: [ 35.903887] PREFETCH window: disabled. Feb 24 01:26:27 nobilx kernel: [ 35.903898] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 35.903902] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 35.903915] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 35.903919] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 35.903932] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 35.903936] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 01:26:27 nobilx kernel: [ 35.903950] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:26:27 nobilx kernel: [ 35.903954] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 01:26:27 nobilx kernel: [ 35.903962] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 35.903969] NET: Registered protocol family 2 Feb 24 01:26:27 nobilx kernel: [ 35.939496] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 24 01:26:27 nobilx kernel: [ 35.940562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 24 01:26:27 nobilx kernel: [ 35.944461] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 24 01:26:27 nobilx kernel: [ 35.945056] TCP: Hash tables configured (established 524288 bind 65536) Feb 24 01:26:27 nobilx kernel: [ 35.945058] TCP reno registered Feb 24 01:26:27 nobilx kernel: [ 35.955499] checking if image is initramfs... it is Feb 24 01:26:27 nobilx kernel: [ 36.605848] Freeing initrd memory: 7831k freed Feb 24 01:26:27 nobilx kernel: [ 36.609112] audit: initializing netlink socket (disabled) Feb 24 01:26:27 nobilx kernel: [ 36.609124] audit(1203812762.392:1): initialized Feb 24 01:26:27 nobilx kernel: [ 36.610961] VFS: Disk quotas dquot_6.5.1 Feb 24 01:26:27 nobilx kernel: [ 36.611020] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 24 01:26:27 nobilx kernel: [ 36.611123] io scheduler noop registered Feb 24 01:26:27 nobilx kernel: [ 36.611124] io scheduler anticipatory registered Feb 24 01:26:27 nobilx kernel: [ 36.611126] io scheduler deadline registered Feb 24 01:26:27 nobilx kernel: [ 36.611216] io scheduler cfq registered (default) Feb 24 01:26:27 nobilx kernel: [ 36.707809] Boot video device is 0000:01:00.0 Feb 24 01:26:27 nobilx kernel: [ 36.707933] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 36.707960] assign_interrupt_mode Found MSI capability Feb 24 01:26:27 nobilx kernel: [ 36.707981] Allocate Port Service[0000:00:01.0:pcie00] Feb 24 01:26:27 nobilx kernel: [ 36.708043] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 36.708075] assign_interrupt_mode Found MSI capability Feb 24 01:26:27 nobilx kernel: [ 36.708101] Allocate Port Service[0000:00:1c.0:pcie00] Feb 24 01:26:27 nobilx kernel: [ 36.708127] Allocate Port Service[0000:00:1c.0:pcie02] Feb 24 01:26:27 nobilx kernel: [ 36.708192] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 01:26:27 nobilx kernel: [ 36.708224] assign_interrupt_mode Found MSI capability Feb 24 01:26:27 nobilx kernel: [ 36.708250] Allocate Port Service[0000:00:1c.4:pcie00] Feb 24 01:26:27 nobilx kernel: [ 36.708276] Allocate Port Service[0000:00:1c.4:pcie02] Feb 24 01:26:27 nobilx kernel: [ 36.708341] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 01:26:27 nobilx kernel: [ 36.708373] assign_interrupt_mode Found MSI capability Feb 24 01:26:27 nobilx kernel: [ 36.708399] Allocate Port Service[0000:00:1c.5:pcie00] Feb 24 01:26:27 nobilx kernel: [ 36.708426] Allocate Port Service[0000:00:1c.5:pcie02] Feb 24 01:26:27 nobilx kernel: [ 36.728354] Real Time Clock Driver v1.12ac Feb 24 01:26:27 nobilx kernel: [ 36.728496] hpet_resources: 0xfed00000 is busy Feb 24 01:26:27 nobilx kernel: [ 36.728530] Linux agpgart interface v0.102 Feb 24 01:26:27 nobilx kernel: [ 36.728532] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 24 01:26:27 nobilx kernel: [ 36.728636] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 01:26:27 nobilx kernel: [ 36.729053] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 01:26:27 nobilx kernel: [ 36.729632] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 24 01:26:27 nobilx kernel: [ 36.729685] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 24 01:26:27 nobilx kernel: [ 36.729792] PNP: No PS/2 controller found. Probing ports directly. Feb 24 01:26:27 nobilx kernel: [ 36.732476] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 24 01:26:27 nobilx kernel: [ 36.732480] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 24 01:26:27 nobilx kernel: [ 36.743448] mice: PS/2 mouse device common for all mice Feb 24 01:26:27 nobilx kernel: [ 36.743486] cpuidle: using governor ladder Feb 24 01:26:27 nobilx kernel: [ 36.743488] cpuidle: using governor menu Feb 24 01:26:27 nobilx kernel: [ 36.743619] NET: Registered protocol family 1 Feb 24 01:26:27 nobilx kernel: [ 36.743658] registered taskstats version 1 Feb 24 01:26:27 nobilx kernel: [ 36.743740] Magic number: 12:149:406 Feb 24 01:26:27 nobilx kernel: [ 36.743794] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 24 01:26:27 nobilx kernel: [ 36.743801] Freeing unused kernel memory: 316k freed Feb 24 01:26:27 nobilx kernel: [ 37.897242] fuse init (API version 7.9) Feb 24 01:26:27 nobilx kernel: [ 37.905003] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 24 01:26:27 nobilx kernel: [ 37.905524] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 24 01:26:27 nobilx kernel: [ 37.905907] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 01:26:27 nobilx kernel: [ 37.905917] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 01:26:27 nobilx kernel: [ 38.000681] usbcore: registered new interface driver usbfs Feb 24 01:26:27 nobilx kernel: [ 38.000699] usbcore: registered new interface driver hub Feb 24 01:26:27 nobilx kernel: [ 38.001179] usbcore: registered new device driver usb Feb 24 01:26:27 nobilx kernel: [ 38.001994] USB Universal Host Controller Interface driver v3.0 Feb 24 01:26:27 nobilx kernel: [ 38.002030] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 38.002038] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.002041] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.002227] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 24 01:26:27 nobilx kernel: [ 38.002251] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 24 01:26:27 nobilx kernel: [ 38.002350] usb usb1: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.002368] hub 1-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.002373] hub 1-0:1.0: 2 ports detected Feb 24 01:26:27 nobilx kernel: [ 38.103308] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:26:27 nobilx kernel: [ 38.103318] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.103321] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.103339] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 Feb 24 01:26:27 nobilx kernel: [ 38.103365] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 24 01:26:27 nobilx kernel: [ 38.103450] usb usb2: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.103467] hub 2-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.103472] hub 2-0:1.0: 2 ports detected Feb 24 01:26:27 nobilx kernel: [ 38.130068] SCSI subsystem initialized Feb 24 01:26:27 nobilx kernel: [ 38.153411] libata version 3.00 loaded. Feb 24 01:26:27 nobilx kernel: [ 38.207325] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:26:27 nobilx kernel: [ 38.207356] PCI: Setting latency timer of device 0000:03:00.1 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.211161] scsi0 : pata_jmicron Feb 24 01:26:27 nobilx kernel: [ 38.211479] scsi1 : pata_jmicron Feb 24 01:26:27 nobilx kernel: [ 38.212044] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 Feb 24 01:26:27 nobilx kernel: [ 38.212046] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 Feb 24 01:26:27 nobilx kernel: [ 38.376327] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100 Feb 24 01:26:27 nobilx kernel: [ 38.376330] ata1.00: 488397168 sectors, multi 0: LBA48 Feb 24 01:26:27 nobilx kernel: [ 38.408330] ata1.00: configured for UDMA/100 Feb 24 01:26:27 nobilx kernel: [ 38.447194] usb 2-1: new full speed USB device using uhci_hcd and address 2 Feb 24 01:26:27 nobilx kernel: [ 38.575247] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 Feb 24 01:26:27 nobilx kernel: [ 38.575320] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 01:26:27 nobilx kernel: [ 38.575331] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.575334] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.575356] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 Feb 24 01:26:27 nobilx kernel: [ 38.575380] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 24 01:26:27 nobilx kernel: [ 38.575469] usb usb3: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.575487] hub 3-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.575492] hub 3-0:1.0: 2 ports detected Feb 24 01:26:27 nobilx kernel: [ 38.610467] usb 2-1: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.679265] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 01:26:27 nobilx kernel: [ 38.679274] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.679277] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.679298] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 Feb 24 01:26:27 nobilx kernel: [ 38.679326] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 24 01:26:27 nobilx kernel: [ 38.679450] usb usb4: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.679467] hub 4-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.679472] hub 4-0:1.0: 2 ports detected Feb 24 01:26:27 nobilx kernel: [ 38.783252] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 01:26:27 nobilx kernel: [ 38.783259] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.783262] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.783283] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 Feb 24 01:26:27 nobilx kernel: [ 38.783306] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 24 01:26:27 nobilx kernel: [ 38.783406] usb usb5: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.783439] hub 5-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.783444] hub 5-0:1.0: 2 ports detected Feb 24 01:26:27 nobilx kernel: [ 38.887540] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 01:26:27 nobilx kernel: [ 38.888503] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 24 01:26:27 nobilx kernel: [ 38.888508] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 38.888542] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 Feb 24 01:26:27 nobilx kernel: [ 38.892447] ehci_hcd 0000:00:1a.7: debug port 1 Feb 24 01:26:27 nobilx kernel: [ 38.892452] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 24 01:26:27 nobilx kernel: [ 38.892457] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 24 01:26:27 nobilx kernel: [ 38.919171] usb 3-1: new full speed USB device using uhci_hcd and address 2 Feb 24 01:26:27 nobilx kernel: [ 38.931184] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 01:26:27 nobilx kernel: [ 38.931295] usb usb6: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 38.931321] hub 6-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 38.931328] hub 6-0:1.0: 4 ports detected Feb 24 01:26:27 nobilx kernel: [ 39.035251] ahci 0000:00:1f.2: version 3.0 Feb 24 01:26:27 nobilx kernel: [ 39.035274] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 01:26:27 nobilx kernel: [ 39.113499] usb 3-1: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 39.355160] usb 3-2: new full speed USB device using uhci_hcd and address 3 Feb 24 01:26:27 nobilx kernel: [ 39.494410] usb 3-2: not running at top speed; connect to a high speed hub Feb 24 01:26:27 nobilx kernel: [ 39.502491] usb 3-2: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 39.505432] hub 3-2:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 39.507411] hub 3-2:1.0: 4 ports detected Feb 24 01:26:27 nobilx kernel: [ 39.855136] usb 6-3: new high speed USB device using ehci_hcd and address 2 Feb 24 01:26:27 nobilx kernel: [ 39.989581] usb 6-3: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 39.989827] usb 2-1: USB disconnect, address 2 Feb 24 01:26:27 nobilx kernel: [ 39.989965] usbcore: registered new interface driver libusual Feb 24 01:26:27 nobilx kernel: [ 39.990042] usbcore: registered new interface driver hiddev Feb 24 01:26:27 nobilx kernel: [ 39.992777] Initializing USB Mass Storage driver... Feb 24 01:26:27 nobilx kernel: [ 40.039186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 24 01:26:27 nobilx kernel: [ 40.039190] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 24 01:26:27 nobilx kernel: [ 40.039195] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 24 01:26:27 nobilx kernel: [ 40.039447] scsi2 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.039599] scsi3 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.039739] scsi4 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.039878] scsi5 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.040021] scsi6 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.040169] scsi7 : ahci Feb 24 01:26:27 nobilx kernel: [ 40.040255] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.040258] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.040261] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.040263] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.040265] ata7: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.040267] ata8: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 Feb 24 01:26:27 nobilx kernel: [ 40.117678] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input1 Feb 24 01:26:27 nobilx kernel: [ 40.127160] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:26:27 nobilx kernel: [ 40.129410] Fixing up Logitech keyboard report descriptor Feb 24 01:26:27 nobilx kernel: [ 40.130009] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input2 Feb 24 01:26:27 nobilx kernel: [ 40.159172] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:26:27 nobilx kernel: [ 40.336412] usb 3-2.3: new low speed USB device using uhci_hcd and address 4 Feb 24 01:26:27 nobilx kernel: [ 40.491491] usb 3-2.3: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 40.497464] scsi8 : SCSI emulation for USB Mass Storage devices Feb 24 01:26:27 nobilx kernel: [ 40.497636] usb-storage: device found at 2 Feb 24 01:26:27 nobilx kernel: [ 40.497637] usb-storage: waiting for device to settle before scanning Feb 24 01:26:27 nobilx kernel: [ 40.510624] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3 Feb 24 01:26:27 nobilx kernel: [ 40.515628] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 40.522471] ata3.00: ATA-7: SAMSUNG HM160JI, AD100-16, max UDMA/100 Feb 24 01:26:27 nobilx kernel: [ 40.522475] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 01:26:27 nobilx kernel: [ 40.527132] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2.3 Feb 24 01:26:27 nobilx kernel: [ 40.527146] usbcore: registered new interface driver usbhid Feb 24 01:26:27 nobilx kernel: [ 40.527149] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 24 01:26:27 nobilx kernel: [ 40.527612] usbcore: registered new interface driver usb-storage Feb 24 01:26:27 nobilx kernel: [ 40.527615] USB Mass Storage support registered. Feb 24 01:26:27 nobilx kernel: [ 40.529384] ata3.00: configured for UDMA/100 Feb 24 01:26:27 nobilx kernel: [ 41.003091] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 41.023597] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 Feb 24 01:26:27 nobilx kernel: [ 41.023601] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 01:26:27 nobilx kernel: [ 41.025561] ata4.00: configured for UDMA/133 Feb 24 01:26:27 nobilx kernel: [ 41.335049] ata5: SATA link down (SStatus 0 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 41.647051] ata6: SATA link down (SStatus 0 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 42.123048] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 42.125896] ata7.00: ATA-8: SAMSUNG HM12HII, CE100-09, max UDMA7 Feb 24 01:26:27 nobilx kernel: [ 42.125900] ata7.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 01:26:27 nobilx kernel: [ 42.126508] ata7.00: configured for UDMA/133 Feb 24 01:26:27 nobilx kernel: [ 42.598978] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 42.758035] ata8.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 24 01:26:27 nobilx kernel: [ 42.758039] ata8.00: applying bridge limits Feb 24 01:26:27 nobilx kernel: [ 42.914015] ata8.00: configured for UDMA/33 Feb 24 01:26:27 nobilx kernel: [ 42.914115] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5 Feb 24 01:26:27 nobilx kernel: [ 42.914227] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 Feb 24 01:26:27 nobilx kernel: [ 42.914335] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HM12HII CE10 PQ: 0 ANSI: 5 Feb 24 01:26:27 nobilx kernel: [ 42.915132] scsi 7:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 24 01:26:27 nobilx kernel: [ 42.915216] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 43.918925] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Feb 24 01:26:27 nobilx kernel: [ 43.918930] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Feb 24 01:26:27 nobilx kernel: [ 43.918936] PCI: Setting latency timer of device 0000:03:00.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 43.920148] scsi9 : ahci Feb 24 01:26:27 nobilx kernel: [ 43.920350] scsi10 : ahci Feb 24 01:26:27 nobilx kernel: [ 43.920399] ata9: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 Feb 24 01:26:27 nobilx kernel: [ 43.920403] ata10: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 Feb 24 01:26:27 nobilx kernel: [ 44.238895] ata9: SATA link down (SStatus 0 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 44.558876] ata10: SATA link down (SStatus 0 SControl 300) Feb 24 01:26:27 nobilx kernel: [ 44.558953] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 Feb 24 01:26:27 nobilx kernel: [ 44.609068] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 24 01:26:27 nobilx kernel: [ 44.610257] Driver 'sd' needs updating - please use bus_type methods Feb 24 01:26:27 nobilx kernel: [ 44.610322] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Feb 24 01:26:27 nobilx kernel: [ 44.610331] sd 0:0:0:0: [sda] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 44.610333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 44.610347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 44.610383] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Feb 24 01:26:27 nobilx kernel: [ 44.610391] sd 0:0:0:0: [sda] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 44.610393] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 44.610406] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 44.610408] sda:<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 01:26:27 nobilx kernel: [ 44.613565] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 24 01:26:27 nobilx kernel: [ 44.613570] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 24 01:26:27 nobilx kernel: [ 44.613610] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 Feb 24 01:26:27 nobilx kernel: [ 44.616335] Feb 24 01:26:27 nobilx kernel: [ 44.616369] sd 0:0:0:0: [sda] Attached SCSI disk Feb 24 01:26:27 nobilx kernel: [ 44.616419] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) Feb 24 01:26:27 nobilx kernel: [ 44.616428] sd 2:0:0:0: [sdb] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 44.616430] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 44.616444] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 44.616479] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) Feb 24 01:26:27 nobilx kernel: [ 44.616487] sd 2:0:0:0: [sdb] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 44.616489] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 44.616502] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 44.616504] sdb:<6>ehci_hcd 0000:00:1d.7: debug port 1 Feb 24 01:26:27 nobilx kernel: [ 44.617532] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 24 01:26:27 nobilx kernel: [ 44.617537] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 24 01:26:27 nobilx kernel: [ 44.623009] Driver 'sr' needs updating - please use bus_type methods Feb 24 01:26:27 nobilx kernel: [ 44.634890] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 01:26:27 nobilx kernel: [ 44.635025] usb usb7: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 44.635050] hub 7-0:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 44.635057] hub 7-0:1.0: 6 ports detected Feb 24 01:26:27 nobilx kernel: [ 45.214851] usb 7-2: new high speed USB device using ehci_hcd and address 3 Feb 24 01:26:27 nobilx kernel: [ 45.214942] sdb1 sdb2 sdb3 sdb4 Feb 24 01:26:27 nobilx kernel: [ 45.215063] sd 2:0:0:0: [sdb] Attached SCSI disk Feb 24 01:26:27 nobilx kernel: [ 45.215112] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Feb 24 01:26:27 nobilx kernel: [ 45.215122] sd 3:0:0:0: [sdc] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 45.215123] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 45.215137] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 45.215171] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Feb 24 01:26:27 nobilx kernel: [ 45.215179] sd 3:0:0:0: [sdc] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 45.215180] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 45.215193] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 45.215196] sdc: sdc1 sdc2 sdc3 Feb 24 01:26:27 nobilx kernel: [ 45.259626] sd 3:0:0:0: [sdc] Attached SCSI disk Feb 24 01:26:27 nobilx kernel: [ 45.259675] sd 6:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB) Feb 24 01:26:27 nobilx kernel: [ 45.259687] sd 6:0:0:0: [sdd] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 45.259689] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 45.259706] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 45.259744] sd 6:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB) Feb 24 01:26:27 nobilx kernel: [ 45.259755] sd 6:0:0:0: [sdd] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 45.259757] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Feb 24 01:26:27 nobilx kernel: [ 45.259774] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:26:27 nobilx kernel: [ 45.259788] sdd:<6>usb 7-2: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 45.347357] hub 7-2:1.0: USB hub found Feb 24 01:26:27 nobilx kernel: [ 45.347460] hub 7-2:1.0: 4 ports detected Feb 24 01:26:27 nobilx kernel: [ 45.450891] usb 3-1: USB disconnect, address 2 Feb 24 01:26:27 nobilx kernel: [ 45.495524] usb-storage: device scan complete Feb 24 01:26:27 nobilx kernel: [ 45.496021] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 24 01:26:27 nobilx kernel: [ 45.496520] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 24 01:26:27 nobilx kernel: [ 45.497020] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 24 01:26:27 nobilx kernel: [ 45.497519] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 24 01:26:27 nobilx kernel: [ 45.742801] usb 3-1: new full speed USB device using uhci_hcd and address 5 Feb 24 01:26:27 nobilx kernel: [ 45.882933] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 24 01:26:27 nobilx kernel: [ 45.925492] usb 3-1: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 45.931611] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input4 Feb 24 01:26:27 nobilx kernel: [ 45.950840] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:26:27 nobilx kernel: [ 45.954409] Fixing up Logitech keyboard report descriptor Feb 24 01:26:27 nobilx kernel: [ 45.954963] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input5 Feb 24 01:26:27 nobilx kernel: [ 45.998841] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:26:27 nobilx kernel: [ 45.998906] usb 3-2: USB disconnect, address 3 Feb 24 01:26:27 nobilx kernel: [ 45.998908] usb 3-2.3: USB disconnect, address 4 Feb 24 01:26:27 nobilx kernel: [ 46.362840] usb 7-2.3: new low speed USB device using ehci_hcd and address 4 Feb 24 01:26:27 nobilx kernel: [ 46.476290] usb 7-2.3: configuration #1 chosen from 1 choice Feb 24 01:26:27 nobilx kernel: [ 46.480136] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.3/7-2.3:1.0/input/input6 Feb 24 01:26:27 nobilx kernel: [ 46.502792] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 24 01:26:27 nobilx kernel: [ 47.845587] sdd1 sdd2 < sdd5 sdd6 > sdd3 Feb 24 01:26:27 nobilx kernel: [ 47.869474] sd 6:0:0:0: [sdd] Attached SCSI disk Feb 24 01:26:27 nobilx kernel: [ 47.870411] sd 8:0:0:0: [sde] Attached SCSI removable disk Feb 24 01:26:27 nobilx kernel: [ 47.877972] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 24 01:26:27 nobilx kernel: [ 47.877975] Uniform CD-ROM driver Revision: 3.20 Feb 24 01:26:27 nobilx kernel: [ 47.878016] sr 7:0:0:0: Attached scsi CD-ROM sr0 Feb 24 01:26:27 nobilx kernel: [ 48.044511] sd 8:0:0:1: [sdf] 125184 512-byte hardware sectors (64 MB) Feb 24 01:26:27 nobilx kernel: [ 48.045508] sd 8:0:0:1: [sdf] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 48.045511] sd 8:0:0:1: [sdf] Mode Sense: 03 00 00 00 Feb 24 01:26:27 nobilx kernel: [ 48.045513] sd 8:0:0:1: [sdf] Assuming drive cache: write through Feb 24 01:26:27 nobilx kernel: [ 48.047632] sd 8:0:0:1: [sdf] 125184 512-byte hardware sectors (64 MB) Feb 24 01:26:27 nobilx kernel: [ 48.048633] sd 8:0:0:1: [sdf] Write Protect is off Feb 24 01:26:27 nobilx kernel: [ 48.048635] sd 8:0:0:1: [sdf] Mode Sense: 03 00 00 00 Feb 24 01:26:27 nobilx kernel: [ 48.048637] sd 8:0:0:1: [sdf] Assuming drive cache: write through Feb 24 01:26:27 nobilx kernel: [ 48.048640] sdf: unknown partition table Feb 24 01:26:27 nobilx kernel: [ 48.055925] sd 8:0:0:1: [sdf] Attached SCSI removable disk Feb 24 01:26:27 nobilx kernel: [ 48.056788] sd 8:0:0:2: [sdg] Attached SCSI removable disk Feb 24 01:26:27 nobilx kernel: [ 48.057660] sd 8:0:0:3: [sdh] Attached SCSI removable disk Feb 24 01:26:27 nobilx kernel: [ 48.068790] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068808] sd 2:0:0:0: Attached scsi generic sg1 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068822] sd 3:0:0:0: Attached scsi generic sg2 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068839] sd 6:0:0:0: Attached scsi generic sg3 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068855] sr 7:0:0:0: Attached scsi generic sg4 type 5 Feb 24 01:26:27 nobilx kernel: [ 48.068870] sd 8:0:0:0: Attached scsi generic sg5 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068887] sd 8:0:0:1: Attached scsi generic sg6 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068901] sd 8:0:0:2: Attached scsi generic sg7 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.068915] sd 8:0:0:3: Attached scsi generic sg8 type 0 Feb 24 01:26:27 nobilx kernel: [ 48.378231] Attempting manual resume Feb 24 01:26:27 nobilx kernel: [ 48.378234] swsusp: Resume From Partition 8:54 Feb 24 01:26:27 nobilx kernel: [ 48.378235] PM: Checking swsusp image. Feb 24 01:26:27 nobilx kernel: [ 48.378423] PM: Resume from disk failed. Feb 24 01:26:27 nobilx kernel: [ 48.412915] kjournald starting. Commit interval 5 seconds Feb 24 01:26:27 nobilx kernel: [ 48.412926] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 01:26:27 nobilx kernel: [ 55.242589] input: PC Speaker as /devices/platform/pcspkr/input/input7 Feb 24 01:26:27 nobilx kernel: [ 55.324575] iTCO_vendor_support: vendor-support=0 Feb 24 01:26:27 nobilx kernel: [ 55.350289] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 24 01:26:27 nobilx kernel: [ 55.350353] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 24 01:26:27 nobilx kernel: [ 55.350385] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 24 01:26:27 nobilx kernel: [ 55.426374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 24 01:26:27 nobilx kernel: [ 55.460818] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 24 01:26:27 nobilx kernel: [ 55.490827] input: Power Button (FF) as /devices/virtual/input/input8 Feb 24 01:26:27 nobilx kernel: [ 55.538756] ACPI: Power Button (FF) [PWRF] Feb 24 01:26:27 nobilx kernel: [ 55.538840] input: Power Button (CM) as /devices/virtual/input/input9 Feb 24 01:26:27 nobilx kernel: [ 55.602755] ACPI: Power Button (CM) [PWRB] Feb 24 01:26:27 nobilx kernel: [ 55.894772] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:26:27 nobilx kernel: [ 55.894783] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 55.895596] sky2 0000:02:00.0: v1.20 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 24 01:26:27 nobilx kernel: [ 55.895944] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 24 01:26:27 nobilx kernel: [ 56.103512] nvidia: module license 'NVIDIA' taints kernel. Feb 24 01:26:27 nobilx kernel: [ 56.473435] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:26:27 nobilx kernel: [ 56.473442] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 56.473517] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 24 01:26:27 nobilx kernel: [ 56.496802] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 24 01:26:27 nobilx kernel: [ 56.497633] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 24 01:26:27 nobilx kernel: [ 56.832696] sky2 eth0: enabling interface Feb 24 01:26:27 nobilx kernel: [ 57.405775] lp: driver loaded but no devices found Feb 24 01:26:27 nobilx kernel: [ 57.691221] NET: Registered protocol family 10 Feb 24 01:26:27 nobilx kernel: [ 57.691394] lo: Disabled Privacy Extensions Feb 24 01:26:27 nobilx kernel: [ 57.691642] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 24 01:26:27 nobilx kernel: [ 58.331461] EXT3 FS on sdb4, internal journal Feb 24 01:26:27 nobilx kernel: [ 58.452880] device-mapper: uevent: version 1.0.3 Feb 24 01:26:27 nobilx kernel: [ 58.452904] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 24 01:26:27 nobilx kernel: [ 59.213423] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 24 01:26:27 nobilx kernel: [ 59.218256] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 24 01:26:27 nobilx kernel: [ 59.838851] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 24 01:26:27 nobilx kernel: [ 60.134584] No dock devices found. Feb 24 01:26:27 nobilx kernel: [ 60.246263] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 01:26:29 nobilx kernel: [ 63.210514] ppdev: user-space parallel port driver Feb 24 01:26:31 nobilx kernel: [ 64.314488] audit(1203812791.035:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5892 profile="/usr/sbin/cupsd" namespace="default" Feb 24 01:26:36 nobilx kernel: [ 69.309429] eth0: no IPv6 routers present Feb 24 01:26:39 nobilx kernel: [ 72.436061] Bluetooth: Core ver 2.11 Feb 24 01:26:39 nobilx kernel: [ 72.436116] NET: Registered protocol family 31 Feb 24 01:26:39 nobilx kernel: [ 72.436118] Bluetooth: HCI device and connection manager initialized Feb 24 01:26:39 nobilx kernel: [ 72.436122] Bluetooth: HCI socket layer initialized Feb 24 01:26:39 nobilx kernel: [ 72.513703] Bluetooth: L2CAP ver 2.9 Feb 24 01:26:39 nobilx kernel: [ 72.513706] Bluetooth: L2CAP socket layer initialized Feb 24 01:26:39 nobilx kernel: [ 72.742585] Bluetooth: RFCOMM socket layer initialized Feb 24 01:26:39 nobilx kernel: [ 72.742598] Bluetooth: RFCOMM TTY layer initialized Feb 24 01:26:39 nobilx kernel: [ 72.742600] Bluetooth: RFCOMM ver 1.8 Feb 24 01:28:32 nobilx kernel: [ 185.719351] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:30:40 nobilx kernel: [ 313.707508] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:39:52 nobilx kernel: [ 865.657062] kjournald starting. Commit interval 5 seconds Feb 24 01:39:52 nobilx kernel: [ 865.657287] EXT3 FS on sdb2, internal journal Feb 24 01:39:52 nobilx kernel: [ 865.657293] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 01:41:35 nobilx kernel: [ 968.817167] kjournald starting. Commit interval 5 seconds Feb 24 01:41:35 nobilx kernel: [ 968.817516] EXT3 FS on sdb2, internal journal Feb 24 01:41:35 nobilx kernel: [ 968.817521] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 01:44:57 nobilx kernel: [ 1170.428686] Xorg[6998] general protection rip:7f2c13f27b5b rsp:7fff1d9c15b0 error:0 Feb 24 01:45:33 nobilx kernel: [ 1207.200346] ata7: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen Feb 24 01:45:33 nobilx kernel: [ 1207.200351] ata7: irq_stat 0x00400000, PHY RDY changed Feb 24 01:45:33 nobilx kernel: [ 1207.200354] ata7: SError: { PHYRdyChg } Feb 24 01:45:36 nobilx kernel: [ 1209.416464] ata7: soft resetting link Feb 24 01:45:36 nobilx kernel: [ 1209.416473] ata7: SATA link down (SStatus 11 SControl 300) Feb 24 01:45:36 nobilx kernel: [ 1209.416479] ata7: failed to recover some devices, retrying in 5 secs Feb 24 01:46:44 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 01:46:45 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 01:46:45 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 01:46:45 nobilx kernel: Loaded 34748 symbols from 82 modules. Feb 24 01:46:45 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 24 01:46:45 nobilx kernel: [ 0.000000] Command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 24 01:46:45 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 24 01:46:45 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 24 01:46:45 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 01:46:45 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 24 01:46:45 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 24 01:46:45 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 24 01:46:45 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 24 01:46:45 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 24 01:46:45 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 24 01:46:45 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 24 01:46:45 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 24 01:46:45 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 24 01:46:45 nobilx kernel: [ 0.000000] Processor #1 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 24 01:46:45 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 24 01:46:45 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 24 01:46:45 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 24 01:46:45 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 24 01:46:45 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 24 01:46:45 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 24 01:46:45 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 24 01:46:45 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 01:46:45 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 24 01:46:45 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 24 01:46:45 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 24 01:46:45 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 24 01:46:45 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 24 01:46:45 nobilx kernel: [ 30.035887] time.c: Detected 2133.332 MHz processor. Feb 24 01:46:45 nobilx kernel: [ 30.036930] Console: colour VGA+ 80x25 Feb 24 01:46:45 nobilx kernel: [ 30.036932] console [tty0] enabled Feb 24 01:46:45 nobilx kernel: [ 30.036949] Checking aperture... Feb 24 01:46:45 nobilx kernel: [ 30.036956] Calgary: detecting Calgary via BIOS EBDA area Feb 24 01:46:45 nobilx kernel: [ 30.036957] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 24 01:46:45 nobilx kernel: [ 30.036959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 24 01:46:45 nobilx kernel: [ 30.075469] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 24 01:46:45 nobilx kernel: [ 30.113822] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 24 01:46:45 nobilx kernel: [ 30.113852] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 24 01:46:45 nobilx kernel: [ 30.189877] Calibrating delay using timer specific routine.. 4269.67 BogoMIPS (lpj=8539342) Feb 24 01:46:45 nobilx kernel: [ 30.189907] Security Framework initialized Feb 24 01:46:45 nobilx kernel: [ 30.189913] SELinux: Disabled at boot. Feb 24 01:46:45 nobilx kernel: [ 30.189923] AppArmor: AppArmor initialized Feb 24 01:46:45 nobilx kernel: [ 30.189926] Failure registering capabilities with primary security module. Feb 24 01:46:45 nobilx kernel: [ 30.190319] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 24 01:46:45 nobilx kernel: [ 30.192914] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 24 01:46:45 nobilx kernel: [ 30.194152] Mount-cache hash table entries: 256 Feb 24 01:46:45 nobilx kernel: [ 30.194283] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 01:46:45 nobilx kernel: [ 30.194286] CPU: L3 cache: 4096K Feb 24 01:46:45 nobilx kernel: [ 30.194287] CPU 0/0 -> Node 0 Feb 24 01:46:45 nobilx kernel: [ 30.194289] using mwait in idle threads. Feb 24 01:46:45 nobilx kernel: [ 30.194290] CPU: Physical Processor ID: 0 Feb 24 01:46:45 nobilx kernel: [ 30.194291] CPU: Processor Core ID: 0 Feb 24 01:46:45 nobilx kernel: [ 30.194297] CPU0: Thermal monitoring enabled (TM2) Feb 24 01:46:45 nobilx kernel: [ 30.194309] SMP alternatives: switching to UP code Feb 24 01:46:45 nobilx kernel: [ 30.194991] Early unpacking initramfs... done Feb 24 01:46:45 nobilx kernel: [ 30.524687] ACPI: Core revision 20070126 Feb 24 01:46:45 nobilx kernel: [ 30.524733] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 24 01:46:45 nobilx kernel: [ 30.599762] Using local APIC timer interrupts. Feb 24 01:46:45 nobilx kernel: [ 30.646642] APIC timer calibration result 16666656 Feb 24 01:46:45 nobilx kernel: [ 30.646643] Detected 16.666 MHz APIC timer. Feb 24 01:46:45 nobilx kernel: [ 30.646710] SMP alternatives: switching to SMP code Feb 24 01:46:45 nobilx kernel: [ 30.647311] Booting processor 1/2 APIC 0x1 Feb 24 01:46:45 nobilx kernel: [ 30.657706] Initializing CPU#1 Feb 24 01:46:45 nobilx kernel: [ 30.734646] Calibrating delay using timer specific routine.. 4266.68 BogoMIPS (lpj=8533373) Feb 24 01:46:45 nobilx kernel: [ 30.734653] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 01:46:45 nobilx kernel: [ 30.734654] CPU: L3 cache: 4096K Feb 24 01:46:45 nobilx kernel: [ 30.734656] CPU 1/1 -> Node 0 Feb 24 01:46:45 nobilx kernel: [ 30.734657] CPU: Physical Processor ID: 0 Feb 24 01:46:45 nobilx kernel: [ 30.734658] CPU: Processor Core ID: 0 Feb 24 01:46:45 nobilx kernel: [ 30.734663] CPU1: Thermal monitoring enabled (TM2) Feb 24 01:46:45 nobilx kernel: [ 30.735127] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 24 01:46:45 nobilx kernel: [ 30.735225] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 24 01:46:45 nobilx kernel: [ 30.755245] Brought up 2 CPUs Feb 24 01:46:45 nobilx kernel: [ 30.755312] CPU0 attaching sched-domain: Feb 24 01:46:45 nobilx kernel: [ 30.755313] domain 0: span 03 Feb 24 01:46:45 nobilx kernel: [ 30.755315] groups: 01 02 Feb 24 01:46:45 nobilx kernel: [ 30.755317] domain 1: span 03 Feb 24 01:46:45 nobilx kernel: [ 30.755318] groups: 03 Feb 24 01:46:45 nobilx kernel: [ 30.755320] CPU1 attaching sched-domain: Feb 24 01:46:45 nobilx kernel: [ 30.755321] domain 0: span 03 Feb 24 01:46:45 nobilx kernel: [ 30.755322] groups: 02 01 Feb 24 01:46:45 nobilx kernel: [ 30.755324] domain 1: span 03 Feb 24 01:46:45 nobilx kernel: [ 30.755326] groups: 03 Feb 24 01:46:45 nobilx kernel: [ 30.755511] net_namespace: 120 bytes Feb 24 01:46:45 nobilx kernel: [ 30.755838] Time: 0:46:20 Date: 02/24/08 Feb 24 01:46:45 nobilx kernel: [ 30.755880] NET: Registered protocol family 16 Feb 24 01:46:45 nobilx kernel: [ 30.756041] ACPI: bus type pci registered Feb 24 01:46:45 nobilx kernel: [ 30.756104] PCI: Using configuration type 1 Feb 24 01:46:45 nobilx kernel: [ 30.758995] ACPI: EC: Look up EC in DSDT Feb 24 01:46:45 nobilx kernel: [ 30.765798] ACPI: Interpreter enabled Feb 24 01:46:45 nobilx kernel: [ 30.765800] ACPI: (supports S0 S1 S3 S4 S5) Feb 24 01:46:45 nobilx kernel: [ 30.765813] ACPI: Using IOAPIC for interrupt routing Feb 24 01:46:45 nobilx kernel: [ 30.771605] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 24 01:46:45 nobilx kernel: [ 30.772184] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 24 01:46:45 nobilx kernel: [ 30.772188] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 24 01:46:45 nobilx kernel: [ 30.772887] PCI: Transparent bridge - 0000:00:1e.0 Feb 24 01:46:45 nobilx kernel: [ 30.772915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.773068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.773149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.773272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.773355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.773439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 24 01:46:45 nobilx kernel: [ 30.775928] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776040] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776260] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 24 01:46:45 nobilx kernel: [ 30.776369] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 24 01:46:45 nobilx kernel: [ 30.776480] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776589] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776698] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 24 01:46:45 nobilx kernel: [ 30.776810] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 24 01:46:45 nobilx kernel: [ 30.776815] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 24 01:46:45 nobilx kernel: [ 30.776840] pnp: PnP ACPI init Feb 24 01:46:45 nobilx kernel: [ 30.776847] ACPI: bus type pnp registered Feb 24 01:46:45 nobilx kernel: [ 30.779220] pnp: PnP ACPI: found 13 devices Feb 24 01:46:45 nobilx kernel: [ 30.779222] ACPI: ACPI bus type pnp unregistered Feb 24 01:46:45 nobilx kernel: [ 30.779417] PCI: Using ACPI for IRQ routing Feb 24 01:46:45 nobilx kernel: [ 30.779419] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 24 01:46:45 nobilx kernel: [ 30.794802] NET: Registered protocol family 8 Feb 24 01:46:45 nobilx kernel: [ 30.794804] NET: Registered protocol family 20 Feb 24 01:46:45 nobilx kernel: [ 30.794840] PCI-GART: No AMD northbridge found. Feb 24 01:46:45 nobilx kernel: [ 30.794845] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 24 01:46:45 nobilx kernel: [ 30.794848] hpet0: 3 64-bit timers, 14318180 Hz Feb 24 01:46:45 nobilx kernel: [ 30.795876] AppArmor: AppArmor Filesystem Enabled Feb 24 01:46:45 nobilx kernel: [ 30.795886] ACPI: RTC can wake from S4 Feb 24 01:46:45 nobilx kernel: [ 30.798799] Time: tsc clocksource has been installed. Feb 24 01:46:45 nobilx kernel: [ 30.798808] Switched to high resolution mode on CPU 0 Feb 24 01:46:45 nobilx kernel: [ 30.799413] Switched to high resolution mode on CPU 1 Feb 24 01:46:45 nobilx kernel: [ 30.806820] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806829] system 00:07: ioport range 0x290-0x297 has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806835] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806838] system 00:08: ioport range 0x800-0x87f has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806840] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806844] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806847] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806849] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806852] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806855] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806858] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806864] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806867] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806872] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806880] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806882] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 24 01:46:45 nobilx kernel: [ 30.806885] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806888] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.806891] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 24 01:46:45 nobilx kernel: [ 30.807293] PCI: Bridge: 0000:00:01.0 Feb 24 01:46:45 nobilx kernel: [ 30.807295] IO window: a000-afff Feb 24 01:46:45 nobilx kernel: [ 30.807298] MEM window: fa700000-fe7fffff Feb 24 01:46:45 nobilx kernel: [ 30.807300] PREFETCH window: bfe00000-dfdfffff Feb 24 01:46:45 nobilx kernel: [ 30.807303] PCI: Bridge: 0000:00:1c.0 Feb 24 01:46:45 nobilx kernel: [ 30.807304] IO window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807307] MEM window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807309] PREFETCH window: dfe00000-dfefffff Feb 24 01:46:45 nobilx kernel: [ 30.807313] PCI: Bridge: 0000:00:1c.4 Feb 24 01:46:45 nobilx kernel: [ 30.807315] IO window: c000-cfff Feb 24 01:46:45 nobilx kernel: [ 30.807319] MEM window: fe900000-fe9fffff Feb 24 01:46:45 nobilx kernel: [ 30.807321] PREFETCH window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807325] PCI: Bridge: 0000:00:1c.5 Feb 24 01:46:45 nobilx kernel: [ 30.807326] IO window: b000-bfff Feb 24 01:46:45 nobilx kernel: [ 30.807330] MEM window: fe800000-fe8fffff Feb 24 01:46:45 nobilx kernel: [ 30.807332] PREFETCH window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807336] PCI: Bridge: 0000:00:1e.0 Feb 24 01:46:45 nobilx kernel: [ 30.807337] IO window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807340] MEM window: fea00000-feafffff Feb 24 01:46:45 nobilx kernel: [ 30.807343] PREFETCH window: disabled. Feb 24 01:46:45 nobilx kernel: [ 30.807354] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 30.807358] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 30.807371] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 30.807375] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 30.807389] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 30.807392] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 01:46:45 nobilx kernel: [ 30.807406] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:46:45 nobilx kernel: [ 30.807410] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 01:46:45 nobilx kernel: [ 30.807418] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 30.807425] NET: Registered protocol family 2 Feb 24 01:46:45 nobilx kernel: [ 30.842952] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 24 01:46:45 nobilx kernel: [ 30.844018] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 24 01:46:45 nobilx kernel: [ 30.847916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 24 01:46:45 nobilx kernel: [ 30.848513] TCP: Hash tables configured (established 524288 bind 65536) Feb 24 01:46:45 nobilx kernel: [ 30.848515] TCP reno registered Feb 24 01:46:45 nobilx kernel: [ 30.858955] checking if image is initramfs... it is Feb 24 01:46:45 nobilx kernel: [ 31.509959] Freeing initrd memory: 7831k freed Feb 24 01:46:45 nobilx kernel: [ 31.513217] audit: