Linux version 2.6.24.3 (root@darkstar) (gcc version 4.2.3) #2 Wed Feb 27 12:14:45 PST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
 BIOS-e820: 0000000007fe0000 - 0000000007ff8000 (ACPI data)
 BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
Entering add_active_range(0, 0, 32736) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    32736
  HighMem     32736 ->    32736
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    32736
On node 0 totalpages: 32736
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 223 pages used for memmap
  Normal zone: 28417 pages, LIFO batch:7
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI 2.1 present.
ACPI: RSDP 000FADE0, 0014 (r0 AMI   )
ACPI: RSDT 07FF0000, 0028 (r1 OEMID  XXXXXXXX        1 AMI        97)
ACPI: FACP 07FF1000, 0074 (r1 OEMID  XXXXXXXX        1 AMI        97)
ACPI: DSDT 07FE0000, 1BC0 (r1    AMD VALIDATE        1 MSFT  100000B)
ACPI: FACS 07FF8000, 0040
ACPI: PM-Timer IO Port: 0x5008
Allocating PCI resources starting at 10000000 (gap: 08000000:f7f80000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32481
Kernel command line: auto BOOT_IMAGE=2.6.24.3 ro root=801
No local APIC present or hardware disabled
mapped APIC to ffffb000 (01101000)
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 698.662 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126596k/130944k available (1746k kernel code, 3944k reserved, 727k data, 156k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xc8800000 - 0xff7fe000   ( 879 MB)
    lowmem  : 0xc0000000 - 0xc7fe0000   ( 127 MB)
      .init : 0xc036e000 - 0xc0395000   ( 156 kB)
      .data : 0xc02b48ac - 0xc036a87c   ( 727 kB)
      .text : 0xc0100000 - 0xc02b48ac   (1746 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1398.27 BogoMIPS (lpj=6991381)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0081f9ff c0c1f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0081f9ff c0c1f9ff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: AMD-K7(tm) Processor stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0e00)
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:00: iomem range 0x7fe0000-0x7ffffff could not be reserved
system 00:00: iomem range 0x100000-0x7fdffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: fc600000-fe6fffff
  PREFETCH window: f0400000-f44fffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
Machine check exception polling timer started.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Firmware left 0000:00:11.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:05.0
vesafb: framebuffer at 0xf2000000, mapped to 0xc8880000, using 1536k, total 16384k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c000:03c5
vesafb: pmi: set display start = c00c03fe, set palette = c00c0474
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected AMD Irongate chipset
agpgart: AMD 751 chipset with NVidia GeForce detected. Forcing to 1X due to errata.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized drm 1.1.0 20060810
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
pata_amd 0000:00:07.1: version 0.3.10
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xcb00 irq 14
ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xcb08 irq 15
Switched to NOHz mode on CPU #0
ata1.00: ATA-6: ST3160021A, 8.01, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/66
scsi 0:0:0:0: Direct-Access     ATA      ST3160021A       8.01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input1
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 156k freed
amd756_smbus 0000:00:07.3: SMBREV = 0x3
amd756_smbus 0000:00:07.3: AMD756_smba = 0x50E0
i2c-adapter i2c-0: adapter [SMBus AMD756 adapter at 50e0] registered
i2c-dev: adapter [SMBus AMD756 adapter at 50e0] registered as minor 0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:00:07.4: OHCI Host Controller
ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:07.4: irq 9, io mem 0xfebf7000
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xfebfe000, irq 11, MAC addr 00:d0:b7:68:f4:d7
EXT3 FS on sda1, internal journal
QLogic Fibre Channel HBA Driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
qla2xxx 0000:00:14.0: Found an ISP2200, irq 10, iobase 0xc884c000
qla2xxx 0000:00:14.0: Configuring PCI space...
qla2xxx 0000:00:14.0: Configure NVRAM parameters...
qla2xxx 0000:00:14.0: Verifying loaded RISC code...
qla2xxx 0000:00:14.0: Allocated (252 KB) for firmware dump...
scsi2 : qla2xxx
qla2xxx 0000:00:14.0: 
 QLogic Fibre Channel HBA Driver: 8.02.00-k5
  QLogic QLA22xx - 
  ISP2200: PCI (33 MHz) @ 0000:00:14.0 hdma-, host#=2, fw=2.02.08 TP
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
qla2xxx 0000:00:14.0: Cable is unplugged...