julianna:~# smartctl -a /dev/hdb smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar WDxxxAB series Device Model: WDC WD400AB-34BVA0 Serial Number: WD-WMA7F1187735 Firmware Version: 21.01H21 User Capacity: 40,020,664,320 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Mar 11 19:04:57 2008 VET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (2376) seconds. Offline data collection capabilities: (0x3b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 42) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 191 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 097 097 021 Pre-fail Always - 4200 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 967 5 Reallocated_Sector_Ct 0x0032 199 199 112 Old_age Always - 1 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 34566 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 886 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 44 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 171 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 171 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 01 b6 8c 0a e0 00 00:04:25.200 READ VERIFY SECTOR(S) c8 00 01 3b 8b 38 e1 00 00:04:25.200 READ DMA c8 00 01 00 00 00 e0 00 00:04:25.200 READ DMA 40 00 01 b5 8c 0a e0 00 00:04:25.200 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:04:25.200 READ DMA Error 170 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 02 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 02 b5 8c 0a e0 00 00:04:20.100 READ VERIFY SECTOR(S) c8 00 01 3b 8b 38 e1 00 00:04:20.100 READ DMA c8 00 01 00 00 00 e0 00 00:04:20.100 READ DMA 40 00 02 b3 8c 0a e0 00 00:04:20.100 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:04:20.100 READ DMA Error 169 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 04 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 04 b3 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S) 40 00 04 af 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S) 40 00 08 b7 8c 0a e0 00 00:04:15.100 READ VERIFY SECTOR(S) c8 00 01 3b 8b 38 e1 00 00:04:15.050 READ DMA c8 00 01 00 00 00 e0 00 00:04:15.050 READ DMA Error 168 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 08 af 8c 0a e0 00 00:04:10.100 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:04:10.100 READ DMA c8 00 01 00 00 00 e0 00 00:04:10.100 READ DMA 40 00 10 af 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S) c8 00 01 3b 8b 38 e1 00 00:04:04.850 READ DMA Error 167 occurred at disk power-on lifetime: 205 hours (8 days + 13 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 b6 8c 0a e0 Error: UNC at LBA = 0x000a8cb6 = 691382 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 00 10 af 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S) c8 00 01 3b 8b 38 e1 00 00:04:04.850 READ DMA c8 00 01 00 00 00 e0 00 00:04:04.850 READ DMA 40 00 10 9f 8c 0a e0 00 00:04:04.850 READ VERIFY SECTOR(S) c8 00 01 00 00 00 e0 00 00:04:04.850 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 705 - # 2 Conveyance offline Completed without error 00% 705 - # 3 Conveyance offline Completed without error 00% 704 - # 4 Short offline Completed without error 00% 704 - # 5 Extended offline Aborted by host 80% 704 - # 6 Short offline Completed without error 00% 704 - # 7 Extended offline Completed without error 00% 434 - # 8 Short offline Completed without error 00% 0 - Device does not support Selective Self Tests/Logging julianna:~#