initializing netlink socket (disabled) Feb 24 01:46:45 nobilx kernel: [ 31.513229] audit(1203813980.392:1): initialized Feb 24 01:46:45 nobilx kernel: [ 31.515076] VFS: Disk quotas dquot_6.5.1 Feb 24 01:46:45 nobilx kernel: [ 31.515135] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 24 01:46:45 nobilx kernel: [ 31.515238] io scheduler noop registered Feb 24 01:46:45 nobilx kernel: [ 31.515239] io scheduler anticipatory registered Feb 24 01:46:45 nobilx kernel: [ 31.515241] io scheduler deadline registered Feb 24 01:46:45 nobilx kernel: [ 31.515331] io scheduler cfq registered (default) Feb 24 01:46:45 nobilx kernel: [ 31.671404] Boot video device is 0000:01:00.0 Feb 24 01:46:45 nobilx kernel: [ 31.671530] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 31.671556] assign_interrupt_mode Found MSI capability Feb 24 01:46:45 nobilx kernel: [ 31.671577] Allocate Port Service[0000:00:01.0:pcie00] Feb 24 01:46:45 nobilx kernel: [ 31.671639] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 31.671671] assign_interrupt_mode Found MSI capability Feb 24 01:46:45 nobilx kernel: [ 31.671697] Allocate Port Service[0000:00:1c.0:pcie00] Feb 24 01:46:45 nobilx kernel: [ 31.671723] Allocate Port Service[0000:00:1c.0:pcie02] Feb 24 01:46:45 nobilx kernel: [ 31.671787] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 01:46:45 nobilx kernel: [ 31.671819] assign_interrupt_mode Found MSI capability Feb 24 01:46:45 nobilx kernel: [ 31.671845] Allocate Port Service[0000:00:1c.4:pcie00] Feb 24 01:46:45 nobilx kernel: [ 31.671871] Allocate Port Service[0000:00:1c.4:pcie02] Feb 24 01:46:45 nobilx kernel: [ 31.671936] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 01:46:45 nobilx kernel: [ 31.671968] assign_interrupt_mode Found MSI capability Feb 24 01:46:45 nobilx kernel: [ 31.671994] Allocate Port Service[0000:00:1c.5:pcie00] Feb 24 01:46:45 nobilx kernel: [ 31.672021] Allocate Port Service[0000:00:1c.5:pcie02] Feb 24 01:46:45 nobilx kernel: [ 31.692007] Real Time Clock Driver v1.12ac Feb 24 01:46:45 nobilx kernel: [ 31.692149] hpet_resources: 0xfed00000 is busy Feb 24 01:46:45 nobilx kernel: [ 31.692183] Linux agpgart interface v0.102 Feb 24 01:46:45 nobilx kernel: [ 31.692185] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 24 01:46:45 nobilx kernel: [ 31.692288] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 01:46:45 nobilx kernel: [ 31.692708] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 01:46:45 nobilx kernel: [ 31.693284] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 24 01:46:45 nobilx kernel: [ 31.693336] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 24 01:46:45 nobilx kernel: [ 31.693442] PNP: No PS/2 controller found. Probing ports directly. Feb 24 01:46:45 nobilx kernel: [ 31.696123] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 24 01:46:45 nobilx kernel: [ 31.696126] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 24 01:46:45 nobilx kernel: [ 31.706906] mice: PS/2 mouse device common for all mice Feb 24 01:46:45 nobilx kernel: [ 31.706945] cpuidle: using governor ladder Feb 24 01:46:45 nobilx kernel: [ 31.706947] cpuidle: using governor menu Feb 24 01:46:45 nobilx kernel: [ 31.707075] NET: Registered protocol family 1 Feb 24 01:46:45 nobilx kernel: [ 31.707115] registered taskstats version 1 Feb 24 01:46:45 nobilx kernel: [ 31.707197] Magic number: 12:11:760 Feb 24 01:46:45 nobilx kernel: [ 31.707252] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 24 01:46:45 nobilx kernel: [ 31.707259] Freeing unused kernel memory: 316k freed Feb 24 01:46:45 nobilx kernel: [ 32.860741] fuse init (API version 7.9) Feb 24 01:46:45 nobilx kernel: [ 32.868554] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 24 01:46:45 nobilx kernel: [ 32.869070] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 24 01:46:45 nobilx kernel: [ 32.869459] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 01:46:45 nobilx kernel: [ 32.869469] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 01:46:45 nobilx kernel: [ 33.065059] usbcore: registered new interface driver usbfs Feb 24 01:46:45 nobilx kernel: [ 33.065075] usbcore: registered new interface driver hub Feb 24 01:46:45 nobilx kernel: [ 33.065094] usbcore: registered new device driver usb Feb 24 01:46:45 nobilx kernel: [ 33.065657] USB Universal Host Controller Interface driver v3.0 Feb 24 01:46:45 nobilx kernel: [ 33.065694] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 33.065702] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.065705] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.065897] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 24 01:46:45 nobilx kernel: [ 33.065921] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 24 01:46:45 nobilx kernel: [ 33.066019] usb usb1: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.066036] hub 1-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.066041] hub 1-0:1.0: 2 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.110736] SCSI subsystem initialized Feb 24 01:46:45 nobilx kernel: [ 33.166754] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:46:45 nobilx kernel: [ 33.166764] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.166767] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.166784] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 Feb 24 01:46:45 nobilx kernel: [ 33.166808] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 24 01:46:45 nobilx kernel: [ 33.166892] usb usb2: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.166909] hub 2-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.166915] hub 2-0:1.0: 2 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.167015] libata version 3.00 loaded. Feb 24 01:46:45 nobilx kernel: [ 33.270763] ACPI: PCI Interrupt 0000:05:03.0[A] -> <6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 01:46:45 nobilx kernel: [ 33.270768] GSI 21 (level, low) -> IRQ 21 Feb 24 01:46:45 nobilx kernel: [ 33.271781] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.271786] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.271824] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 Feb 24 01:46:45 nobilx kernel: [ 33.275729] ehci_hcd 0000:00:1a.7: debug port 1 Feb 24 01:46:45 nobilx kernel: [ 33.275734] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 24 01:46:45 nobilx kernel: [ 33.275742] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 24 01:46:45 nobilx kernel: [ 33.290650] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 01:46:45 nobilx kernel: [ 33.290738] usb usb3: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.290758] hub 3-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.290763] hub 3-0:1.0: 4 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.321525] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 24 01:46:45 nobilx kernel: [ 33.394721] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 01:46:45 nobilx kernel: [ 33.394730] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.394733] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.394751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 Feb 24 01:46:45 nobilx kernel: [ 33.394774] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 24 01:46:45 nobilx kernel: [ 33.394857] usb usb4: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.394875] hub 4-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.394879] hub 4-0:1.0: 2 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.498733] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 01:46:45 nobilx kernel: [ 33.498743] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.498747] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.498769] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 Feb 24 01:46:45 nobilx kernel: [ 33.498794] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 24 01:46:45 nobilx kernel: [ 33.498912] usb usb5: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.498929] hub 5-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.498934] hub 5-0:1.0: 2 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.602743] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 01:46:45 nobilx kernel: [ 33.602750] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.602754] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.602775] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 Feb 24 01:46:45 nobilx kernel: [ 33.602797] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 24 01:46:45 nobilx kernel: [ 33.602907] usb usb6: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.602935] hub 6-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.602939] hub 6-0:1.0: 2 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.670673] usb 3-3: new high speed USB device using ehci_hcd and address 2 Feb 24 01:46:45 nobilx kernel: [ 33.706822] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 01:46:45 nobilx kernel: [ 33.707778] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 24 01:46:45 nobilx kernel: [ 33.707783] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 24 01:46:45 nobilx kernel: [ 33.707823] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 Feb 24 01:46:45 nobilx kernel: [ 33.711719] ehci_hcd 0000:00:1d.7: debug port 1 Feb 24 01:46:45 nobilx kernel: [ 33.711724] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 24 01:46:45 nobilx kernel: [ 33.711730] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 24 01:46:45 nobilx kernel: [ 33.794642] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 01:46:45 nobilx kernel: [ 33.794762] usb usb7: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.794786] hub 7-0:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 33.794792] hub 7-0:1.0: 6 ports detected Feb 24 01:46:45 nobilx kernel: [ 33.804980] usb 3-3: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 33.902738] ahci 0000:00:1f.2: version 3.0 Feb 24 01:46:45 nobilx kernel: [ 33.902762] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 01:46:45 nobilx kernel: [ 34.542601] usb 7-2: new high speed USB device using ehci_hcd and address 3 Feb 24 01:46:45 nobilx kernel: [ 34.594719] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 24 01:46:45 nobilx kernel: [ 34.674981] usb 7-2: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 34.675047] hub 7-2:1.0: USB hub found Feb 24 01:46:45 nobilx kernel: [ 34.675151] hub 7-2:1.0: 4 ports detected Feb 24 01:46:45 nobilx kernel: [ 34.778701] usbcore: registered new interface driver libusual Feb 24 01:46:45 nobilx kernel: [ 34.781710] Initializing USB Mass Storage driver... Feb 24 01:46:45 nobilx kernel: [ 34.907118] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 24 01:46:45 nobilx kernel: [ 34.907123] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 24 01:46:45 nobilx kernel: [ 34.907127] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 24 01:46:45 nobilx kernel: [ 34.907810] scsi0 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.907974] scsi1 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.908096] scsi2 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.908218] scsi3 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.908338] scsi4 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.908461] scsi5 : ahci Feb 24 01:46:45 nobilx kernel: [ 34.908546] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 Feb 24 01:46:45 nobilx kernel: [ 34.908548] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 Feb 24 01:46:45 nobilx kernel: [ 34.908550] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 Feb 24 01:46:45 nobilx kernel: [ 34.908553] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 Feb 24 01:46:45 nobilx kernel: [ 34.908555] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 Feb 24 01:46:45 nobilx kernel: [ 34.908557] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 Feb 24 01:46:45 nobilx kernel: [ 35.018571] usb 4-1: new full speed USB device using uhci_hcd and address 2 Feb 24 01:46:45 nobilx kernel: [ 35.200882] usb 4-1: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 35.217988] scsi6 : SCSI emulation for USB Mass Storage devices Feb 24 01:46:45 nobilx kernel: [ 35.218979] usb-storage: device found at 2 Feb 24 01:46:45 nobilx kernel: [ 35.218981] usb-storage: waiting for device to settle before scanning Feb 24 01:46:45 nobilx kernel: [ 35.382608] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 35.389453] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-16, max UDMA/100 Feb 24 01:46:45 nobilx kernel: [ 35.389457] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 01:46:45 nobilx kernel: [ 35.396365] ata1.00: configured for UDMA/100 Feb 24 01:46:45 nobilx kernel: [ 35.418655] usb 7-2.3: new low speed USB device using ehci_hcd and address 4 Feb 24 01:46:45 nobilx kernel: [ 35.532234] usb 7-2.3: configuration #1 chosen from 1 choice Feb 24 01:46:45 nobilx kernel: [ 35.533062] usbcore: registered new interface driver hiddev Feb 24 01:46:45 nobilx kernel: [ 35.533064] usbcore: registered new interface driver usb-storage Feb 24 01:46:45 nobilx kernel: [ 35.533066] USB Mass Storage support registered. Feb 24 01:46:45 nobilx kernel: [ 35.535997] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input1 Feb 24 01:46:45 nobilx kernel: [ 35.558565] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:46:45 nobilx kernel: [ 35.561802] Fixing up Logitech keyboard report descriptor Feb 24 01:46:45 nobilx kernel: [ 35.562335] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input2 Feb 24 01:46:45 nobilx kernel: [ 35.586600] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 01:46:45 nobilx kernel: [ 35.589362] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.3/7-2.3:1.0/input/input3 Feb 24 01:46:45 nobilx kernel: [ 35.598576] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 24 01:46:45 nobilx kernel: [ 35.598588] usbcore: registered new interface driver usbhid Feb 24 01:46:45 nobilx kernel: [ 35.598591] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 24 01:46:45 nobilx kernel: [ 35.870518] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 35.890846] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 Feb 24 01:46:45 nobilx kernel: [ 35.890850] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 01:46:45 nobilx kernel: [ 35.892803] ata2.00: configured for UDMA/133 Feb 24 01:46:45 nobilx kernel: [ 36.203006] ata3: SATA link down (SStatus 0 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 36.514487] ata4: SATA link down (SStatus 0 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 36.826968] ata5: SATA link down (SStatus 0 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 37.302456] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 37.461467] ata6.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 24 01:46:45 nobilx kernel: [ 37.461471] ata6.00: applying bridge limits Feb 24 01:46:45 nobilx kernel: [ 37.617446] ata6.00: configured for UDMA/33 Feb 24 01:46:45 nobilx kernel: [ 37.617546] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5 Feb 24 01:46:45 nobilx kernel: [ 37.617656] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 Feb 24 01:46:45 nobilx kernel: [ 37.618757] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 24 01:46:45 nobilx kernel: [ 37.618840] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 38.622387] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Feb 24 01:46:45 nobilx kernel: [ 38.622391] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Feb 24 01:46:45 nobilx kernel: [ 38.622398] PCI: Setting latency timer of device 0000:03:00.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 38.622493] scsi7 : ahci Feb 24 01:46:45 nobilx kernel: [ 38.622549] scsi8 : ahci Feb 24 01:46:45 nobilx kernel: [ 38.622618] ata7: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 Feb 24 01:46:45 nobilx kernel: [ 38.622622] ata8: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 Feb 24 01:46:45 nobilx kernel: [ 38.942361] ata7: SATA link down (SStatus 0 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 39.262339] ata8: SATA link down (SStatus 0 SControl 300) Feb 24 01:46:45 nobilx kernel: [ 39.262414] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:46:45 nobilx kernel: [ 39.262449] PCI: Setting latency timer of device 0000:03:00.1 to 64 Feb 24 01:46:45 nobilx kernel: [ 39.263286] scsi9 : pata_jmicron Feb 24 01:46:45 nobilx kernel: [ 39.263928] scsi10 : pata_jmicron Feb 24 01:46:45 nobilx kernel: [ 39.264492] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 Feb 24 01:46:45 nobilx kernel: [ 39.264495] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 Feb 24 01:46:45 nobilx kernel: [ 39.269039] Driver 'sd' needs updating - please use bus_type methods Feb 24 01:46:45 nobilx kernel: [ 39.269102] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 01:46:45 nobilx kernel: [ 39.269112] sd 0:0:0:0: [sda] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.269114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.269127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.269162] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 01:46:45 nobilx kernel: [ 39.269170] sd 0:0:0:0: [sda] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.269171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.269184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.269187] sda:<4>Driver 'sr' needs updating - please use bus_type methods Feb 24 01:46:45 nobilx kernel: [ 39.426946] ata9.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100 Feb 24 01:46:45 nobilx kernel: [ 39.426950] ata9.00: 488397168 sectors, multi 0: LBA48 Feb 24 01:46:45 nobilx kernel: [ 39.466959] ata9.00: configured for UDMA/100 Feb 24 01:46:45 nobilx kernel: [ 39.633803] scsi 9:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 Feb 24 01:46:45 nobilx kernel: [ 39.838867] sda1 sda2 sda3 sda4 Feb 24 01:46:45 nobilx kernel: [ 39.838967] sd 0:0:0:0: [sda] Attached SCSI disk Feb 24 01:46:45 nobilx kernel: [ 39.839019] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 01:46:45 nobilx kernel: [ 39.839032] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.839034] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.839052] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.839095] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 01:46:45 nobilx kernel: [ 39.839105] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.839108] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.839128] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.839131] sdb: sdb1 sdb2 sdb3 Feb 24 01:46:45 nobilx kernel: [ 39.849794] sd 1:0:0:0: [sdb] Attached SCSI disk Feb 24 01:46:45 nobilx kernel: [ 39.849843] sd 9:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Feb 24 01:46:45 nobilx kernel: [ 39.849853] sd 9:0:0:0: [sdc] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.849855] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.849873] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.849909] sd 9:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Feb 24 01:46:45 nobilx kernel: [ 39.849920] sd 9:0:0:0: [sdc] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 39.849922] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 01:46:45 nobilx kernel: [ 39.849942] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 01:46:45 nobilx kernel: [ 39.849945] sdc: Feb 24 01:46:45 nobilx kernel: [ 39.857618] sd 9:0:0:0: [sdc] Attached SCSI disk Feb 24 01:46:45 nobilx kernel: [ 39.860601] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 24 01:46:45 nobilx kernel: [ 39.860604] Uniform CD-ROM driver Revision: 3.20 Feb 24 01:46:45 nobilx kernel: [ 39.860635] sr 5:0:0:0: Attached scsi CD-ROM sr0 Feb 24 01:46:45 nobilx kernel: [ 39.861175] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 24 01:46:45 nobilx kernel: [ 39.861191] sd 1:0:0:0: Attached scsi generic sg1 type 0 Feb 24 01:46:45 nobilx kernel: [ 39.861205] sr 5:0:0:0: Attached scsi generic sg2 type 5 Feb 24 01:46:45 nobilx kernel: [ 39.861218] sd 9:0:0:0: Attached scsi generic sg3 type 0 Feb 24 01:46:45 nobilx kernel: [ 40.163750] EXT3-fs: INFO: recovery required on readonly filesystem. Feb 24 01:46:45 nobilx kernel: [ 40.163753] EXT3-fs: write access will be enabled during recovery. Feb 24 01:46:45 nobilx kernel: [ 40.218436] usb-storage: device scan complete Feb 24 01:46:45 nobilx kernel: [ 40.218927] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 24 01:46:45 nobilx kernel: [ 40.219429] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 24 01:46:45 nobilx kernel: [ 40.219928] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 24 01:46:45 nobilx kernel: [ 40.220429] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 24 01:46:45 nobilx kernel: [ 40.221700] sd 6:0:0:0: [sdd] Attached SCSI removable disk Feb 24 01:46:45 nobilx kernel: [ 40.221727] sd 6:0:0:0: Attached scsi generic sg4 type 0 Feb 24 01:46:45 nobilx kernel: [ 40.395797] sd 6:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 01:46:45 nobilx kernel: [ 40.396794] sd 6:0:0:1: [sde] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 40.396796] sd 6:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 01:46:45 nobilx kernel: [ 40.396798] sd 6:0:0:1: [sde] Assuming drive cache: write through Feb 24 01:46:45 nobilx kernel: [ 40.398918] sd 6:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 01:46:45 nobilx kernel: [ 40.399918] sd 6:0:0:1: [sde] Write Protect is off Feb 24 01:46:45 nobilx kernel: [ 40.399920] sd 6:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 01:46:45 nobilx kernel: [ 40.399922] sd 6:0:0:1: [sde] Assuming drive cache: write through Feb 24 01:46:45 nobilx kernel: [ 40.399925] sde: unknown partition table Feb 24 01:46:45 nobilx kernel: [ 40.407208] sd 6:0:0:1: [sde] Attached SCSI removable disk Feb 24 01:46:45 nobilx kernel: [ 40.407242] sd 6:0:0:1: Attached scsi generic sg5 type 0 Feb 24 01:46:45 nobilx kernel: [ 40.408698] sd 6:0:0:2: [sdf] Attached SCSI removable disk Feb 24 01:46:45 nobilx kernel: [ 40.408725] sd 6:0:0:2: Attached scsi generic sg6 type 0 Feb 24 01:46:45 nobilx kernel: [ 40.409698] sd 6:0:0:3: [sdg] Attached SCSI removable disk Feb 24 01:46:45 nobilx kernel: [ 40.409723] sd 6:0:0:3: Attached scsi generic sg7 type 0 Feb 24 01:46:45 nobilx kernel: [ 43.762213] kjournald starting. Commit interval 5 seconds Feb 24 01:46:45 nobilx kernel: [ 43.762224] EXT3-fs: sda4: orphan cleanup on readonly fs Feb 24 01:46:45 nobilx kernel: [ 43.762229] ext3_orphan_cleanup: deleting unreferenced inode 1081386 Feb 24 01:46:45 nobilx kernel: [ 43.762249] ext3_orphan_cleanup: deleting unreferenced inode 1081358 Feb 24 01:46:45 nobilx kernel: [ 43.762254] EXT3-fs: sda4: 2 orphan inodes deleted Feb 24 01:46:45 nobilx kernel: [ 43.762256] EXT3-fs: recovery complete. Feb 24 01:46:45 nobilx kernel: [ 43.766694] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 01:46:45 nobilx kernel: [ 50.569000] input: PC Speaker as /devices/platform/pcspkr/input/input4 Feb 24 01:46:45 nobilx kernel: [ 50.638218] iTCO_vendor_support: vendor-support=0 Feb 24 01:46:45 nobilx kernel: [ 50.670210] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 24 01:46:45 nobilx kernel: [ 50.670271] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 24 01:46:45 nobilx kernel: [ 