dustbunny:~# wanrouter status Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 217 | 12 | 1 | EXT | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT HDLC | N/A | Disconnected | /etc/asterisk/zapata.conf ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes ;rxgain=0.0 ;txgain=0.0 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:12 bus:2 span:1] context=from-pstn group=1 switchtype=national signalling=pri_cpe channel => 1-23 /etc/zaptel.conf # Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf) # loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:12 bus:2 span:1] span=1,0,0,esf,b8zs bchan=1-23 dchan=24 dustbunny:~# cat /proc/zaptel/1 Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF 1 WPT1/0/1 Clear (In use) 2 WPT1/0/2 Clear (In use) 3 WPT1/0/3 Clear (In use) 4 WPT1/0/4 Clear (In use) 5 WPT1/0/5 Clear (In use) 6 WPT1/0/6 Clear (In use) 7 WPT1/0/7 Clear (In use) 8 WPT1/0/8 Clear (In use) 9 WPT1/0/9 Clear (In use) 10 WPT1/0/10 Clear (In use) 11 WPT1/0/11 Clear (In use) 12 WPT1/0/12 Clear (In use) 13 WPT1/0/13 Clear (In use) 14 WPT1/0/14 Clear (In use) 15 WPT1/0/15 Clear (In use) 16 WPT1/0/16 Clear (In use) 17 WPT1/0/17 Clear (In use) 18 WPT1/0/18 Clear (In use) 19 WPT1/0/19 Clear (In use) 20 WPT1/0/20 Clear (In use) 21 WPT1/0/21 Clear (In use) 22 WPT1/0/22 Clear (In use) 23 WPT1/0/23 Clear (In use) 24 WPT1/0/24 HDLCFCS (In use) dustbunny:~# ztcfg -vvvvvvvvvvvvvvvvvvvvv Zaptel Version: 1.4.8 Echo Canceller: MG2 Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Slaves: 01) Channel 02: Clear channel (Default) (Slaves: 02) Channel 03: Clear channel (Default) (Slaves: 03) Channel 04: Clear channel (Default) (Slaves: 04) Channel 05: Clear channel (Default) (Slaves: 05) Channel 06: Clear channel (Default) (Slaves: 06) Channel 07: Clear channel (Default) (Slaves: 07) Channel 08: Clear channel (Default) (Slaves: 08) Channel 09: Clear channel (Default) (Slaves: 09) Channel 10: Clear channel (Default) (Slaves: 10) Channel 11: Clear channel (Default) (Slaves: 11) Channel 12: Clear channel (Default) (Slaves: 12) Channel 13: Clear channel (Default) (Slaves: 13) Channel 14: Clear channel (Default) (Slaves: 14) Channel 15: Clear channel (Default) (Slaves: 15) Channel 16: Clear channel (Default) (Slaves: 16) Channel 17: Clear channel (Default) (Slaves: 17) Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 24 channels to configure. dustbunny*CLI> zap show status Description Alarms IRQ bpviol CRC4 wanpipe1 card 0 OK 0 0 0 dustbunny*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo from-pstn default 1 from-pstn default 2 from-pstn default 3 from-pstn default 4 from-pstn default 5 from-pstn default 6 from-pstn default 7 from-pstn default 8 from-pstn default 9 from-pstn default 10 from-pstn default 11 from-pstn default 12 from-pstn default 13 from-pstn default 14 from-pstn default 15 from-pstn default 16 from-pstn default 17 from-pstn default 18 from-pstn default 19 from-pstn default 20 from-pstn default 21 from-pstn default 22 from-pstn default 23 from-pstn default Connected to Asterisk 1.4.17 currently running on dustbunny (pid = 13288) Verbosity is at least 7 -- Executing [2004005@TRG:1] Dial("SIP/110-08388950", "zap/g1/2004005||wW") in new stack dustbunny*CLI> -- Executing [2004005@TRG:1] Dial("SIP/110-08388950", "zap/g1/2004005||wW") in new stack [Mar 11 04:33:32] WARNING[13503]: app_dial.c:1191 dial_exec_full: Unable to create channel of type 'zap' (cause 34 - Circuit/channel congestion) Unable to create channel of type 'zap' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time (1:0/1/0) dustbunny*CLI> == Everyone is busy/congested at this time (1:0/1/0) == Auto fallthrough, channel 'SIP/110-08388950' status is 'CONGESTION' dustbunny*CLI> == Auto fallthrough, channel 'SIP/110-08388950' status is 'CONGESTION' [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reloading module 'chan_zap.so' (Zapata Telephony) [Mar 11 04:33:53] VERBOSE[13500] logger.c: == Parsing '/etc/asterisk/zapata.conf': [Mar 11 04:33:53] VERBOSE[13500] logger.c: Found [Mar 11 04:33:53] WARNING[13500] chan_zap.c: Ignoring switchtype [Mar 11 04:33:53] WARNING[13500] chan_zap.c: Ignoring signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 1, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 2, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 3, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 4, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 5, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 6, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 7, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 8, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 9, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 10, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 11, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 12, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 13, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 14, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 15, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 16, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 17, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 18, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 19, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 20, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 21, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 22, ISDN PRI signalling [Mar 11 04:33:53] DEBUG[13500] chan_zap.c: Failed to read gains: Invalid argument [Mar 11 04:33:53] VERBOSE[13500] logger.c: -- Reconfigured channel 23, ISDN PRI signalling