94911902 <== acx_i_start_xmit: 00000000
94911902 ==> acxpci_i_interrupt
94911902 <== acxpci_i_interrupt
94911902 ==> acx_interrupt_tasklet
got Tx_Complete IRQ
94911902   ==> acxpci_l_clean_txdesc
tx: desc->Ctl8's: 80 80 80 80 80 80 80 80 80 C0 80 80 80 80 80 80
tx: cleaning up bufs from 9
tx: wake queue (avail. Tx desc 16)
tx: cleaned 9: !ACK=0 !RTS=0 RTS=0 r111=0001 tx_free=16
94911902   <== acxpci_l_clean_txdesc: 00000001
94911902 <== acx_interrupt_tasklet
94911909 ==> acx_net_config
94911909   ==> acx_selectchannel
Changing to channel 3
94911909   <== acx_selectchannel: FFFFFF8D
configure(type:ACX1xx_IE_DOT11_TX_POWER_LEVEL,len:1)
94911909   ==> acxpci_s_issue_cmd_timeo_debug
issue_cmd(cmd:ACX1xx_CMD_CONFIGURE,buflen:5,timeout:50ms,type:0x100D)
input buffer (len=5):
94911909     ==> acx_dump_bytes
94911909     <== acx_dump_bytes
94911909     ==> acxpci_read_cmd_type_status
cmd_type:0000 cmd_status:0000 [Idle]
94911909     <== acxpci_read_cmd_type_status: 00000000
94911909     ==> acxpci_write_cmd_type_status
94911909     <== acxpci_write_cmd_type_status
94911909     ==> acx_s_mwait
94911909       ==> acxpci_i_interrupt
got Command_Complete IRQ
94911909       <== acxpci_i_interrupt
94911911     <== acx_s_mwait
94911911     ==> acxpci_read_cmd_type_status
cmd_type:0002 cmd_status:0001 [Success]
94911911     <== acxpci_read_cmd_type_status: 00000001
94911911     ==> acxpci_write_cmd_type_status
94911911     <== acxpci_write_cmd_type_status
issue_cmd(ACX1xx_CMD_CONFIGURE): took 2 jiffies to complete
94911911   <== acxpci_s_issue_cmd_timeo_debug: 00000000
94911911   ==> acx_s_update_card_settings
get_mask 0x00000000, set_mask 0x00008200
updating transmit power: 15 dBm
configure(type:ACX1xx_IE_DOT11_TX_POWER_LEVEL,len:1)
94911911     ==> acxpci_s_issue_cmd_timeo_debug
issue_cmd(cmd:ACX1xx_CMD_CONFIGURE,buflen:5,timeout:50ms,type:0x100D)
input buffer (len=5):
94911911       ==> acx_dump_bytes
94911911       <== acx_dump_bytes
94911911       ==> acxpci_read_cmd_type_status
cmd_type:0000 cmd_status:0000 [Idle]
94911911       <== acxpci_read_cmd_type_status: 00000000
94911911       ==> acxpci_write_cmd_type_status
94911911       <== acxpci_write_cmd_type_status
94911911       ==> acx_s_mwait
94911911         ==> acxpci_i_interrupt
got Command_Complete IRQ
94911911         <== acxpci_i_interrupt
94911913       <== acx_s_mwait
94911913       ==> acxpci_read_cmd_type_status
cmd_type:0002 cmd_status:0001 [Success]
94911913       <== acxpci_read_cmd_type_status: 00000001
94911913       ==> acxpci_write_cmd_type_status
94911913       <== acxpci_write_cmd_type_status
issue_cmd(ACX1xx_CMD_CONFIGURE): took 2 jiffies to complete
94911913     <== acxpci_s_issue_cmd_timeo_debug: 00000000
updating channel to: 3
updating: enable Tx
94911913     ==> acxpci_s_issue_cmd_timeo_debug
issue_cmd(cmd:ACX1xx_CMD_ENABLE_TX,buflen:1,timeout:50ms,type:0x4103)
input buffer (len=1):
94911913       ==> acx_dump_bytes
94911913       <== acx_dump_bytes
94911913       ==> acxpci_read_cmd_type_status
cmd_type:0000 cmd_status:0000 [Idle]
94911913       <== acxpci_read_cmd_type_status: 00000000
94911913       ==> acxpci_write_cmd_type_status
94911913       <== acxpci_write_cmd_type_status
94911913       ==> acx_s_mwait
94911913         ==> acxpci_i_interrupt
got Command_Complete IRQ
94911913         <== acxpci_i_interrupt
94911915       <== acx_s_mwait
94911915       ==> acxpci_read_cmd_type_status
cmd_type:0004 cmd_status:0001 [Success]
94911915       <== acxpci_read_cmd_type_status: 00000001
94911915       ==> acxpci_write_cmd_type_status
94911915       <== acxpci_write_cmd_type_status
issue_cmd(ACX1xx_CMD_ENABLE_TX): took 2 jiffies to complete
94911915     <== acxpci_s_issue_cmd_timeo_debug: 00000000
FIXME: Possibly broken code in acx_s_update_card_settings() at /home/devel/acx-mac80211/common.c:3769
updating: enable Rx on channel: 3
94911915     ==> acxpci_s_issue_cmd_timeo_debug
issue_cmd(cmd:ACX1xx_CMD_ENABLE_RX,buflen:1,timeout:50ms,type:0x4103)
input buffer (len=1):
94911915       ==> acx_dump_bytes
94911915       <== acx_dump_bytes
94911915       ==> acxpci_read_cmd_type_status
cmd_type:0000 cmd_status:0000 [Idle]
94911915       <== acxpci_read_cmd_type_status: 00000000
94911915       ==> acxpci_write_cmd_type_status
94911915       <== acxpci_write_cmd_type_status
94911915       ==> acx_s_mwait
94911915         ==> acxpci_i_interrupt
got Command_Complete IRQ
94911915         <== acxpci_i_interrupt
94911916         ==> acxpci_i_interrupt
94911916         <== acxpci_i_interrupt
94911917       <== acx_s_mwait
94911917       ==> acxpci_read_cmd_type_status
cmd_type:0003 cmd_status:0001 [Success]
94911917       <== acxpci_read_cmd_type_status: 00000001
94911917       ==> acxpci_write_cmd_type_status
94911917       <== acxpci_write_cmd_type_status
issue_cmd(ACX1xx_CMD_ENABLE_RX): took 2 jiffies to complete
94911917     <== acxpci_s_issue_cmd_timeo_debug: 00000000
94911917   <== acx_s_update_card_settings
94911917 <== acx_net_config
94911917 ==> acx_interrupt_tasklet
got Rx_Complete IRQ
94911917   ==> acxpci_l_process_rxdesc
rx: buf 7 full
rx: tail=8 Ctl_16=0080 Status=80000000
rx: 802.11 buf[146]: 
94911917     ==> acx_dump_bytes
94911917     <== acx_dump_bytes
94911917     ==> acx_l_rx
94911917     <== acx_l_rx
94911917   <== acxpci_l_process_rxdesc
94911917 <== acx_interrupt_tasklet
94911924 ==> acx_i_start_xmit
94911924   ==> acxpci_l_alloc_tx
tx: got desc 10, 15 remain
94911924   <== acxpci_l_alloc_tx
since you can read this - acx_l_alloc_tx shouldn't be the problem
maybe it's the memcpy() ???
nah... possibly it's acx_l_tx_data !!!
94911924   ==> acxpci_l_tx_data
1
2
3
4
f.1
f.2
5
yes sir, this is an acx111
6