50.670301] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 24 01:46:45 nobilx kernel: [ 50.744875] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 24 01:46:45 nobilx kernel: [ 50.778223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 24 01:46:45 nobilx kernel: [ 50.820072] input: Power Button (FF) as /devices/virtual/input/input5 Feb 24 01:46:45 nobilx kernel: [ 50.877892] ACPI: Power Button (FF) [PWRF] Feb 24 01:46:45 nobilx kernel: [ 50.878280] input: Power Button (CM) as /devices/virtual/input/input6 Feb 24 01:46:45 nobilx kernel: [ 50.937659] ACPI: Power Button (CM) [PWRB] Feb 24 01:46:45 nobilx kernel: [ 51.171360] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 24 01:46:45 nobilx kernel: [ 51.171370] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 51.172194] sky2 0000:02:00.0: v1.20 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 24 01:46:45 nobilx kernel: [ 51.172524] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 24 01:46:45 nobilx kernel: [ 51.450878] nvidia: module license 'NVIDIA' taints kernel. Feb 24 01:46:45 nobilx kernel: [ 51.743288] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 01:46:45 nobilx kernel: [ 51.743295] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 51.743385] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 24 01:46:45 nobilx kernel: [ 51.801695] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 24 01:46:45 nobilx kernel: [ 51.802511] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 24 01:46:45 nobilx kernel: [ 52.289327] sky2 eth0: enabling interface Feb 24 01:46:45 nobilx kernel: [ 52.694998] lp: driver loaded but no devices found Feb 24 01:46:45 nobilx kernel: [ 53.015301] NET: Registered protocol family 10 Feb 24 01:46:45 nobilx kernel: [ 53.015479] lo: Disabled Privacy Extensions Feb 24 01:46:45 nobilx kernel: [ 53.015731] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 24 01:46:45 nobilx kernel: [ 53.511131] EXT3 FS on sda4, internal journal Feb 24 01:46:45 nobilx kernel: [ 53.621328] device-mapper: uevent: version 1.0.3 Feb 24 01:46:45 nobilx kernel: [ 53.621350] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 24 01:46:45 nobilx kernel: [ 54.633363] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 24 01:46:45 nobilx kernel: [ 54.638209] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 24 01:46:45 nobilx kernel: [ 54.785083] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 24 01:46:45 nobilx kernel: [ 55.012586] No dock devices found. Feb 24 01:46:45 nobilx kernel: [ 55.112241] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 01:46:47 nobilx kernel: [ 57.812073] ppdev: user-space parallel port driver Feb 24 01:46:48 nobilx kernel: [ 58.705054] audit(1203814008.061:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5663 profile="/usr/sbin/cupsd" namespace="default" Feb 24 01:46:52 nobilx kernel: [ 63.303841] Bluetooth: Core ver 2.11 Feb 24 01:46:52 nobilx kernel: [ 63.303891] NET: Registered protocol family 31 Feb 24 01:46:52 nobilx kernel: [ 63.303893] Bluetooth: HCI device and connection manager initialized Feb 24 01:46:52 nobilx kernel: [ 63.303897] Bluetooth: HCI socket layer initialized Feb 24 01:46:52 nobilx kernel: [ 63.320170] Bluetooth: L2CAP ver 2.9 Feb 24 01:46:52 nobilx kernel: [ 63.320175] Bluetooth: L2CAP socket layer initialized Feb 24 01:46:52 nobilx kernel: [ 63.411059] Bluetooth: RFCOMM socket layer initialized Feb 24 01:46:52 nobilx kernel: [ 63.411072] Bluetooth: RFCOMM TTY layer initialized Feb 24 01:46:52 nobilx kernel: [ 63.411074] Bluetooth: RFCOMM ver 1.8 Feb 24 01:46:54 nobilx kernel: [ 65.056821] eth0: no IPv6 routers present Feb 24 01:47:28 nobilx kernel: [ 99.502848] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:52:08 nobilx kernel: [ 379.526749] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:56:12 nobilx kernel: [ 623.512718] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 01:56:34 nobilx kernel: [ 645.515457] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:04:57 nobilx kernel: [ 1147.786658] usb 7-2.1: new full speed USB device using ehci_hcd and address 5 Feb 24 02:04:57 nobilx kernel: [ 1148.098143] usb 7-2.1: configuration #1 chosen from 1 choice Feb 24 02:04:57 nobilx kernel: [ 1148.203225] Bluetooth: HCI USB driver ver 2.9 Feb 24 02:04:57 nobilx kernel: [ 1148.441867] usbcore: registered new interface driver hci_usb Feb 24 02:16:12 nobilx kernel: [ 1823.423727] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:17:24 nobilx kernel: [ 1895.527579] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:26:44 nobilx kernel: [ 2455.388647] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:33:59 nobilx kernel: [ 2889.502426] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:42:47 nobilx kernel: [ 3417.532067] usb 3-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 02:44:49 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 02:44:49 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 02:44:49 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 02:44:49 nobilx kernel: Loaded 35319 symbols from 84 modules. Feb 24 02:44:49 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 24 02:44:49 nobilx kernel: [ 0.000000] Command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 24 02:44:49 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 24 02:44:49 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 24 02:44:49 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 02:44:49 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 24 02:44:49 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 24 02:44:49 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 24 02:44:49 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 24 02:44:49 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 24 02:44:49 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 24 02:44:49 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 24 02:44:49 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 24 02:44:49 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 24 02:44:49 nobilx kernel: [ 0.000000] Processor #1 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 24 02:44:49 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 24 02:44:49 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 24 02:44:49 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 24 02:44:49 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 24 02:44:49 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 24 02:44:49 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 24 02:44:49 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 24 02:44:49 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 02:44:49 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 24 02:44:49 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 24 02:44:49 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 24 02:44:49 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 24 02:44:49 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 24 02:44:49 nobilx kernel: [ 30.952781] time.c: Detected 2133.332 MHz processor. Feb 24 02:44:49 nobilx kernel: [ 30.953825] Console: colour VGA+ 80x25 Feb 24 02:44:49 nobilx kernel: [ 30.953828] console [tty0] enabled Feb 24 02:44:49 nobilx kernel: [ 30.953845] Checking aperture... Feb 24 02:44:49 nobilx kernel: [ 30.953852] Calgary: detecting Calgary via BIOS EBDA area Feb 24 02:44:49 nobilx kernel: [ 30.953853] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 24 02:44:49 nobilx kernel: [ 30.953855] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 24 02:44:49 nobilx kernel: [ 30.992376] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 24 02:44:49 nobilx kernel: [ 31.030028] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 24 02:44:49 nobilx kernel: [ 31.030059] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 24 02:44:49 nobilx kernel: [ 31.106770] Calibrating delay using timer specific routine.. 4269.68 BogoMIPS (lpj=8539363) Feb 24 02:44:49 nobilx kernel: [ 31.106801] Security Framework initialized Feb 24 02:44:49 nobilx kernel: [ 31.106806] SELinux: Disabled at boot. Feb 24 02:44:49 nobilx kernel: [ 31.106816] AppArmor: AppArmor initialized Feb 24 02:44:49 nobilx kernel: [ 31.106819] Failure registering capabilities with primary security module. Feb 24 02:44:49 nobilx kernel: [ 31.107212] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 24 02:44:49 nobilx kernel: [ 31.109810] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 24 02:44:49 nobilx kernel: [ 31.111046] Mount-cache hash table entries: 256 Feb 24 02:44:49 nobilx kernel: [ 31.111177] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 02:44:49 nobilx kernel: [ 31.111179] CPU: L3 cache: 4096K Feb 24 02:44:49 nobilx kernel: [ 31.111181] CPU 0/0 -> Node 0 Feb 24 02:44:49 nobilx kernel: [ 31.111182] using mwait in idle threads. Feb 24 02:44:49 nobilx kernel: [ 31.111184] CPU: Physical Processor ID: 0 Feb 24 02:44:49 nobilx kernel: [ 31.111185] CPU: Processor Core ID: 0 Feb 24 02:44:49 nobilx kernel: [ 31.111191] CPU0: Thermal monitoring enabled (TM2) Feb 24 02:44:49 nobilx kernel: [ 31.111203] SMP alternatives: switching to UP code Feb 24 02:44:49 nobilx kernel: [ 31.111894] Early unpacking initramfs... done Feb 24 02:44:49 nobilx kernel: [ 31.442241] ACPI: Core revision 20070126 Feb 24 02:44:49 nobilx kernel: [ 31.442288] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 24 02:44:49 nobilx kernel: [ 31.517321] Using local APIC timer interrupts. Feb 24 02:44:49 nobilx kernel: [ 31.564201] APIC timer calibration result 16666653 Feb 24 02:44:49 nobilx kernel: [ 31.564202] Detected 16.666 MHz APIC timer. Feb 24 02:44:49 nobilx kernel: [ 31.564273] SMP alternatives: switching to SMP code Feb 24 02:44:49 nobilx kernel: [ 31.564873] Booting processor 1/2 APIC 0x1 Feb 24 02:44:49 nobilx kernel: [ 31.575269] Initializing CPU#1 Feb 24 02:44:49 nobilx kernel: [ 31.668205] Calibrating delay using timer specific routine.. 6319.03 BogoMIPS (lpj=12638065) Feb 24 02:44:49 nobilx kernel: [ 31.668211] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 02:44:49 nobilx kernel: [ 31.668213] CPU: L3 cache: 4096K Feb 24 02:44:49 nobilx kernel: [ 31.668214] CPU 1/1 -> Node 0 Feb 24 02:44:49 nobilx kernel: [ 31.668216] CPU: Physical Processor ID: 0 Feb 24 02:44:49 nobilx kernel: [ 31.668216] CPU: Processor Core ID: 0 Feb 24 02:44:49 nobilx kernel: [ 31.668222] CPU1: Thermal monitoring enabled (TM2) Feb 24 02:44:49 nobilx kernel: [ 31.668683] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 24 02:44:49 nobilx kernel: [ 31.668765] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 24 02:44:49 nobilx kernel: [ 31.688785] Brought up 2 CPUs Feb 24 02:44:49 nobilx kernel: [ 31.688851] CPU0 attaching sched-domain: Feb 24 02:44:49 nobilx kernel: [ 31.688853] domain 0: span 03 Feb 24 02:44:49 nobilx kernel: [ 31.688854] groups: 01 02 Feb 24 02:44:49 nobilx kernel: [ 31.688857] domain 1: span 03 Feb 24 02:44:49 nobilx kernel: [ 31.688858] groups: 03 Feb 24 02:44:49 nobilx kernel: [ 31.688860] CPU1 attaching sched-domain: Feb 24 02:44:49 nobilx kernel: [ 31.688861] domain 0: span 03 Feb 24 02:44:49 nobilx kernel: [ 31.688862] groups: 02 01 Feb 24 02:44:49 nobilx kernel: [ 31.688864] domain 1: span 03 Feb 24 02:44:49 nobilx kernel: [ 31.688865] groups: 03 Feb 24 02:44:49 nobilx kernel: [ 31.689051] net_namespace: 120 bytes Feb 24 02:44:49 nobilx kernel: [ 31.689378] Time: 1:44:14 Date: 02/24/08 Feb 24 02:44:49 nobilx kernel: [ 31.689420] NET: Registered protocol family 16 Feb 24 02:44:49 nobilx kernel: [ 31.689582] ACPI: bus type pci registered Feb 24 02:44:49 nobilx kernel: [ 31.689646] PCI: Using configuration type 1 Feb 24 02:44:49 nobilx kernel: [ 31.692535] ACPI: EC: Look up EC in DSDT Feb 24 02:44:49 nobilx kernel: [ 31.699344] ACPI: Interpreter enabled Feb 24 02:44:49 nobilx kernel: [ 31.699347] ACPI: (supports S0 S1 S3 S4 S5) Feb 24 02:44:49 nobilx kernel: [ 31.699360] ACPI: Using IOAPIC for interrupt routing Feb 24 02:44:49 nobilx kernel: [ 31.705150] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 24 02:44:49 nobilx kernel: [ 31.705729] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 24 02:44:49 nobilx kernel: [ 31.705733] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 24 02:44:49 nobilx kernel: [ 31.706432] PCI: Transparent bridge - 0000:00:1e.0 Feb 24 02:44:49 nobilx kernel: [ 31.706460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.706612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.706693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.706816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.706900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.706983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 24 02:44:49 nobilx kernel: [ 31.709475] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 24 02:44:49 nobilx kernel: [ 31.709587] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 24 02:44:49 nobilx kernel: [ 31.709697] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 24 02:44:49 nobilx kernel: [ 31.709807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 24 02:44:49 nobilx kernel: [ 31.709916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 24 02:44:49 nobilx kernel: [ 31.710027] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 24 02:44:49 nobilx kernel: [ 31.710136] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 24 02:44:49 nobilx kernel: [ 31.710245] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 24 02:44:49 nobilx kernel: [ 31.710356] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 24 02:44:49 nobilx kernel: [ 31.710362] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 24 02:44:49 nobilx kernel: [ 31.710386] pnp: PnP ACPI init Feb 24 02:44:49 nobilx kernel: [ 31.710394] ACPI: bus type pnp registered Feb 24 02:44:49 nobilx kernel: [ 31.712768] pnp: PnP ACPI: found 13 devices Feb 24 02:44:49 nobilx kernel: [ 31.712770] ACPI: ACPI bus type pnp unregistered Feb 24 02:44:49 nobilx kernel: [ 31.712964] PCI: Using ACPI for IRQ routing Feb 24 02:44:49 nobilx kernel: [ 31.712966] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 24 02:44:49 nobilx kernel: [ 31.728361] NET: Registered protocol family 8 Feb 24 02:44:49 nobilx kernel: [ 31.728363] NET: Registered protocol family 20 Feb 24 02:44:49 nobilx kernel: [ 31.728400] PCI-GART: No AMD northbridge found. Feb 24 02:44:49 nobilx kernel: [ 31.728404] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 24 02:44:49 nobilx kernel: [ 31.728408] hpet0: 3 64-bit timers, 14318180 Hz Feb 24 02:44:49 nobilx kernel: [ 31.729435] AppArmor: AppArmor Filesystem Enabled Feb 24 02:44:49 nobilx kernel: [ 31.729445] ACPI: RTC can wake from S4 Feb 24 02:44:49 nobilx kernel: [ 31.732358] Time: tsc clocksource has been installed. Feb 24 02:44:49 nobilx kernel: [ 31.732367] Switched to high resolution mode on CPU 0 Feb 24 02:44:49 nobilx kernel: [ 31.732953] Switched to high resolution mode on CPU 1 Feb 24 02:44:49 nobilx kernel: [ 31.740379] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740388] system 00:07: ioport range 0x290-0x297 has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740394] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740397] system 00:08: ioport range 0x800-0x87f has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740399] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740402] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740405] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740408] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740411] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740414] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740417] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740423] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740426] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740431] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740439] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740441] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 24 02:44:49 nobilx kernel: [ 31.740444] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740447] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740450] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 24 02:44:49 nobilx kernel: [ 31.740852] PCI: Bridge: 0000:00:01.0 Feb 24 02:44:49 nobilx kernel: [ 31.740854] IO window: a000-afff Feb 24 02:44:49 nobilx kernel: [ 31.740857] MEM window: fa700000-fe7fffff Feb 24 02:44:49 nobilx kernel: [ 31.740859] PREFETCH window: bfe00000-dfdfffff Feb 24 02:44:49 nobilx kernel: [ 31.740861] PCI: Bridge: 0000:00:1c.0 Feb 24 02:44:49 nobilx kernel: [ 31.740862] IO window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740866] MEM window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740868] PREFETCH window: dfe00000-dfefffff Feb 24 02:44:49 nobilx kernel: [ 31.740872] PCI: Bridge: 0000:00:1c.4 Feb 24 02:44:49 nobilx kernel: [ 31.740874] IO window: c000-cfff Feb 24 02:44:49 nobilx kernel: [ 31.740877] MEM window: fe900000-fe9fffff Feb 24 02:44:49 nobilx kernel: [ 31.740880] PREFETCH window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740883] PCI: Bridge: 0000:00:1c.5 Feb 24 02:44:49 nobilx kernel: [ 31.740885] IO window: b000-bfff Feb 24 02:44:49 nobilx kernel: [ 31.740888] MEM window: fe800000-fe8fffff Feb 24 02:44:49 nobilx kernel: [ 31.740891] PREFETCH window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740895] PCI: Bridge: 0000:00:1e.0 Feb 24 02:44:49 nobilx kernel: [ 31.740895] IO window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740899] MEM window: fea00000-feafffff Feb 24 02:44:49 nobilx kernel: [ 31.740901] PREFETCH window: disabled. Feb 24 02:44:49 nobilx kernel: [ 31.740913] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 31.740917] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 31.740930] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 31.740934] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 31.740947] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 31.740951] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 02:44:49 nobilx kernel: [ 31.740965] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 02:44:49 nobilx kernel: [ 31.740969] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 02:44:49 nobilx kernel: [ 31.740977] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 31.740984] NET: Registered protocol family 2 Feb 24 02:44:49 nobilx kernel: [ 31.776512] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 24 02:44:49 nobilx kernel: [ 31.777578] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 24 02:44:49 nobilx kernel: [ 31.781472] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 24 02:44:49 nobilx kernel: [ 31.782068] TCP: Hash tables configured (established 524288 bind 65536) Feb 24 02:44:49 nobilx kernel: [ 31.782071] TCP reno registered Feb 24 02:44:49 nobilx kernel: [ 31.792515] checking if image is initramfs... it is Feb 24 02:44:49 nobilx kernel: [ 32.443515] Freeing initrd memory: 7831k freed Feb 24 02:44:49 nobilx kernel: [ 32.446771] audit: initializing netlink socket (disabled) Feb 24 02:44:49 nobilx kernel: [ 32.446784] audit(1203817454.392:1): initialized Feb 24 02:44:49 nobilx kernel: [ 32.448629] VFS: Disk quotas dquot_6.5.1 Feb 24 02:44:49 nobilx kernel: [ 32.448688] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 24 02:44:49 nobilx kernel: [ 32.448790] io scheduler noop registered Feb 24 02:44:49 nobilx kernel: [ 32.448792] io scheduler anticipatory registered Feb 24 02:44:49 nobilx kernel: [ 32.448794] io scheduler deadline registered Feb 24 02:44:49 nobilx kernel: [ 32.448884] io scheduler cfq registered (default) Feb 24 02:44:49 nobilx kernel: [ 40.447872] 0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 Feb 24 02:44:49 nobilx kernel: [ 40.450467] Boot video device is 0000:01:00.0 Feb 24 02:44:49 nobilx kernel: [ 40.450590] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 40.450616] assign_interrupt_mode Found MSI capability Feb 24 02:44:49 nobilx kernel: [ 40.450638] Allocate Port Service[0000:00:01.0:pcie00] Feb 24 02:44:49 nobilx kernel: [ 40.450700] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 40.450732] assign_interrupt_mode Found MSI capability Feb 24 02:44:49 nobilx kernel: [ 40.450758] Allocate Port Service[0000:00:1c.0:pcie00] Feb 24 02:44:49 nobilx kernel: [ 40.450784] Allocate Port Service[0000:00:1c.0:pcie02] Feb 24 02:44:49 nobilx kernel: [ 40.450848] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 02:44:49 nobilx kernel: [ 40.450880] assign_interrupt_mode Found MSI capability Feb 24 02:44:49 nobilx kernel: [ 40.450906] Allocate Port Service[0000:00:1c.4:pcie00] Feb 24 02:44:49 nobilx kernel: [ 40.450932] Allocate Port Service[0000:00:1c.4:pcie02] Feb 24 02:44:49 nobilx kernel: [ 40.450997] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 02:44:49 nobilx kernel: [ 40.451029] assign_interrupt_mode Found MSI capability Feb 24 02:44:49 nobilx kernel: [ 40.451055] Allocate Port Service[0000:00:1c.5:pcie00] Feb 24 02:44:49 nobilx kernel: [ 40.451082] Allocate Port Service[0000:00:1c.5:pcie02] Feb 24 02:44:49 nobilx kernel: [ 40.470996] Real Time Clock Driver v1.12ac Feb 24 02:44:49 nobilx kernel: [ 40.471138] hpet_resources: 0xfed00000 is busy Feb 24 02:44:49 nobilx kernel: [ 40.471174] Linux agpgart interface v0.102 Feb 24 02:44:49 nobilx kernel: [ 40.471175] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 24 02:44:49 nobilx kernel: [ 40.471280] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 02:44:49 nobilx kernel: [ 40.471698] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 02:44:49 nobilx kernel: [ 40.472284] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 24 02:44:49 nobilx kernel: [ 40.472338] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 24 02:44:49 nobilx kernel: [ 40.472446] PNP: No PS/2 controller found. Probing ports directly. Feb 24 02:44:49 nobilx kernel: [ 40.474831] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 24 02:44:49 nobilx kernel: [ 40.474834] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 24 02:44:49 nobilx kernel: [ 40.484080] mice: PS/2 mouse device common for all mice Feb 24 02:44:49 nobilx kernel: [ 40.484127] cpuidle: using governor ladder Feb 24 02:44:49 nobilx kernel: [ 40.484128] cpuidle: using governor menu Feb 24 02:44:49 nobilx kernel: [ 40.484240] NET: Registered protocol family 1 Feb 24 02:44:49 nobilx kernel: [ 40.484280] registered taskstats version 1 Feb 24 02:44:49 nobilx kernel: [ 40.484362] Magic number: 12:564:711 Feb 24 02:44:49 nobilx kernel: [ 40.484416] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 24 02:44:49 nobilx kernel: [ 40.484422] Freeing unused kernel memory: 316k freed Feb 24 02:44:49 nobilx kernel: [ 41.637933] fuse init (API version 7.9) Feb 24 02:44:49 nobilx kernel: [ 41.645706] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 24 02:44:49 nobilx kernel: [ 41.646222] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 24 02:44:49 nobilx kernel: [ 41.646609] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 02:44:49 nobilx kernel: [ 41.646618] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 02:44:49 nobilx kernel: [ 41.775060] usbcore: registered new