dustbunny:~# ztcfg -vvvvvvvvvvvvvv Zaptel Version: 1.4.8 Echo Canceller: MG2 Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: Clear channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 24 channels to configure. -- Reloading module 'chan_zap.so' (Zapata Telephony) == Parsing '/etc/asterisk/zapata.conf': Found [Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11176 process_zap: Ignoring switchtype [Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11176 process_zap: Ignoring signalling [Mar 11 04:11:53] ERROR[12504]: chan_zap.c:10527 build_channels: Unable to reconfigure channel '1-23' [Mar 11 04:11:53] WARNING[12504]: chan_zap.c:11494 reload: Reload of chan_zap.so is unsuccessful! [Mar 11 04:11:53] VERBOSE[12504] logger.c: -- Reloading module 'chan_zap.so' (Zapata Telephony) [Mar 11 04:11:53] VERBOSE[12504] logger.c: == Parsing '/etc/asterisk/zapata.conf': [Mar 11 04:11:53] VERBOSE[12504] logger.c: Found [Mar 11 04:11:53] WARNING[12504] chan_zap.c: Ignoring switchtype [Mar 11 04:11:53] WARNING[12504] chan_zap.c: Ignoring signalling [Mar 11 04:11:53] ERROR[12504] chan_zap.c: Unable to reconfigure channel '1-23' [Mar 11 04:11:53] WARNING[12504] chan_zap.c: Reload of chan_zap.so is unsuccessful! dustbunny:/etc/asterisk# cat /proc/zaptel/1 Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF 1 WPT1/0/1 Clear 2 WPT1/0/2 Clear 3 WPT1/0/3 Clear 4 WPT1/0/4 Clear 5 WPT1/0/5 Clear 6 WPT1/0/6 Clear 7 WPT1/0/7 Clear 8 WPT1/0/8 Clear 9 WPT1/0/9 Clear 10 WPT1/0/10 Clear 11 WPT1/0/11 Clear 12 WPT1/0/12 Clear 13 WPT1/0/13 Clear 14 WPT1/0/14 Clear 15 WPT1/0/15 Clear 16 WPT1/0/16 Clear 17 WPT1/0/17 Clear 18 WPT1/0/18 Clear 19 WPT1/0/19 Clear 20 WPT1/0/20 Clear 21 WPT1/0/21 Clear 22 WPT1/0/22 Clear 23 WPT1/0/23 Clear 24 WPT1/0/24 HDLCFCS (zaptel) # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:12 bus:2 span:1] span=1,0,0,esf,b8zs bchan=1-23 dchan=24 (zapata) ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:12 bus:2 span:1] context=from-pstn group=1 switchtype=national signalling=pri_cpe channel => 1-23 (wanpipe) #================================================ # WANPIPE1 Configuration File #================================================ # # Date: Wed Dec 6 20:29:03 UTC 2006 # # Note: This file was generated automatically # by /usr/local/sbin/setup-sangoma program. # # If you want to edit this file, it is # recommended that you use wancfg program # to do so. #================================================ # Sangoma Technologies Inc. #================================================ [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 12 PCIBUS = 2 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 24 TDMV_HW_DTMF = NO [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES Connected to Asterisk 1.4.17 currently running on dustbunny (pid = 11293) Verbosity is at least 7 dustbunny*CLI> zap show status Description Alarms IRQ bpviol CRC4 wanpipe1 card 0 OK 0 0 0 dustbunny*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo from-pstn default dustbunny*CLI> -- Executing [2004005@TRG:1] Dial("SIP/110-08366a20", "zap/g1/2004005") in new stack [Mar 11 04:08:23] WARNING[12396]: app_dial.c:1191 dial_exec_full: Unable to create channel of type 'zap' (cause 0 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/110-08366a20' status is 'CHANUNAVAIL' -- Executing [2004005@TRG:1] Dial("SIP/110-08366a20", "zap/g1/2004005") in new stack [Mar 11 04:08:23] WARNING[12396]: app_dial.c:1191 dial_exec_full: Unable to create channel of type 'zap' (cause 0 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/110-08366a20' status is 'CHANUNAVAIL'