interface driver usbfs Feb 24 02:44:49 nobilx kernel: [ 41.775078] usbcore: registered new interface driver hub Feb 24 02:44:49 nobilx kernel: [ 41.775109] usbcore: registered new device driver usb Feb 24 02:44:49 nobilx kernel: [ 41.775950] USB Universal Host Controller Interface driver v3.0 Feb 24 02:44:49 nobilx kernel: [ 41.775989] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 41.775997] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 41.776000] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 41.776201] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 24 02:44:49 nobilx kernel: [ 41.776226] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 24 02:44:49 nobilx kernel: [ 41.776327] usb usb1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 41.776345] hub 1-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 41.776349] hub 1-0:1.0: 2 ports detected Feb 24 02:44:49 nobilx kernel: [ 41.879849] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 02:44:49 nobilx kernel: [ 41.879858] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 24 02:44:49 nobilx kernel: [ 41.879861] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 41.879881] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 Feb 24 02:44:49 nobilx kernel: [ 41.879905] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 24 02:44:49 nobilx kernel: [ 41.879991] usb usb2: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 41.880008] hub 2-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 41.880013] hub 2-0:1.0: 2 ports detected Feb 24 02:44:49 nobilx kernel: [ 41.881526] SCSI subsystem initialized Feb 24 02:44:49 nobilx kernel: [ 41.936818] libata version 3.00 loaded. Feb 24 02:44:49 nobilx kernel: [ 41.984455] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 02:44:49 nobilx kernel: [ 41.984463] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 41.984466] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 41.984486] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 Feb 24 02:44:49 nobilx kernel: [ 41.984510] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 24 02:44:49 nobilx kernel: [ 41.984598] usb usb3: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 41.984620] hub 3-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 41.984625] hub 3-0:1.0: 2 ports detected Feb 24 02:44:49 nobilx kernel: [ 42.087822] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 02:44:49 nobilx kernel: [ 42.087830] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 24 02:44:49 nobilx kernel: [ 42.087833] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 42.087858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 Feb 24 02:44:49 nobilx kernel: [ 42.087880] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 24 02:44:49 nobilx kernel: [ 42.087964] usb usb4: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 42.087982] hub 4-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 42.087987] hub 4-0:1.0: 2 ports detected Feb 24 02:44:49 nobilx kernel: [ 42.191821] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 02:44:49 nobilx kernel: [ 42.191830] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 24 02:44:49 nobilx kernel: [ 42.191833] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 42.191850] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 Feb 24 02:44:49 nobilx kernel: [ 42.191873] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 24 02:44:49 nobilx kernel: [ 42.191956] usb usb5: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 42.191976] hub 5-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 42.191981] hub 5-0:1.0: 2 ports detected Feb 24 02:44:49 nobilx kernel: [ 42.224325] usb 2-1: new full speed USB device using uhci_hcd and address 2 Feb 24 02:44:49 nobilx kernel: [ 42.295856] ahci 0000:00:1f.2: version 3.0 Feb 24 02:44:49 nobilx kernel: [ 42.295882] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 02:44:49 nobilx kernel: [ 42.391031] usb 2-1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 42.631759] usb 3-1: new full speed USB device using uhci_hcd and address 2 Feb 24 02:44:49 nobilx kernel: [ 42.805615] usb 3-1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 43.047723] usb 3-2: new full speed USB device using uhci_hcd and address 3 Feb 24 02:44:49 nobilx kernel: [ 43.191616] usb 3-2: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 43.194563] hub 3-2:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 43.196539] hub 3-2:1.0: 4 ports detected Feb 24 02:44:49 nobilx kernel: [ 43.299733] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 24 02:44:49 nobilx kernel: [ 43.299737] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 24 02:44:49 nobilx kernel: [ 43.299741] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 24 02:44:49 nobilx kernel: [ 43.300448] scsi0 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.300660] scsi1 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.300779] scsi2 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.300896] scsi3 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.301016] scsi4 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.301142] scsi5 : ahci Feb 24 02:44:49 nobilx kernel: [ 43.301226] ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.301229] ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.301231] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.301233] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.301236] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.301238] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 Feb 24 02:44:49 nobilx kernel: [ 43.529542] usb 3-2.1: new full speed USB device using uhci_hcd and address 4 Feb 24 02:44:49 nobilx kernel: [ 43.775684] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 43.782537] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-16, max UDMA/100 Feb 24 02:44:49 nobilx kernel: [ 43.782541] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 02:44:49 nobilx kernel: [ 43.789469] ata1.00: configured for UDMA/100 Feb 24 02:44:49 nobilx kernel: [ 43.856623] usb 3-2.1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 44.081544] usb 3-2.3: new low speed USB device using uhci_hcd and address 5 Feb 24 02:44:49 nobilx kernel: [ 44.236623] usb 3-2.3: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 44.241562] usbcore: registered new interface driver libusual Feb 24 02:44:49 nobilx kernel: [ 44.241635] usbcore: registered new interface driver hiddev Feb 24 02:44:49 nobilx kernel: [ 44.243757] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input1 Feb 24 02:44:49 nobilx kernel: [ 44.244646] Initializing USB Mass Storage driver... Feb 24 02:44:49 nobilx kernel: [ 44.245225] scsi6 : SCSI emulation for USB Mass Storage devices Feb 24 02:44:49 nobilx kernel: [ 44.245725] usb-storage: device found at 2 Feb 24 02:44:49 nobilx kernel: [ 44.245727] usb-storage: waiting for device to settle before scanning Feb 24 02:44:49 nobilx kernel: [ 44.264145] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 44.264210] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 02:44:49 nobilx kernel: [ 44.267541] Fixing up Logitech keyboard report descriptor Feb 24 02:44:49 nobilx kernel: [ 44.268148] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input2 Feb 24 02:44:49 nobilx kernel: [ 44.284651] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 Feb 24 02:44:49 nobilx kernel: [ 44.284655] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 02:44:49 nobilx kernel: [ 44.286604] ata2.00: configured for UDMA/133 Feb 24 02:44:49 nobilx kernel: [ 44.292205] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 02:44:49 nobilx kernel: [ 44.304752] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input3 Feb 24 02:44:49 nobilx kernel: [ 44.315677] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2.3 Feb 24 02:44:49 nobilx kernel: [ 44.315700] usbcore: registered new interface driver usbhid Feb 24 02:44:49 nobilx kernel: [ 44.315704] usbcore: registered new interface driver usb-storage Feb 24 02:44:49 nobilx kernel: [ 44.315706] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 24 02:44:49 nobilx kernel: [ 44.315710] USB Mass Storage support registered. Feb 24 02:44:49 nobilx kernel: [ 44.595647] ata3: SATA link down (SStatus 0 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 44.908126] ata4: SATA link down (SStatus 0 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 45.219599] ata5: SATA link down (SStatus 0 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 45.696071] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 45.854677] ata6.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 24 02:44:49 nobilx kernel: [ 45.854681] ata6.00: applying bridge limits Feb 24 02:44:49 nobilx kernel: [ 46.010555] ata6.00: configured for UDMA/33 Feb 24 02:44:49 nobilx kernel: [ 46.010653] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5 Feb 24 02:44:49 nobilx kernel: [ 46.010775] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 Feb 24 02:44:49 nobilx kernel: [ 46.011667] scsi 5:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 24 02:44:49 nobilx kernel: [ 46.011753] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 47.015519] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Feb 24 02:44:49 nobilx kernel: [ 47.015523] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Feb 24 02:44:49 nobilx kernel: [ 47.015529] PCI: Setting latency timer of device 0000:03:00.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 47.015635] scsi7 : ahci Feb 24 02:44:49 nobilx kernel: [ 47.015690] scsi8 : ahci Feb 24 02:44:49 nobilx kernel: [ 47.015757] ata7: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 Feb 24 02:44:49 nobilx kernel: [ 47.015761] ata8: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 Feb 24 02:44:49 nobilx kernel: [ 47.335489] ata7: SATA link down (SStatus 0 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 47.655470] ata8: SATA link down (SStatus 0 SControl 300) Feb 24 02:44:49 nobilx kernel: [ 47.655542] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 02:44:49 nobilx kernel: [ 47.655577] PCI: Setting latency timer of device 0000:03:00.1 to 64 Feb 24 02:44:49 nobilx kernel: [ 47.655624] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 02:44:49 nobilx kernel: [ 47.656542] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 24 02:44:49 nobilx kernel: [ 47.656547] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 47.656592] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 Feb 24 02:44:49 nobilx kernel: [ 47.660489] ehci_hcd 0000:00:1a.7: debug port 1 Feb 24 02:44:49 nobilx kernel: [ 47.660495] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 24 02:44:49 nobilx kernel: [ 47.660500] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 24 02:44:49 nobilx kernel: [ 47.664397] scsi9 : pata_jmicron Feb 24 02:44:49 nobilx kernel: [ 47.664419] Driver 'sd' needs updating - please use bus_type methods Feb 24 02:44:49 nobilx kernel: [ 47.664498] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 02:44:49 nobilx kernel: [ 47.664507] sd 0:0:0:0: [sda] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 47.664509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 47.664523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 47.664559] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) Feb 24 02:44:49 nobilx kernel: [ 47.664567] sd 0:0:0:0: [sda] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 47.664569] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 47.664581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 47.664584] sda:<6>scsi10 : pata_jmicron Feb 24 02:44:49 nobilx kernel: [ 47.665525] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 Feb 24 02:44:49 nobilx kernel: [ 47.665527] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 Feb 24 02:44:49 nobilx kernel: [ 47.670588] Driver 'sr' needs updating - please use bus_type methods Feb 24 02:44:49 nobilx kernel: [ 47.675977] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 02:44:49 nobilx kernel: [ 47.676084] usb usb6: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 47.676109] hub 6-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 47.676117] hub 6-0:1.0: 4 ports detected Feb 24 02:44:49 nobilx kernel: [ 47.828075] ata9.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100 Feb 24 02:44:49 nobilx kernel: [ 47.828078] ata9.00: 488397168 sectors, multi 0: LBA48 Feb 24 02:44:49 nobilx kernel: [ 47.868087] ata9.00: configured for UDMA/100 Feb 24 02:44:49 nobilx kernel: [ 48.019437] usb 6-3: new high speed USB device using ehci_hcd and address 2 Feb 24 02:44:49 nobilx kernel: [ 48.034939] scsi 9:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 Feb 24 02:44:49 nobilx kernel: [ 48.035218] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 02:44:49 nobilx kernel: [ 48.036026] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 24 02:44:49 nobilx kernel: [ 48.036031] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 24 02:44:49 nobilx kernel: [ 48.036073] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 Feb 24 02:44:49 nobilx kernel: [ 48.039987] ehci_hcd 0000:00:1d.7: debug port 1 Feb 24 02:44:49 nobilx kernel: [ 48.039992] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 24 02:44:49 nobilx kernel: [ 48.039997] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 24 02:44:49 nobilx kernel: [ 48.143427] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 02:44:49 nobilx kernel: [ 48.143542] usb usb7: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 48.143566] hub 7-0:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 48.143572] hub 7-0:1.0: 6 ports detected Feb 24 02:44:49 nobilx kernel: [ 48.153739] usb 6-3: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 48.154162] scsi11 : SCSI emulation for USB Mass Storage devices Feb 24 02:44:49 nobilx kernel: [ 48.154296] usb-storage: device found at 2 Feb 24 02:44:49 nobilx kernel: [ 48.154298] usb-storage: waiting for device to settle before scanning Feb 24 02:44:49 nobilx kernel: [ 48.154358] usb 2-1: USB disconnect, address 2 Feb 24 02:44:49 nobilx kernel: [ 48.244834] sda1 sda2 sda3 sda4 Feb 24 02:44:49 nobilx kernel: [ 48.244933] sd 0:0:0:0: [sda] Attached SCSI disk Feb 24 02:44:49 nobilx kernel: [ 48.244992] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 02:44:49 nobilx kernel: [ 48.245005] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 48.245007] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 48.245026] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 48.245072] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Feb 24 02:44:49 nobilx kernel: [ 48.245081] sd 1:0:0:0: [sdb] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 48.245083] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 48.245096] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 48.245098] sdb:<6>ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 Feb 24 02:44:49 nobilx kernel: [ 48.305798] sdb1 sdb2 sdb3 Feb 24 02:44:49 nobilx kernel: [ 48.305860] sd 1:0:0:0: [sdb] Attached SCSI disk Feb 24 02:44:49 nobilx kernel: [ 48.305973] sd 9:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Feb 24 02:44:49 nobilx kernel: [ 48.305982] sd 9:0:0:0: [sdc] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 48.305984] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 48.305997] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 48.306028] sd 9:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Feb 24 02:44:49 nobilx kernel: [ 48.306035] sd 9:0:0:0: [sdc] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 48.306037] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 02:44:49 nobilx kernel: [ 48.306050] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 02:44:49 nobilx kernel: [ 48.306053] sdc: Feb 24 02:44:49 nobilx kernel: [ 48.311591] sd 9:0:0:0: [sdc] Attached SCSI disk Feb 24 02:44:49 nobilx kernel: [ 48.314601] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 24 02:44:49 nobilx kernel: [ 48.314604] Uniform CD-ROM driver Revision: 3.20 Feb 24 02:44:49 nobilx kernel: [ 48.314635] sr 5:0:0:0: Attached scsi CD-ROM sr0 Feb 24 02:44:49 nobilx kernel: [ 48.321819] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 24 02:44:49 nobilx kernel: [ 48.321883] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 24 02:44:49 nobilx kernel: [ 48.321898] sd 1:0:0:0: Attached scsi generic sg1 type 0 Feb 24 02:44:49 nobilx kernel: [ 48.321911] sr 5:0:0:0: Attached scsi generic sg2 type 5 Feb 24 02:44:49 nobilx kernel: [ 48.321925] sd 9:0:0:0: Attached scsi generic sg3 type 0 Feb 24 02:44:49 nobilx kernel: [ 48.634006] EXT3-fs: INFO: recovery required on readonly filesystem. Feb 24 02:44:49 nobilx kernel: [ 48.634009] EXT3-fs: write access will be enabled during recovery. Feb 24 02:44:49 nobilx kernel: [ 48.759396] usb 7-2: new high speed USB device using ehci_hcd and address 3 Feb 24 02:44:49 nobilx kernel: [ 48.891761] usb 7-2: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 48.891821] hub 7-2:1.0: USB hub found Feb 24 02:44:49 nobilx kernel: [ 48.891941] hub 7-2:1.0: 4 ports detected Feb 24 02:44:49 nobilx kernel: [ 48.995481] usb 3-1: USB disconnect, address 2 Feb 24 02:44:49 nobilx kernel: [ 49.267548] usb 3-1: new full speed USB device using uhci_hcd and address 6 Feb 24 02:44:49 nobilx kernel: [ 49.453621] usb 3-1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 49.459741] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input4 Feb 24 02:44:49 nobilx kernel: [ 49.491405] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 02:44:49 nobilx kernel: [ 49.494541] Fixing up Logitech keyboard report descriptor Feb 24 02:44:49 nobilx kernel: [ 49.495080] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input5 Feb 24 02:44:49 nobilx kernel: [ 49.539455] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 02:44:49 nobilx kernel: [ 49.539519] usb 3-2: USB disconnect, address 3 Feb 24 02:44:49 nobilx kernel: [ 49.539521] usb 3-2.1: USB disconnect, address 4 Feb 24 02:44:49 nobilx kernel: [ 49.539753] usb 3-2.3: USB disconnect, address 5 Feb 24 02:44:49 nobilx kernel: [ 49.615452] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 24 02:44:49 nobilx kernel: [ 49.895425] usb 7-2.1: new full speed USB device using ehci_hcd and address 4 Feb 24 02:44:49 nobilx kernel: [ 50.207510] usb 7-2.1: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 50.423424] usb 7-2.3: new low speed USB device using ehci_hcd and address 5 Feb 24 02:44:49 nobilx kernel: [ 50.536889] usb 7-2.3: configuration #1 chosen from 1 choice Feb 24 02:44:49 nobilx kernel: [ 50.539726] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.3/7-2.3:1.0/input/input6 Feb 24 02:44:49 nobilx kernel: [ 50.563369] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 24 02:44:49 nobilx kernel: [ 53.152449] usb-storage: device scan complete Feb 24 02:44:49 nobilx kernel: [ 53.153058] scsi 11:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 24 02:44:49 nobilx kernel: [ 53.153561] scsi 11:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 24 02:44:49 nobilx kernel: [ 53.154060] scsi 11:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 24 02:44:49 nobilx kernel: [ 53.154560] scsi 11:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 24 02:44:49 nobilx kernel: [ 53.155588] sd 11:0:0:0: [sdd] Attached SCSI removable disk Feb 24 02:44:49 nobilx kernel: [ 53.155617] sd 11:0:0:0: Attached scsi generic sg4 type 0 Feb 24 02:44:49 nobilx kernel: [ 53.329676] sd 11:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 02:44:49 nobilx kernel: [ 53.330676] sd 11:0:0:1: [sde] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 53.330679] sd 11:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 02:44:49 nobilx kernel: [ 53.330681] sd 11:0:0:1: [sde] Assuming drive cache: write through Feb 24 02:44:49 nobilx kernel: [ 53.332674] sd 11:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 02:44:49 nobilx kernel: [ 53.333678] sd 11:0:0:1: [sde] Write Protect is off Feb 24 02:44:49 nobilx kernel: [ 53.333680] sd 11:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 02:44:49 nobilx kernel: [ 53.333681] sd 11:0:0:1: [sde] Assuming drive cache: write through Feb 24 02:44:49 nobilx kernel: [ 53.333733] sde: unknown partition table Feb 24 02:44:49 nobilx kernel: [ 53.340968] sd 11:0:0:1: [sde] Attached SCSI removable disk Feb 24 02:44:49 nobilx kernel: [ 53.341006] sd 11:0:0:1: Attached scsi generic sg5 type 0 Feb 24 02:44:49 nobilx kernel: [ 53.342211] sd 11:0:0:2: [sdf] Attached SCSI removable disk Feb 24 02:44:49 nobilx kernel: [ 53.342243] sd 11:0:0:2: Attached scsi generic sg6 type 0 Feb 24 02:44:49 nobilx kernel: [ 53.343199] sd 11:0:0:3: [sdg] Attached SCSI removable disk Feb 24 02:44:49 nobilx kernel: [ 53.343223] sd 11:0:0:3: Attached scsi generic sg7 type 0 Feb 24 02:44:49 nobilx kernel: [ 54.856882] kjournald starting. Commit interval 5 seconds Feb 24 02:44:49 nobilx kernel: [ 54.856901] EXT3-fs: sda4: orphan cleanup on readonly fs Feb 24 02:44:49 nobilx kernel: [ 54.856907] ext3_orphan_cleanup: deleting unreferenced inode 1081410 Feb 24 02:44:49 nobilx kernel: [ 54.856931] ext3_orphan_cleanup: deleting unreferenced inode 6832180 Feb 24 02:44:49 nobilx kernel: [ 54.881487] ext3_orphan_cleanup: deleting unreferenced inode 4424233 Feb 24 02:44:49 nobilx kernel: [ 54.896640] ext3_orphan_cleanup: deleting unreferenced inode 4424239 Feb 24 02:44:49 nobilx kernel: [ 54.930051] ext3_orphan_cleanup: deleting unreferenced inode 4424236 Feb 24 02:44:49 nobilx kernel: [ 54.930063] ext3_orphan_cleanup: deleting unreferenced inode 4424230 Feb 24 02:44:49 nobilx kernel: [ 54.947845] ext3_orphan_cleanup: deleting unreferenced inode 1081358 Feb 24 02:44:49 nobilx kernel: [ 54.966380] ext3_orphan_cleanup: deleting unreferenced inode 8241153 Feb 24 02:44:49 nobilx kernel: [ 55.026299] ext3_orphan_cleanup: deleting unreferenced inode 4429269 Feb 24 02:44:49 nobilx kernel: [ 55.060511] ext3_orphan_cleanup: deleting unreferenced inode 5144815 Feb 24 02:44:49 nobilx kernel: [ 55.072590] ext3_orphan_cleanup: deleting unreferenced inode 4358184 Feb 24 02:44:49 nobilx kernel: [ 55.137453] ext3_orphan_cleanup: deleting unreferenced inode 1081386 Feb 24 02:44:49 nobilx kernel: [ 55.137460] ext3_orphan_cleanup: deleting unreferenced inode 5144823 Feb 24 02:44:49 nobilx kernel: [ 55.137469] EXT3-fs: sda4: 13 orphan inodes deleted Feb 24 02:44:49 nobilx kernel: [ 55.137470] EXT3-fs: recovery complete. Feb 24 02:44:49 nobilx kernel: [ 55.188055] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 02:44:49 nobilx kernel: [ 61.639220] input: PC Speaker as /devices/platform/pcspkr/input/input7 Feb 24 02:44:49 nobilx kernel: [ 61.683610] iTCO_vendor_support: vendor-support=0 Feb 24 02:44:49 nobilx kernel: [ 61.730681] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 24 02:44:49 nobilx kernel: [ 61.730748] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 24 02:44:49 nobilx kernel: [ 61.730779] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 24 02:44:49 nobilx kernel: [ 61.786678] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 24 02:44:49 nobilx kernel: [ 61.797533] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 24 02:44:49 nobilx kernel: [ 61.870740] input: Power Button (FF) as /devices/virtual/input/input8 Feb 24 02:44:49 nobilx kernel: [ 61.974649] ACPI: Power Button (FF) [PWRF] Feb 24 02:44:49 nobilx kernel: [ 61.974727] input: Power Button (CM) as /devices/virtual/input/input9 Feb 24 02:44:49 nobilx kernel: [ 62.038641] ACPI: Power Button (CM) [PWRB] Feb 24 02:44:49 nobilx kernel: [ 62.415165] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 24 02:44:49 nobilx kernel: [ 62.415176] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 62.415978] sky2 0000:02:00.0: v1.20 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 24 02:44:49 nobilx kernel: [ 62.416303] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 24 02:44:49 nobilx kernel: [ 62.529778] nvidia: module license 'NVIDIA' taints kernel. Feb 24 02:44:49 nobilx kernel: [ 62.845658] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 02:44:49 nobilx kernel: [ 62.845666] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 62.845731] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 24 02:44:49 nobilx kernel: [ 62.922654] Bluetooth: Core ver 2.11 Feb 24 02:44:49 nobilx kernel: [ 62.922704] NET: Registered protocol family 31 Feb 24 02:44:49 nobilx kernel: [ 62.922705] Bluetooth: HCI device and connection manager initialized Feb 24 02:44:49 nobilx kernel: [ 62.922712] Bluetooth: HCI socket layer initialized Feb 24 02:44:49 nobilx kernel: [ 62.971960] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 24 02:44:49 nobilx kernel: [ 62.972791] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 24 02:44:49 nobilx kernel: [ 62.990623] Bluetooth: HCI USB driver ver 2.9 Feb 24 02:44:49 nobilx kernel: [ 62.991342] usbcore: registered new interface driver hci_usb Feb 24 02:44:49 nobilx kernel: [ 63.433083] sky2 eth0: enabling interface Feb 24 02:44:49 nobilx kernel: [ 63.821226] lp: driver loaded but no devices found Feb 24 02:44:49 nobilx kernel: [ 64.733596] NET: Registered protocol family 10 Feb 24 02:44:49 nobilx kernel: [ 64.733788] lo: Disabled Privacy Extensions Feb 24 02:44:49 nobilx kernel: [ 64.734045] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 24 02:44:49 nobilx kernel: [ 64.823132] EXT3 FS on sda4, internal journal Feb 24 02:44:49 nobilx kernel: [ 64.949899] device-mapper: uevent: version 1.0.3 Feb 24 02:44:49 nobilx kernel: [ 64.949923] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 24 02:44:49 nobilx kernel: [ 65.713645] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 24 02:44:49 nobilx kernel: [ 65.795422] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 24 02:44:49 nobilx kernel: [ 65.800254] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 24 02:44:49 nobilx kernel: [ 66.196865] No dock devices found. Feb 24 02:44:49 nobilx kernel: [ 66.307547] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 02:44:50 nobilx kernel: [ 68.085086] ppdev: user-space parallel port driver Feb 24 02:44:51 nobilx kernel: [ 69.011291] audit(1203817491.172:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5933 profile="/usr/sbin/cupsd" namespace="default" Feb 24 02:44:55 nobilx kernel: [ 73.732290] Bluetooth: L2CAP ver 2.9 Feb 24 02:44:55 nobilx kernel: [ 73.732294] Bluetooth: L2CAP socket layer initialized Feb 24 02:44:56 nobilx kernel: [ 73.839042] Bluetooth: RFCOMM socket layer initialized Feb 24 02:44:56 nobilx kernel: [ 73.839054] Bluetooth: RFCOMM TTY layer initialized Feb 24 02:44:56 nobilx kernel: [ 73.839056] Bluetooth: RFCOMM ver 1.8 Feb 24 02:44:58 nobilx kernel: [ 75.853812] eth0: no IPv6 routers present Feb 24 16:18:19 nobilx kernel: Inspecting /boot/System.map-2.6.24-8-generic Feb 24 16:18:19 nobilx kernel: Loaded 28287 symbols from /boot/System.map-2.6.24-8-generic. Feb 24 16:18:19 nobilx kernel: Symbols match kernel version 2.6.24. Feb 24 16:18:19 nobilx kernel: Loaded 35319 symbols from 84 modules. Feb 24 16:18:19 nobilx kernel: [ 0.000000] Linux version 2.6.24-8-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-1ubuntu2)) #1 SMP Thu Feb 14 20:13:27 UTC 2008 (Ubuntu 2.6.24-8.14-generic) Feb 24 16:18:19 nobilx kernel: [ 0.000000] Command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-provided physical RAM map: Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Feb 24 16:18:19 nobilx kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000180000000 (usable) Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] end_pfn_map = 1572864 Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMI 2.4 present. Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FAE70 checksum 0 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: RSDP 000FAE70, 0024 (r2 ACPIAM) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: XSDT 7FF90100, 004C (r1 MSTEST OEMXSDT 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: FACP 7FF90290, 00F4 (r3 MSTEST OEMFACP 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: DSDT 7FF905C0, 918E (r1 A0483 A0483035 35 INTL 20060113) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: FACS 7FF9E000, 0040 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: APIC 7FF90390, 006C (r1 MSTEST OEMAPIC 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: MCFG 7FF90400, 003C (r1 MSTEST OEMMCFG 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: OEMB 7FF9E040, 007B (r1 MSTEST AMI_OEM 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: HPET 7FF99750, 0038 (r1 MSTEST OEMHPET 11000723 MSFT 97) Feb 24 16:18:19 nobilx kernel: [ 0.000000] No NUMA configuration found Feb 24 16:18:19 nobilx kernel: [ 0.000000] Faking a node at 0000000000000000-0000000180000000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 256, 524176) 1 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used Feb 24 16:18:19 nobilx kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Zone PFN ranges: Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA 0 -> 4096 Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA32 4096 -> 1048576 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Normal 1048576 -> 1572864 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Movable zone start PFN for each node Feb 24 16:18:19 nobilx kernel: [ 0.000000] early_node_map[3] active PFN ranges Feb 24 16:18:19 nobilx kernel: [ 0.000000] 0: 0 -> 158 Feb 24 16:18:19 nobilx kernel: [ 0.000000] 0: 256 -> 524176 Feb 24 16:18:19 nobilx kernel: [ 0.000000] 0: 1048576 -> 1572864 Feb 24 16:18:19 nobilx kernel: [ 0.000000] On node 0 totalpages: 1048366 Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA zone: 56 pages used for memmap Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA zone: 1209 pages reserved Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA zone: 2733 pages, LIFO batch:0 Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap Feb 24 16:18:19 nobilx kernel: [ 0.000000] DMA32 zone: 505800 pages, LIFO batch:31 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Normal zone: 7168 pages used for memmap Feb 24 16:18:19 nobilx kernel: [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Movable zone: 0 pages used for memmap Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Feb 24 16:18:19 nobilx kernel: [ 0.000000] Processor #0 (Bootup-CPU) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Feb 24 16:18:19 nobilx kernel: [ 0.000000] Processor #1 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Feb 24 16:18:19 nobilx kernel: [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: IRQ0 used by override. Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: IRQ2 used by override. Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: IRQ9 used by override. Feb 24 16:18:19 nobilx kernel: [ 0.000000] Setting APIC routing to flat Feb 24 16:18:19 nobilx kernel: [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff90000 - 000000007ff9e000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ff9e000 - 000000007ffe0000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000007ffe0000 - 0000000080000000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 0000000080000000 - 00000000fee00000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) Feb 24 16:18:19 nobilx kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Feb 24 16:18:19 nobilx kernel: [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data Feb 24 16:18:19 nobilx kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025653 Feb 24 16:18:19 nobilx kernel: [ 0.000000] Policy zone: Normal Feb 24 16:18:19 nobilx kernel: [ 0.000000] Kernel command line: root=UUID=cd2edd2f-c258-4b93-b2a1-7dfc4e7e5fec ro quiet splash locale=de_DE Feb 24 16:18:19 nobilx kernel: [ 0.000000] Initializing CPU#0 Feb 24 16:18:19 nobilx kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Feb 24 16:18:19 nobilx kernel: [ 0.000000] Extended CMOS year: 2000 Feb 24 16:18:19 nobilx kernel: [ 0.000000] hpet clockevent registered Feb 24 16:18:19 nobilx kernel: [ 0.000000] TSC calibrated against HPET Feb 24 16:18:19 nobilx kernel: [ 33.270178] time.c: Detected 2133.332 MHz processor. Feb 24 16:18:19 nobilx kernel: [ 33.271220] Console: colour VGA+ 80x25 Feb 24 16:18:19 nobilx kernel: [ 33.271223] console [tty0] enabled Feb 24 16:18:19 nobilx kernel: [ 33.271239] Checking aperture... Feb 24 16:18:19 nobilx kernel: [ 33.271246] Calgary: detecting Calgary via BIOS EBDA area Feb 24 16:18:19 nobilx kernel: [ 33.271247] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Feb 24 16:18:19 nobilx kernel: [ 33.271249] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Feb 24 16:18:19 nobilx kernel: [ 33.309791] Placing software IO TLB between 0x1053000 - 0x5053000 Feb 24 16:18:19 nobilx kernel: [ 33.347489] Memory: 4028460k/6291456k available (2460k kernel code, 165004k reserved, 1302k data, 316k init) Feb 24 16:18:19 nobilx kernel: [ 33.347519] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Feb 24 16:18:19 nobilx kernel: [ 33.424167] Calibrating delay using timer specific routine.. 4269.68 BogoMIPS (lpj=8539360) Feb 24 16:18:19 nobilx kernel: [ 33.424198] Security Framework initialized Feb 24 16:18:19 nobilx kernel: [ 33.424203] SELinux: Disabled at boot. Feb 24 16:18:19 nobilx kernel: [ 33.424213] AppArmor: AppArmor initialized Feb 24 16:18:19 nobilx kernel: [ 33.424217] Failure registering capabilities with primary security module. Feb 24 16:18:19 nobilx kernel: [ 33.424610] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Feb 24 16:18:19 nobilx kernel: [ 33.427873] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Feb 24 16:18:19 nobilx kernel: [ 33.429116] Mount-cache hash table entries: 256 Feb 24 16:18:19 nobilx kernel: [ 33.429245] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 16:18:19 nobilx kernel: [ 33.429247] CPU: L3 cache: 4096K Feb 24 16:18:19 nobilx kernel: [ 33.429249] CPU 0/0 -> Node 0 Feb 24 16:18:19 nobilx kernel: [ 33.429250] using mwait in idle threads. Feb 24 16:18:19 nobilx kernel: [ 33.429252] CPU: Physical Processor ID: 0 Feb 24 16:18:19 nobilx kernel: [ 33.429253] CPU: Processor Core ID: 0 Feb 24 16:18:19 nobilx kernel: [ 33.429259] CPU0: Thermal monitoring enabled (TM2) Feb 24 16:18:19 nobilx kernel: [ 33.429270] SMP alternatives: switching to UP code Feb 24 16:18:19 nobilx kernel: [ 33.429945] Early unpacking initramfs... done Feb 24 16:18:19 nobilx kernel: [ 33.759630] ACPI: Core revision 20070126 Feb 24 16:18:19 nobilx kernel: [ 33.759677] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. Feb 24 16:18:19 nobilx kernel: [ 33.834673] Using local APIC timer interrupts. Feb 24 16:18:19 nobilx kernel: [ 33.881553] APIC timer calibration result 16666653 Feb 24 16:18:19 nobilx kernel: [ 33.881555] Detected 16.666 MHz APIC timer. Feb 24 16:18:19 nobilx kernel: [ 33.881625] SMP alternatives: switching to SMP code Feb 24 16:18:19 nobilx kernel: [ 33.882229] Booting processor 1/2 APIC 0x1 Feb 24 16:18:19 nobilx kernel: [ 33.892624] Initializing CPU#1 Feb 24 16:18:19 nobilx kernel: [ 33.985557] Calibrating delay using timer specific routine.. 4266.69 BogoMIPS (lpj=8533387) Feb 24 16:18:19 nobilx kernel: [ 33.985564] CPU: L1 I cache: 32K, L1 D cache: 32K Feb 24 16:18:19 nobilx kernel: [ 33.985565] CPU: L3 cache: 4096K Feb 24 16:18:19 nobilx kernel: [ 33.985567] CPU 1/1 -> Node 0 Feb 24 16:18:19 nobilx kernel: [ 33.985568] CPU: Physical Processor ID: 0 Feb 24 16:18:19 nobilx kernel: [ 33.985569] CPU: Processor Core ID: 0 Feb 24 16:18:19 nobilx kernel: [ 33.985574] CPU1: Thermal monitoring enabled (TM2) Feb 24 16:18:19 nobilx kernel: [ 33.986036] Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06 Feb 24 16:18:19 nobilx kernel: [ 33.986042] checking TSC synchronization [CPU#0 -> CPU#1]: passed. Feb 24 16:18:19 nobilx kernel: [ 34.006064] Brought up 2 CPUs Feb 24 16:18:19 nobilx kernel: [ 34.006130] CPU0 attaching sched-domain: Feb 24 16:18:19 nobilx kernel: [ 34.006132] domain 0: span 03 Feb 24 16:18:19 nobilx kernel: [ 34.006133] groups: 01 02 Feb 24 16:18:19 nobilx kernel: [ 34.006136] domain 1: span 03 Feb 24 16:18:19 nobilx kernel: [ 34.006137] groups: 03 Feb 24 16:18:19 nobilx kernel: [ 34.006138] CPU1 attaching sched-domain: Feb 24 16:18:19 nobilx kernel: [ 34.006140] domain 0: span 03 Feb 24 16:18:19 nobilx kernel: [ 34.006141] groups: 02 01 Feb 24 16:18:19 nobilx kernel: [ 34.006143] domain 1: span 03 Feb 24 16:18:19 nobilx kernel: [ 34.006144] groups: 03 Feb 24 16:18:19 nobilx kernel: [ 34.006327] net_namespace: 120 bytes Feb 24 16:18:19 nobilx kernel: [ 34.006655] Time: 15:17:56 Date: 02/24/08 Feb 24 16:18:19 nobilx kernel: [ 34.006698] NET: Registered protocol family 16 Feb 24 16:18:19 nobilx kernel: [ 34.006860] ACPI: bus type pci registered Feb 24 16:18:19 nobilx kernel: [ 34.006923] PCI: Using configuration type 1 Feb 24 16:18:19 nobilx kernel: [ 34.009811] ACPI: EC: Look up EC in DSDT Feb 24 16:18:19 nobilx kernel: [ 34.016608] ACPI: Interpreter enabled Feb 24 16:18:19 nobilx kernel: [ 34.016610] ACPI: (supports S0 S1 S3 S4 S5) Feb 24 16:18:19 nobilx kernel: [ 34.016623] ACPI: Using IOAPIC for interrupt routing Feb 24 16:18:19 nobilx kernel: [ 34.022419] ACPI: PCI Root Bridge [PCI0] (0000:00) Feb 24 16:18:19 nobilx kernel: [ 34.023000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO Feb 24 16:18:19 nobilx kernel: [ 34.023003] PCI quirk: region 0480-04bf claimed by ICH6 GPIO Feb 24 16:18:19 nobilx kernel: [ 34.023704] PCI: Transparent bridge - 0000:00:1e.0 Feb 24 16:18:19 nobilx kernel: [ 34.023732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.023885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.023966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.024089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.024173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.024256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] Feb 24 16:18:19 nobilx kernel: [ 34.026745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Feb 24 16:18:19 nobilx kernel: [ 34.026858] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Feb 24 16:18:19 nobilx kernel: [ 34.026968] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Feb 24 16:18:19 nobilx kernel: [ 34.027077] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) Feb 24 16:18:19 nobilx kernel: [ 34.027187] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Feb 24 16:18:19 nobilx kernel: [ 34.027297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) Feb 24 16:18:19 nobilx kernel: [ 34.027406] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) Feb 24 16:18:19 nobilx kernel: [ 34.027515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) Feb 24 16:18:19 nobilx kernel: [ 34.027626] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be E4 [20070126] Feb 24 16:18:19 nobilx kernel: [ 34.027631] Linux Plug and Play Support v0.97 (c) Adam Belay Feb 24 16:18:19 nobilx kernel: [ 34.027655] pnp: PnP ACPI init Feb 24 16:18:19 nobilx kernel: [ 34.027663] ACPI: bus type pnp registered Feb 24 16:18:19 nobilx kernel: [ 34.030038] pnp: PnP ACPI: found 13 devices Feb 24 16:18:19 nobilx kernel: [ 34.030040] ACPI: ACPI bus type pnp unregistered Feb 24 16:18:19 nobilx kernel: [ 34.030234] PCI: Using ACPI for IRQ routing Feb 24 16:18:19 nobilx kernel: [ 34.030236] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Feb 24 16:18:19 nobilx kernel: [ 34.045712] NET: Registered protocol family 8 Feb 24 16:18:19 nobilx kernel: [ 34.045714] NET: Registered protocol family 20 Feb 24 16:18:19 nobilx kernel: [ 34.045750] PCI-GART: No AMD northbridge found. Feb 24 16:18:19 nobilx kernel: [ 34.045755] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Feb 24 16:18:19 nobilx kernel: [ 34.045759] hpet0: 3 64-bit timers, 14318180 Hz Feb 24 16:18:19 nobilx kernel: [ 34.046786] AppArmor: AppArmor Filesystem Enabled Feb 24 16:18:19 nobilx kernel: [ 34.046796] ACPI: RTC can wake from S4 Feb 24 16:18:19 nobilx kernel: [ 34.049710] Time: tsc clocksource has been installed. Feb 24 16:18:19 nobilx kernel: [ 34.049719] Switched to high resolution mode on CPU 0 Feb 24 16:18:19 nobilx kernel: [ 34.050232] Switched to high resolution mode on CPU 1 Feb 24 16:18:19 nobilx kernel: [ 34.057732] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057740] system 00:07: ioport range 0x290-0x297 has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057746] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057749] system 00:08: ioport range 0x800-0x87f has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057751] system 00:08: ioport range 0x480-0x4bf has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057755] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057757] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057760] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057763] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057766] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057769] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057774] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057777] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057783] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057791] system 00:0c: iomem range 0x0-0x9ffff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057793] system 00:0c: iomem range 0xc0000-0xcffff has been reserved Feb 24 16:18:19 nobilx kernel: [ 34.057796] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057799] system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.057801] system 00:0c: iomem range 0x0-0x0 could not be reserved Feb 24 16:18:19 nobilx kernel: [ 34.058205] PCI: Bridge: 0000:00:01.0 Feb 24 16:18:19 nobilx kernel: [ 34.058207] IO window: a000-afff Feb 24 16:18:19 nobilx kernel: [ 34.058210] MEM window: fa700000-fe7fffff Feb 24 16:18:19 nobilx kernel: [ 34.058212] PREFETCH window: bfe00000-dfdfffff Feb 24 16:18:19 nobilx kernel: [ 34.058214] PCI: Bridge: 0000:00:1c.0 Feb 24 16:18:19 nobilx kernel: [ 34.058215] IO window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058218] MEM window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058221] PREFETCH window: dfe00000-dfefffff Feb 24 16:18:19 nobilx kernel: [ 34.058225] PCI: Bridge: 0000:00:1c.4 Feb 24 16:18:19 nobilx kernel: [ 34.058227] IO window: c000-cfff Feb 24 16:18:19 nobilx kernel: [ 34.058230] MEM window: fe900000-fe9fffff Feb 24 16:18:19 nobilx kernel: [ 34.058233] PREFETCH window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058236] PCI: Bridge: 0000:00:1c.5 Feb 24 16:18:19 nobilx kernel: [ 34.058238] IO window: b000-bfff Feb 24 16:18:19 nobilx kernel: [ 34.058241] MEM window: fe800000-fe8fffff Feb 24 16:18:19 nobilx kernel: [ 34.058244] PREFETCH window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058247] PCI: Bridge: 0000:00:1e.0 Feb 24 16:18:19 nobilx kernel: [ 34.058248] IO window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058251] MEM window: fea00000-feafffff Feb 24 16:18:19 nobilx kernel: [ 34.058254] PREFETCH window: disabled. Feb 24 16:18:19 nobilx kernel: [ 34.058266] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 34.058269] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.058283] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 34.058286] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.058300] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 34.058304] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.058317] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 16:18:19 nobilx kernel: [ 34.058321] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.058329] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.058336] NET: Registered protocol family 2 Feb 24 16:18:19 nobilx kernel: [ 34.093864] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Feb 24 16:18:19 nobilx kernel: [ 34.094930] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Feb 24 16:18:19 nobilx kernel: [ 34.098831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Feb 24 16:18:19 nobilx kernel: [ 34.099426] TCP: Hash tables configured (established 524288 bind 65536) Feb 24 16:18:19 nobilx kernel: [ 34.099428] TCP reno registered Feb 24 16:18:19 nobilx kernel: [ 34.109866] checking if image is initramfs... it is Feb 24 16:18:19 nobilx kernel: [ 34.760802] Freeing initrd memory: 7831k freed Feb 24 16:18:19 nobilx kernel: [ 34.764068] audit: initializing netlink socket (disabled) Feb 24 16:18:19 nobilx kernel: [ 34.764079] audit(1203866276.392:1): initialized Feb 24 16:18:19 nobilx kernel: [ 34.765924] VFS: Disk quotas dquot_6.5.1 Feb 24 16:18:19 nobilx kernel: [ 34.765984] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Feb 24 16:18:19 nobilx kernel: [ 34.766086] io scheduler noop registered Feb 24 16:18:19 nobilx kernel: [ 34.766088] io scheduler anticipatory registered Feb 24 16:18:19 nobilx kernel: [ 34.766090] io scheduler deadline registered Feb 24 16:18:19 nobilx kernel: [ 34.766179] io scheduler cfq registered (default) Feb 24 16:18:19 nobilx kernel: [ 34.996537] Boot video device is 0000:01:00.0 Feb 24 16:18:19 nobilx kernel: [ 34.996663] PCI: Setting latency timer of device 0000:00:01.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.996689] assign_interrupt_mode Found MSI capability Feb 24 16:18:19 nobilx kernel: [ 34.996710] Allocate Port Service[0000:00:01.0:pcie00] Feb 24 16:18:19 nobilx kernel: [ 34.996772] PCI: Setting latency timer of device 0000:00:1c.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.996804] assign_interrupt_mode Found MSI capability Feb 24 16:18:19 nobilx kernel: [ 34.996830] Allocate Port Service[0000:00:1c.0:pcie00] Feb 24 16:18:19 nobilx kernel: [ 34.996856] Allocate Port Service[0000:00:1c.0:pcie02] Feb 24 16:18:19 nobilx kernel: [ 34.996920] PCI: Setting latency timer of device 0000:00:1c.4 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.996952] assign_interrupt_mode Found MSI capability Feb 24 16:18:19 nobilx kernel: [ 34.996978] Allocate Port Service[0000:00:1c.4:pcie00] Feb 24 16:18:19 nobilx kernel: [ 34.997004] Allocate Port Service[0000:00:1c.4:pcie02] Feb 24 16:18:19 nobilx kernel: [ 34.997069] PCI: Setting latency timer of device 0000:00:1c.5 to 64 Feb 24 16:18:19 nobilx kernel: [ 34.997101] assign_interrupt_mode Found MSI capability Feb 24 16:18:19 nobilx kernel: [ 34.997127] Allocate Port Service[0000:00:1c.5:pcie00] Feb 24 16:18:19 nobilx kernel: [ 34.997153] Allocate Port Service[0000:00:1c.5:pcie02] Feb 24 16:18:19 nobilx kernel: [ 35.017440] Real Time Clock Driver v1.12ac Feb 24 16:18:19 nobilx kernel: [ 35.017587] hpet_resources: 0xfed00000 is busy Feb 24 16:18:19 nobilx kernel: [ 35.017623] Linux agpgart interface v0.102 Feb 24 16:18:19 nobilx kernel: [ 35.017625] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Feb 24 16:18:19 nobilx kernel: [ 35.017734] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 16:18:19 nobilx kernel: [ 35.018166] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Feb 24 16:18:19 nobilx kernel: [ 35.018780] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Feb 24 16:18:19 nobilx kernel: [ 35.018833] input: Macintosh mouse button emulation as /devices/virtual/input/input0 Feb 24 16:18:19 nobilx kernel: [ 35.018948] PNP: No PS/2 controller found. Probing ports directly. Feb 24 16:18:19 nobilx kernel: [ 35.021632] serio: i8042 KBD port at 0x60,0x64 irq 1 Feb 24 16:18:19 nobilx kernel: [ 35.021636] serio: i8042 AUX port at 0x60,0x64 irq 12 Feb 24 16:18:19 nobilx kernel: [ 35.037737] mice: PS/2 mouse device common for all mice Feb 24 16:18:19 nobilx kernel: [ 35.037779] cpuidle: using governor ladder Feb 24 16:18:19 nobilx kernel: [ 35.037781] cpuidle: using governor menu Feb 24 16:18:19 nobilx kernel: [ 35.037919] NET: Registered protocol family 1 Feb 24 16:18:19 nobilx kernel: [ 35.037961] registered taskstats version 1 Feb 24 16:18:19 nobilx kernel: [ 35.038046] Magic number: 12:89:286 Feb 24 16:18:19 nobilx kernel: [ 35.038053] hash matches device ttyz0 Feb 24 16:18:19 nobilx kernel: [ 35.038108] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Feb 24 16:18:19 nobilx kernel: [ 35.038115] Freeing unused kernel memory: 316k freed Feb 24 16:18:19 nobilx kernel: [ 36.191505] fuse init (API version 7.9) Feb 24 16:18:19 nobilx kernel: [ 36.199293] ACPI: SSDT 7FF9E0C0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) Feb 24 16:18:19 nobilx kernel: [ 36.199810] ACPI: SSDT 7FF9E290, 013A (r1 AMI CPU2PM 1 INTL 20060113) Feb 24 16:18:19 nobilx kernel: [ 36.200198] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 16:18:19 nobilx kernel: [ 36.200207] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] Feb 24 16:18:19 nobilx kernel: [ 36.400926] usbcore: registered new interface driver usbfs Feb 24 16:18:19 nobilx kernel: [ 36.400943] usbcore: registered new interface driver hub Feb 24 16:18:19 nobilx kernel: [ 36.401352] usbcore: registered new device driver usb Feb 24 16:18:19 nobilx kernel: [ 36.402410] USB Universal Host Controller Interface driver v3.0 Feb 24 16:18:19 nobilx kernel: [ 36.402448] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 36.402456] PCI: Setting latency timer of device 0000:00:1a.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.402459] uhci_hcd 0000:00:1a.0: UHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.402650] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Feb 24 16:18:19 nobilx kernel: [ 36.402674] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 Feb 24 16:18:19 nobilx kernel: [ 36.402775] usb usb1: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.402793] hub 1-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.402798] hub 1-0:1.0: 2 ports detected Feb 24 16:18:19 nobilx kernel: [ 36.448149] SCSI subsystem initialized Feb 24 16:18:19 nobilx kernel: [ 36.460743] libata version 3.00 loaded. Feb 24 16:18:19 nobilx kernel: [ 36.506154] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 16:18:19 nobilx kernel: [ 36.506164] PCI: Setting latency timer of device 0000:00:1a.1 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.506167] uhci_hcd 0000:00:1a.1: UHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.506185] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 Feb 24 16:18:19 nobilx kernel: [ 36.506209] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e080 Feb 24 16:18:19 nobilx kernel: [ 36.506292] usb usb2: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.506310] hub 2-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.506315] hub 2-0:1.0: 2 ports detected Feb 24 16:18:19 nobilx kernel: [ 36.610133] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 16:18:19 nobilx kernel: [ 36.610142] PCI: Setting latency timer of device 0000:00:1d.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.610145] uhci_hcd 0000:00:1d.0: UHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.610163] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 Feb 24 16:18:19 nobilx kernel: [ 36.610186] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d800 Feb 24 16:18:19 nobilx kernel: [ 36.610268] usb usb3: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.610287] hub 3-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.610292] hub 3-0:1.0: 2 ports detected Feb 24 16:18:19 nobilx kernel: [ 36.714141] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 16:18:19 nobilx kernel: [ 36.714149] PCI: Setting latency timer of device 0000:00:1d.1 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.714152] uhci_hcd 0000:00:1d.1: UHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.714169] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 Feb 24 16:18:19 nobilx kernel: [ 36.714192] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 Feb 24 16:18:19 nobilx kernel: [ 36.714275] usb usb4: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.714293] hub 4-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.714297] hub 4-0:1.0: 2 ports detected Feb 24 16:18:19 nobilx kernel: [ 36.818149] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 16:18:19 nobilx kernel: [ 36.818156] PCI: Setting latency timer of device 0000:00:1d.2 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.818159] uhci_hcd 0000:00:1d.2: UHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.818177] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 Feb 24 16:18:19 nobilx kernel: [ 36.818200] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00 Feb 24 16:18:19 nobilx kernel: [ 36.818283] usb usb5: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.818301] hub 5-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.818306] hub 5-0:1.0: 2 ports detected Feb 24 16:18:19 nobilx kernel: [ 36.849588] usb 2-1: new full speed USB device using uhci_hcd and address 2 Feb 24 16:18:19 nobilx kernel: [ 36.922240] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 Feb 24 16:18:19 nobilx kernel: [ 36.923288] PCI: Setting latency timer of device 0000:00:1a.7 to 64 Feb 24 16:18:19 nobilx kernel: [ 36.923293] ehci_hcd 0000:00:1a.7: EHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 36.923331] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 Feb 24 16:18:19 nobilx kernel: [ 36.927244] ehci_hcd 0000:00:1a.7: debug port 1 Feb 24 16:18:19 nobilx kernel: [ 36.927249] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 Feb 24 16:18:19 nobilx kernel: [ 36.927255] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 Feb 24 16:18:19 nobilx kernel: [ 36.974093] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 16:18:19 nobilx kernel: [ 36.974206] usb usb6: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 36.974234] hub 6-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 36.974241] hub 6-0:1.0: 4 ports detected Feb 24 16:18:19 nobilx kernel: [ 37.077680] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Feb 24 16:18:19 nobilx kernel: [ 37.078614] PCI: Setting latency timer of device 0000:00:1d.7 to 64 Feb 24 16:18:19 nobilx kernel: [ 37.078619] ehci_hcd 0000:00:1d.7: EHCI Host Controller Feb 24 16:18:19 nobilx kernel: [ 37.078662] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 Feb 24 16:18:19 nobilx kernel: [ 37.082582] ehci_hcd 0000:00:1d.7: debug port 1 Feb 24 16:18:19 nobilx kernel: [ 37.082587] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Feb 24 16:18:19 nobilx kernel: [ 37.082592] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 Feb 24 16:18:19 nobilx kernel: [ 37.098048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Feb 24 16:18:19 nobilx kernel: [ 37.098149] usb usb7: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 37.098173] hub 7-0:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 37.098179] hub 7-0:1.0: 6 ports detected Feb 24 16:18:19 nobilx kernel: [ 37.201743] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17 Feb 24 16:18:19 nobilx kernel: [ 37.201774] PCI: Setting latency timer of device 0000:03:00.1 to 64 Feb 24 16:18:19 nobilx kernel: [ 37.202315] scsi0 : pata_jmicron Feb 24 16:18:19 nobilx kernel: [ 37.202689] scsi1 : pata_jmicron Feb 24 16:18:19 nobilx kernel: [ 37.203245] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 Feb 24 16:18:19 nobilx kernel: [ 37.203247] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 Feb 24 16:18:19 nobilx kernel: [ 37.366164] ata1.00: ATA-7: SAMSUNG SP2514N, VF100-41, max UDMA/100 Feb 24 16:18:19 nobilx kernel: [ 37.366167] ata1.00: 488397168 sectors, multi 0: LBA48 Feb 24 16:18:19 nobilx kernel: [ 37.369535] usb 2-1: device not accepting address 2, error -71 Feb 24 16:18:19 nobilx kernel: [ 37.406173] ata1.00: configured for UDMA/100 Feb 24 16:18:19 nobilx kernel: [ 37.573030] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2514N VF10 PQ: 0 ANSI: 5 Feb 24 16:18:19 nobilx kernel: [ 37.574220] ahci 0000:00:1f.2: version 3.0 Feb 24 16:18:19 nobilx kernel: [ 37.574237] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Feb 24 16:18:19 nobilx kernel: [ 37.921528] usb 6-3: new high speed USB device using ehci_hcd and address 2 Feb 24 16:18:19 nobilx kernel: [ 38.055890] usb 6-3: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 38.533497] usb 7-2: new high speed USB device using ehci_hcd and address 3 Feb 24 16:18:19 nobilx kernel: [ 38.577478] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Feb 24 16:18:19 nobilx kernel: [ 38.577482] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part Feb 24 16:18:19 nobilx kernel: [ 38.577486] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Feb 24 16:18:19 nobilx kernel: [ 38.577725] scsi2 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.577876] scsi3 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.577953] scsi4 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.577988] scsi5 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.578019] scsi6 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.578049] scsi7 : ahci Feb 24 16:18:19 nobilx kernel: [ 38.578132] ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.578135] ata4: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.578137] ata5: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.578139] ata6: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa80 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.578141] ata7: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb00 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.578143] ata8: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffb80 irq 507 Feb 24 16:18:19 nobilx kernel: [ 38.665842] usb 7-2: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 38.665910] hub 7-2:1.0: USB hub found Feb 24 16:18:19 nobilx kernel: [ 38.666015] hub 7-2:1.0: 4 ports detected Feb 24 16:18:19 nobilx kernel: [ 38.769574] usbcore: registered new interface driver libusual Feb 24 16:18:19 nobilx kernel: [ 38.773330] Initializing USB Mass Storage driver... Feb 24 16:18:19 nobilx kernel: [ 39.009442] usb 3-1: new full speed USB device using uhci_hcd and address 2 Feb 24 16:18:19 nobilx kernel: [ 39.053460] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 39.060304] ata3.00: ATA-7: SAMSUNG HM160JI, AD100-16, max UDMA/100 Feb 24 16:18:19 nobilx kernel: [ 39.060307] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 16:18:19 nobilx kernel: [ 39.067217] ata3.00: configured for UDMA/100 Feb 24 16:18:19 nobilx kernel: [ 39.196295] usb 3-1: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 39.207403] scsi8 : SCSI emulation for USB Mass Storage devices Feb 24 16:18:19 nobilx kernel: [ 39.207485] usb-storage: device found at 2 Feb 24 16:18:19 nobilx kernel: [ 39.207486] usb-storage: waiting for device to settle before scanning Feb 24 16:18:19 nobilx kernel: [ 39.413518] usb 7-2.1: new full speed USB device using ehci_hcd and address 4 Feb 24 16:18:19 nobilx kernel: [ 39.541415] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 39.561903] ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 Feb 24 16:18:19 nobilx kernel: [ 39.561906] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Feb 24 16:18:19 nobilx kernel: [ 39.563854] ata4.00: configured for UDMA/133 Feb 24 16:18:19 nobilx kernel: [ 39.725479] usb 7-2.1: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 39.877395] ata5: SATA link down (SStatus 0 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 39.941518] usb 7-2.3: new low speed USB device using ehci_hcd and address 5 Feb 24 16:18:19 nobilx kernel: [ 40.054846] usb 7-2.3: configuration #1 chosen from 1 choice Feb 24 16:18:19 nobilx kernel: [ 40.055666] usbcore: registered new interface driver usb-storage Feb 24 16:18:19 nobilx kernel: [ 40.055669] USB Mass Storage support registered. Feb 24 16:18:19 nobilx kernel: [ 40.055755] usbcore: registered new interface driver hiddev Feb 24 16:18:19 nobilx kernel: [ 40.058413] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input1 Feb 24 16:18:19 nobilx kernel: [ 40.085401] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 16:18:19 nobilx kernel: [ 40.089216] Fixing up Logitech keyboard report descriptor Feb 24 16:18:19 nobilx kernel: [ 40.089822] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input2 Feb 24 16:18:19 nobilx kernel: [ 40.121430] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1 Feb 24 16:18:19 nobilx kernel: [ 40.123849] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.3/7-2.3:1.0/input/input3 Feb 24 16:18:19 nobilx kernel: [ 40.133434] input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-2.3 Feb 24 16:18:19 nobilx kernel: [ 40.133447] usbcore: registered new interface driver usbhid Feb 24 16:18:19 nobilx kernel: [ 40.133450] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Feb 24 16:18:19 nobilx kernel: [ 40.185392] ata6: SATA link down (SStatus 0 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 40.497376] ata7: SATA link down (SStatus 0 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 40.973349] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 41.132424] ata8.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33, ATAPI AN Feb 24 16:18:19 nobilx kernel: [ 41.132428] ata8.00: applying bridge limits Feb 24 16:18:19 nobilx kernel: [ 41.288332] ata8.00: configured for UDMA/33 Feb 24 16:18:19 nobilx kernel: [ 41.288425] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM160JI AD10 PQ: 0 ANSI: 5 Feb 24 16:18:19 nobilx kernel: [ 41.288539] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 Feb 24 16:18:19 nobilx kernel: [ 41.289342] scsi 7:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 Feb 24 16:18:19 nobilx kernel: [ 41.289425] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 42.293296] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Feb 24 16:18:19 nobilx kernel: [ 42.293300] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Feb 24 16:18:19 nobilx kernel: [ 42.293306] PCI: Setting latency timer of device 0000:03:00.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 42.293408] scsi9 : ahci Feb 24 16:18:19 nobilx kernel: [ 42.293617] scsi10 : ahci Feb 24 16:18:19 nobilx kernel: [ 42.293665] ata9: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 Feb 24 16:18:19 nobilx kernel: [ 42.293668] ata10: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16 Feb 24 16:18:19 nobilx kernel: [ 42.613747] ata9: SATA link down (SStatus 0 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 42.933747] ata10: SATA link down (SStatus 0 SControl 300) Feb 24 16:18:19 nobilx kernel: [ 42.933824] ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 21 (level, low) -> IRQ 21 Feb 24 16:18:19 nobilx kernel: [ 42.983942] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8] Feb 24 16:18:19 nobilx kernel: [ 42.984005] Driver 'sd' needs updating - please use bus_type methods Feb 24 16:18:19 nobilx kernel: [ 42.984065] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Feb 24 16:18:19 nobilx kernel: [ 42.984074] sd 0:0:0:0: [sda] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 42.984076] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 42.984090] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 42.984125] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Feb 24 16:18:19 nobilx kernel: [ 42.984133] sd 0:0:0:0: [sda] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 42.984135] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 42.984148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 42.984151] sda:<4>Driver 'sr' needs updating - please use bus_type methods Feb 24 16:18:19 nobilx kernel: [ 42.990377] Feb 24 16:18:19 nobilx kernel: [ 42.990407] sd 0:0:0:0: [sda] Attached SCSI disk Feb 24 16:18:19 nobilx kernel: [ 42.990450] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) Feb 24 16:18:19 nobilx kernel: [ 42.990459] sd 2:0:0:0: [sdb] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 42.990461] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 42.990474] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 42.990504] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) Feb 24 16:18:19 nobilx kernel: [ 42.990512] sd 2:0:0:0: [sdb] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 42.990513] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 42.990526] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 42.990529] sdb: sdb1 sdb2 sdb3 sdb4 Feb 24 16:18:19 nobilx kernel: [ 43.661514] sd 2:0:0:0: [sdb] Attached SCSI disk Feb 24 16:18:19 nobilx kernel: [ 43.662147] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Feb 24 16:18:19 nobilx kernel: [ 43.662156] sd 3:0:0:0: [sdc] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 43.662158] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 43.662171] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 43.662200] sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) Feb 24 16:18:19 nobilx kernel: [ 43.662208] sd 3:0:0:0: [sdc] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 43.662210] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Feb 24 16:18:19 nobilx kernel: [ 43.662223] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Feb 24 16:18:19 nobilx kernel: [ 43.662225] sdc: sdc1 sdc2 sdc3 Feb 24 16:18:19 nobilx kernel: [ 43.713538] sd 3:0:0:0: [sdc] Attached SCSI disk Feb 24 16:18:19 nobilx kernel: [ 43.717814] sd 0:0:0:0: Attached scsi generic sg0 type 0 Feb 24 16:18:19 nobilx kernel: [ 43.717829] sd 2:0:0:0: Attached scsi generic sg1 type 0 Feb 24 16:18:19 nobilx kernel: [ 43.717844] sd 3:0:0:0: Attached scsi generic sg2 type 0 Feb 24 16:18:19 nobilx kernel: [ 43.717857] sr 7:0:0:0: Attached scsi generic sg3 type 5 Feb 24 16:18:19 nobilx kernel: [ 43.724010] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Feb 24 16:18:19 nobilx kernel: [ 43.724013] Uniform CD-ROM driver Revision: 3.20 Feb 24 16:18:19 nobilx kernel: [ 43.724044] sr 7:0:0:0: Attached scsi CD-ROM sr0 Feb 24 16:18:19 nobilx kernel: [ 44.018324] EXT3-fs: INFO: recovery required on readonly filesystem. Feb 24 16:18:19 nobilx kernel: [ 44.018327] EXT3-fs: write access will be enabled during recovery. Feb 24 16:18:19 nobilx kernel: [ 44.205573] usb-storage: device scan complete Feb 24 16:18:19 nobilx kernel: [ 44.206065] scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 Feb 24 16:18:19 nobilx kernel: [ 44.206567] scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 Feb 24 16:18:19 nobilx kernel: [ 44.207086] scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 Feb 24 16:18:19 nobilx kernel: [ 44.207567] scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 Feb 24 16:18:19 nobilx kernel: [ 44.208713] sd 8:0:0:0: [sdd] Attached SCSI removable disk Feb 24 16:18:19 nobilx kernel: [ 44.208740] sd 8:0:0:0: Attached scsi generic sg4 type 0 Feb 24 16:18:19 nobilx kernel: [ 44.257269] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000d7034f] Feb 24 16:18:19 nobilx kernel: [ 44.382810] sd 8:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 16:18:19 nobilx kernel: [ 44.383944] sd 8:0:0:1: [sde] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 44.383946] sd 8:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 16:18:19 nobilx kernel: [ 44.383948] sd 8:0:0:1: [sde] Assuming drive cache: write through Feb 24 16:18:19 nobilx kernel: [ 44.385930] sd 8:0:0:1: [sde] 125184 512-byte hardware sectors (64 MB) Feb 24 16:18:19 nobilx kernel: [ 44.387058] sd 8:0:0:1: [sde] Write Protect is off Feb 24 16:18:19 nobilx kernel: [ 44.387061] sd 8:0:0:1: [sde] Mode Sense: 03 00 00 00 Feb 24 16:18:19 nobilx kernel: [ 44.387063] sd 8:0:0:1: [sde] Assuming drive cache: write through Feb 24 16:18:19 nobilx kernel: [ 44.387066] sde: unknown partition table Feb 24 16:18:19 nobilx kernel: [ 44.394355] sd 8:0:0:1: [sde] Attached SCSI removable disk Feb 24 16:18:19 nobilx kernel: [ 44.394400] sd 8:0:0:1: Attached scsi generic sg5 type 0 Feb 24 16:18:19 nobilx kernel: [ 44.395341] sd 8:0:0:2: [sdf] Attached SCSI removable disk Feb 24 16:18:19 nobilx kernel: [ 44.395365] sd 8:0:0:2: Attached scsi generic sg6 type 0 Feb 24 16:18:19 nobilx kernel: [ 44.396337] sd 8:0:0:3: [sdg] Attached SCSI removable disk Feb 24 16:18:19 nobilx kernel: [ 44.396361] sd 8:0:0:3: Attached scsi generic sg7 type 0 Feb 24 16:18:19 nobilx kernel: [ 45.015348] kjournald starting. Commit interval 5 seconds Feb 24 16:18:19 nobilx kernel: [ 45.015360] EXT3-fs: sdb4: orphan cleanup on readonly fs Feb 24 16:18:19 nobilx kernel: [ 45.015366] ext3_orphan_cleanup: deleting unreferenced inode 4440487 Feb 24 16:18:19 nobilx kernel: [ 45.047668] ext3_orphan_cleanup: deleting unreferenced inode 1081366 Feb 24 16:18:19 nobilx kernel: [ 45.047678] ext3_orphan_cleanup: deleting unreferenced inode 1081367 Feb 24 16:18:19 nobilx kernel: [ 45.047684] ext3_orphan_cleanup: deleting unreferenced inode 1081365 Feb 24 16:18:19 nobilx kernel: [ 45.047690] ext3_orphan_cleanup: deleting unreferenced inode 1081364 Feb 24 16:18:19 nobilx kernel: [ 45.047696] ext3_orphan_cleanup: deleting unreferenced inode 1081356 Feb 24 16:18:19 nobilx kernel: [ 45.047702] EXT3-fs: sdb4: 6 orphan inodes deleted Feb 24 16:18:19 nobilx kernel: [ 45.047704] EXT3-fs: recovery complete. Feb 24 16:18:19 nobilx kernel: [ 45.072864] EXT3-fs: mounted filesystem with ordered data mode. Feb 24 16:18:19 nobilx kernel: [ 51.745582] input: PC Speaker as /devices/platform/pcspkr/input/input4 Feb 24 16:18:19 nobilx kernel: [ 51.805287] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Feb 24 16:18:19 nobilx kernel: [ 51.829272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Feb 24 16:18:19 nobilx kernel: [ 51.902181] iTCO_vendor_support: vendor-support=0 Feb 24 16:18:19 nobilx kernel: [ 51.928608] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) Feb 24 16:18:19 nobilx kernel: [ 51.928666] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) Feb 24 16:18:19 nobilx kernel: [ 51.928700] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Feb 24 16:18:19 nobilx kernel: [ 52.029648] input: Power Button (FF) as /devices/virtual/input/input5 Feb 24 16:18:19 nobilx kernel: [ 52.089192] ACPI: Power Button (FF) [PWRF] Feb 24 16:18:19 nobilx kernel: [ 52.089268] input: Power Button (CM) as /devices/virtual/input/input6 Feb 24 16:18:19 nobilx kernel: [ 52.153188] ACPI: Power Button (CM) [PWRB] Feb 24 16:18:19 nobilx kernel: [ 52.233700] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Feb 24 16:18:19 nobilx kernel: [ 52.233712] PCI: Setting latency timer of device 0000:02:00.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 52.234548] sky2 0000:02:00.0: v1.20 addr 0xfe8fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2 Feb 24 16:18:19 nobilx kernel: [ 52.235101] sky2 eth0: addr 00:18:f3:4f:68:4a Feb 24 16:18:19 nobilx kernel: [ 52.587832] nvidia: module license 'NVIDIA' taints kernel. Feb 24 16:18:19 nobilx kernel: [ 52.969449] Bluetooth: Core ver 2.11 Feb 24 16:18:19 nobilx kernel: [ 52.969496] NET: Registered protocol family 31 Feb 24 16:18:19 nobilx kernel: [ 52.969497] Bluetooth: HCI device and connection manager initialized Feb 24 16:18:19 nobilx kernel: [ 52.969501] Bluetooth: HCI socket layer initialized Feb 24 16:18:19 nobilx kernel: [ 52.995013] Bluetooth: HCI USB driver ver 2.9 Feb 24 16:18:19 nobilx kernel: [ 52.995816] usbcore: registered new interface driver hci_usb Feb 24 16:18:19 nobilx kernel: [ 53.039567] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Feb 24 16:18:19 nobilx kernel: [ 53.039575] PCI: Setting latency timer of device 0000:01:00.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 53.039662] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 Feb 24 16:18:19 nobilx kernel: [ 53.075602] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 Feb 24 16:18:19 nobilx kernel: [ 53.076409] PCI: Setting latency timer of device 0000:00:1b.0 to 64 Feb 24 16:18:19 nobilx kernel: [ 53.403894] sky2 eth0: enabling interface Feb 24 16:18:19 nobilx kernel: [ 54.762708] lp: driver loaded but no devices found Feb 24 16:18:19 nobilx kernel: [ 54.915488] NET: Registered protocol family 10 Feb 24 16:18:19 nobilx kernel: [ 54.915662] lo: Disabled Privacy Extensions Feb 24 16:18:19 nobilx kernel: [ 54.915980] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 24 16:18:19 nobilx kernel: [ 55.566736] EXT3 FS on sdb4, internal journal Feb 24 16:18:19 nobilx kernel: [ 55.721432] device-mapper: uevent: version 1.0.3 Feb 24 16:18:19 nobilx kernel: [ 55.721455] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com Feb 24 16:18:19 nobilx kernel: [ 55.821321] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both Feb 24 16:18:19 nobilx kernel: [ 55.826217] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 24 16:18:19 nobilx kernel: [ 56.874126] ip_tables: (C) 2000-2006 Netfilter Core Team Feb 24 16:18:19 nobilx kernel: [ 57.193393] No dock devices found. Feb 24 16:18:19 nobilx kernel: [ 57.301362] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' Feb 24 16:18:21 nobilx kernel: [ 60.034502] ppdev: user-space parallel port driver Feb 24 16:18:22 nobilx kernel: [ 60.927490] audit(1203866302.633:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=5749 profile="/usr/sbin/cupsd" namespace="default" Feb 24 16:18:27 nobilx kernel: [ 65.492855] Bluetooth: L2CAP ver 2.9 Feb 24 16:18:27 nobilx kernel: [ 65.492859] Bluetooth: L2CAP socket layer initialized Feb 24 16:18:27 nobilx kernel: [ 65.610581] Bluetooth: RFCOMM socket layer initialized Feb 24 16:18:27 nobilx kernel: [ 65.610594] Bluetooth: RFCOMM TTY layer initialized Feb 24 16:18:27 nobilx kernel: [ 65.610595] Bluetooth: RFCOMM ver 1.8 Feb 24 16:18:27 nobilx kernel: [ 65.827875] eth0: no IPv6 routers present Feb 24 16:46:24 nobilx kernel: [ 1742.403983] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 16:50:22 nobilx kernel: [ 1980.401802] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 16:57:50 nobilx kernel: [ 2428.432050] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 16:58:20 nobilx kernel: [ 2458.486307] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:05:06 nobilx kernel: [ 2864.407048] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:13:06 nobilx kernel: [ 3344.379455] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:18:04 nobilx kernel: [ 3642.406232] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:20:06 nobilx kernel: [ 3764.303225] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:23:52 nobilx kernel: [ 3990.406223] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:24:28 nobilx kernel: [ 4026.404153] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:39:34 nobilx kernel: [ 4932.292067] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:40:06 nobilx kernel: [ 4964.290228] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:45:30 nobilx kernel: [ 5288.331594] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:46:52 nobilx kernel: [ 5370.210886] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:47:42 nobilx kernel: [ 5420.332004] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:49:24 nobilx kernel: [ 5522.306142] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:57:32 nobilx kernel: [ 6010.178090] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:58:22 nobilx kernel: [ 6060.175213] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 17:59:10 nobilx kernel: [ 6108.172455] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:05:40 nobilx kernel: [ 6498.258025] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:07:50 nobilx kernel: [ 6628.198552] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:08:38 nobilx kernel: [ 6676.195792] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:22:24 nobilx kernel: [ 7502.092305] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:22:58 nobilx kernel: [ 7536.090350] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:23:22 nobilx kernel: [ 7560.144966] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:24:32 nobilx kernel: [ 7630.140943] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:24:52 nobilx kernel: [ 7650.083797] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:28:56 nobilx kernel: [ 7894.205760] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:32:30 nobilx kernel: [ 8108.061465] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:33:10 nobilx kernel: [ 8148.191156] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:36:10 nobilx kernel: [ 8328.048818] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:40:34 nobilx kernel: [ 8592.165628] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:40:58 nobilx kernel: [ 8616.032257] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:44:20 nobilx kernel: [ 8818.072639] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:47:26 nobilx kernel: [ 9004.013947] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:48:50 nobilx kernel: [ 9088.009118] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:49:10 nobilx kernel: [ 9108.007968] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:49:58 nobilx kernel: [ 9156.113200] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:52:24 nobilx kernel: [ 9301.996818] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:52:48 nobilx kernel: [ 9326.131428] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:53:36 nobilx kernel: [ 9374.128670] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:56:36 nobilx kernel: [ 9554.141767] usb 7-2.1: USB disconnect, address 4 Feb 24 18:56:40 nobilx kernel: [ 9558.090088] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 18:58:02 nobilx kernel: [ 9639.977380] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:00:24 nobilx kernel: [ 9782.021214] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:04:30 nobilx kernel: [10027.955071] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:05:46 nobilx kernel: [10104.006702] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:07:06 nobilx kernel: [10184.002102] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:09:26 nobilx kernel: [10323.994054] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:10:04 nobilx kernel: [10361.991868] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:12:06 nobilx kernel: [10483.928871] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:13:54 nobilx kernel: [10591.922662] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:17:46 nobilx kernel: [10823.965305] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:17:48 nobilx kernel: [10825.909206] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:17:54 nobilx kernel: [10831.908859] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:18:04 nobilx kernel: [10841.908287] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:19:22 nobilx kernel: [10920.043782] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:22:14 nobilx kernel: [11091.893921] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:24:56 nobilx kernel: [11253.884602] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:25:54 nobilx kernel: [11312.021243] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:27:50 nobilx kernel: [11427.938573] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:29:52 nobilx kernel: [11549.867563] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:32:02 nobilx kernel: [11679.860088] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:33:18 nobilx kernel: [11755.855718] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:34:22 nobilx kernel: [11819.996030] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:40:34 nobilx kernel: [12191.894647] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:42:12 nobilx kernel: [12289.969012] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:42:48 nobilx kernel: [12325.843454] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:43:32 nobilx kernel: [12369.964412] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:46:48 nobilx kernel: [12565.909146] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:46:50 nobilx kernel: [12567.857034] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:47:24 nobilx kernel: [12601.855078] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:48:14 nobilx kernel: [12651.856200] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:48:18 nobilx kernel: [12655.855986] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:49:10 nobilx kernel: [12707.964974] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:49:18 nobilx kernel: [12715.964517] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:49:54 nobilx kernel: [12751.846459] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:50:14 nobilx kernel: [12771.897304] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:50:30 nobilx kernel: [12787.896382] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:52:26 nobilx kernel: [12903.889711] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 19:57:06 nobilx kernel: [13183.941606] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:00:48 nobilx kernel: [13406.000839] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:00:52 nobilx kernel: [13409.912625] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:00:52 nobilx kernel: [13410.332599] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:02:26 nobilx kernel: [13503.915208] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:02:36 nobilx kernel: [13513.910638] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:03:24 nobilx kernel: [13561.999872] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:03:28 nobilx kernel: [13565.907647] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:09:12 nobilx kernel: [13909.987864] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:09:54 nobilx kernel: [13951.873452] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:09:58 nobilx kernel: [13955.874160] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:10:10 nobilx kernel: [13967.873073] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:10:10 nobilx kernel: [13968.289279] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:13:02 nobilx kernel: [14140.058636] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:15:28 nobilx kernel: [14285.858246] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:17:40 nobilx kernel: [14417.894655] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:18:16 nobilx kernel: [14453.892585] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:18:52 nobilx kernel: [14489.966512] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:19:44 nobilx kernel: [14541.963525] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:21:36 nobilx kernel: [14653.957109] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:22:04 nobilx kernel: [14682.071467] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:23:20 nobilx kernel: [14757.955105] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:23:20 nobilx kernel: [14758.199088] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:25:08 nobilx kernel: [14865.868896] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:25:44 nobilx kernel: [14902.066820] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:28:04 nobilx kernel: [15042.058771] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:30:20 nobilx kernel: [15177.806960] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:31:08 nobilx kernel: [15225.804200] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:32:36 nobilx kernel: [15313.799140] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:37:20 nobilx kernel: [15597.826809] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:37:36 nobilx kernel: [15614.029883] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:38:12 nobilx kernel: [15649.783822] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:38:14 nobilx kernel: [15651.783706] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:39:08 nobilx kernel: [15705.900599] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:40:08 nobilx kernel: [15766.021141] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:41:04 nobilx kernel: [15821.813930] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:43:14 nobilx kernel: [15951.886453] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:44:56 nobilx kernel: [16053.764594] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:47:06 nobilx kernel: [16184.005109] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:47:52 nobilx kernel: [16230.002464] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:47:56 nobilx kernel: [16234.002234] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:51:48 nobilx kernel: [16465.752905] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:52:16 nobilx kernel: [16493.747300] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:53:30 nobilx kernel: [16567.851038] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:57:46 nobilx kernel: [16823.984311] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:58:32 nobilx kernel: [16869.731781] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:58:58 nobilx kernel: [16895.730963] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 20:59:56 nobilx kernel: [16953.840843] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:00:30 nobilx kernel: [16987.838889] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:03:02 nobilx kernel: [17139.742151] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:04:24 nobilx kernel: [17221.829436] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:11:28 nobilx kernel: [17645.821056] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:11:46 nobilx kernel: [17663.972018] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:18:14 nobilx kernel: [18051.797712] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:18:32 nobilx kernel: [18069.796676] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:18:40 nobilx kernel: [18077.948213] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:18:44 nobilx kernel: [18081.947984] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:19:06 nobilx kernel: [18103.794723] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:20:00 nobilx kernel: [18157.943615] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:20:40 nobilx kernel: [18197.720894] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:24:30 nobilx kernel: [18427.932085] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:24:48 nobilx kernel: [18445.775060] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:25:08 nobilx kernel: [18465.773910] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:26:30 nobilx kernel: [18547.769195] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:26:48 nobilx kernel: [18565.768161] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:27:40 nobilx kernel: [18617.697170] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:28:32 nobilx kernel: [18669.922168] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:29:30 nobilx kernel: [18727.690845] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:31:02 nobilx kernel: [18819.689555] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:34:08 nobilx kernel: [19005.674864] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:39:52 nobilx kernel: [19349.667083] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:42:28 nobilx kernel: [19505.714114] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:44:30 nobilx kernel: [19627.871091] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:45:44 nobilx kernel: [19701.646844] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:46:50 nobilx kernel: [19767.699050] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:47:00 nobilx kernel: [19777.639479] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:47:48 nobilx kernel: [19825.859706] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:55:00 nobilx kernel: [20257.838868] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:56:06 nobilx kernel: [20323.611082] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:56:12 nobilx kernel: [20329.834728] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:57:14 nobilx kernel: [20391.663175] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:58:44 nobilx kernel: [20481.825989] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:59:14 nobilx kernel: [20511.824263] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 21:59:42 nobilx kernel: [20539.654663] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:08:24 nobilx kernel: [21061.568653] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:09:14 nobilx kernel: [21111.565778] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:16:04 nobilx kernel: [21521.778194] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:20:48 nobilx kernel: [21805.597870] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:23:50 nobilx kernel: [21987.511412] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:24:08 nobilx kernel: [22005.510379] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:25:22 nobilx kernel: [22079.506124] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:26:12 nobilx kernel: [22129.503248] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:28:14 nobilx kernel: [22251.736222] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:28:58 nobilx kernel: [22295.733688] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:29:24 nobilx kernel: [22321.568206] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:33:42 nobilx kernel: [22579.721361] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:34:04 nobilx kernel: [22601.552105] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:34:22 nobilx kernel: [22619.719064] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:36:26 nobilx kernel: [22743.543942] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:36:48 nobilx kernel: [22765.710690] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:37:12 nobilx kernel: [22789.541299] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:38:52 nobilx kernel: [22889.535549] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:40:14 nobilx kernel: [22971.454852] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:41:02 nobilx kernel: [23019.536079] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:43:44 nobilx kernel: [23181.526764] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:44:58 nobilx kernel: [23255.438508] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:47:10 nobilx kernel: [23387.674905] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:50:06 nobilx kernel: [23563.664788] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:56:54 nobilx kernel: [23971.397343] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 22:59:18 nobilx kernel: [24115.433061] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:00:24 nobilx kernel: [24181.385266] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:00:58 nobilx kernel: [24215.475306] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:07:02 nobilx kernel: [24579.454377] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:07:04 nobilx kernel: [24581.610253] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:07:22 nobilx kernel: [24599.609218] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:10:12 nobilx kernel: [24769.443453] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:10:26 nobilx kernel: [24783.442649] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:11:26 nobilx kernel: [24843.391205] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:12:24 nobilx kernel: [24901.387867] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:14:10 nobilx kernel: [25007.381824] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:16:18 nobilx kernel: [25135.610995] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:17:52 nobilx kernel: [25229.373020] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:18:36 nobilx kernel: [25273.602465] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:20:24 nobilx kernel: [25381.368267] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:20:38 nobilx kernel: [25395.427462] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:22:14 nobilx kernel: [25491.007377] vboxdrv: Trying to deactivate the NMI watchdog permanently... Feb 24 23:22:14 nobilx kernel: [25491.007382] vboxdrv: Successfully done. Feb 24 23:22:14 nobilx kernel: [25491.008193] vboxdrv: Successfully loaded version 1.5.4_OSE (interface 0x00050002). Feb 24 23:22:14 nobilx kernel: [25491.428587] tun: Universal TUN/TAP device driver, 1.6 Feb 24 23:22:14 nobilx kernel: [25491.428591] tun: (C) 1999-2004 Max Krasnyansky Feb 24 23:25:06 nobilx kernel: [25663.616041] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:25:20 nobilx kernel: [25677.375107] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:29:40 nobilx kernel: [25937.332336] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:30:56 nobilx kernel: [26013.379964] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:33:34 nobilx kernel: [26171.382845] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:33:46 nobilx kernel: [26183.385950] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:38:16 nobilx kernel: [26453.390645] usb 6-3: reset high speed USB device using ehci_hcd and address 2 Feb 24 23:40:58 nobilx kernel: [26615.381326] usb 6-3: reset high speed USB device using ehci_hcd and address 2