# Makefile.in generated by automake 1.10 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/dbus pkglibdir = $(libdir)/dbus pkgincludedir = $(includedir)/dbus am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i486-slackware-linux-gnu host_triplet = i486-slackware-linux-gnu target_triplet = i486-slackware-linux-gnu subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Doxyfile.in \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/config.h.in $(srcdir)/dbus-1.pc.in \ $(top_srcdir)/configure \ $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service.in \ $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service.in \ $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service.in \ $(top_srcdir)/test/data/valid-config-files-system/debug-allow-all-fail.conf.in \ $(top_srcdir)/test/data/valid-config-files-system/debug-allow-all-pass.conf.in \ $(top_srcdir)/test/data/valid-config-files/debug-allow-all-sha1.conf.in \ $(top_srcdir)/test/data/valid-config-files/debug-allow-all.conf.in \ $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service.in \ $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service.in \ $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in \ $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in \ $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service.in \ $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service.in \ $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in \ $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in \ AUTHORS COPYING ChangeLog INSTALL NEWS compile config.guess \ config.sub depcomp install-sh ltmain.sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = Doxyfile dbus-1.pc \ test/data/valid-config-files/debug-allow-all.conf \ test/data/valid-config-files/debug-allow-all-sha1.conf \ test/data/valid-config-files-system/debug-allow-all-pass.conf \ test/data/valid-config-files-system/debug-allow-all-fail.conf \ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service \ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service \ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service \ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service \ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service \ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service \ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service \ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service \ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service \ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service \ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgconfigdir)" pkgconfigDATA_INSTALL = $(INSTALL_DATA) DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run aclocal-1.10 AMTAR = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run tar AR = ar AUTOCONF = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run autoconf AUTOHEADER = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run autoheader AUTOMAKE = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run automake-1.10 AWK = gawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -O2 -march=i486 -mtune=i686 -Wall -Wchar-subscripts -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -Wdeclaration-after-statement -fno-common CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -O2 -march=i486 -mtune=i686 CYGPATH_W = echo DBUS_BINDIR = /usr/bin DBUS_BUS_CFLAGS = DBUS_BUS_LIBS = -lexpat DBUS_CLIENT_CFLAGS = DBUS_CLIENT_LIBS = DBUS_CONSOLE_AUTH_DIR = /var/run/console/ DBUS_CONSOLE_OWNER_FILE = DBUS_DAEMONDIR = /usr/bin DBUS_DATADIR = /usr/share DBUS_HAVE_INT64 = 1 DBUS_INT16_TYPE = short DBUS_INT32_TYPE = int DBUS_INT64_CONSTANT = (val##LL) DBUS_INT64_TYPE = long long DBUS_LAUNCHER_CFLAGS = DBUS_LAUNCHER_LIBS = -lexpat DBUS_LIBEXECDIR = /usr/libexec DBUS_MAJOR_VERSION = 1 DBUS_MICRO_VERSION = 20 DBUS_MINOR_VERSION = 1 DBUS_PATH_OR_ABSTRACT = abstract DBUS_SESSION_SOCKET_DIR = /tmp DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = unix:path=/var/run/dbus/system_bus_socket DBUS_SYSTEM_PID_FILE = /var/run/dbus/pid DBUS_SYSTEM_SOCKET = /var/run/dbus/system_bus_socket DBUS_TEST_CFLAGS = DBUS_TEST_LIBS = DBUS_UINT64_CONSTANT = (val##ULL) DBUS_USER = messagebus DBUS_VERSION = 1.1.20 DBUS_X_CFLAGS = DBUS_X_LIBS = DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DOXYGEN = no ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = EXPANDED_BINDIR = /usr/bin EXPANDED_DATADIR = /usr/share EXPANDED_LIBDIR = /usr/lib EXPANDED_LIBEXECDIR = /usr/libexec EXPANDED_LOCALSTATEDIR = /var EXPANDED_SYSCONFDIR = /etc F77 = g77 FFLAGS = -g -O2 GETTEXT_PACKAGE = dbus-1 GREP = /bin/grep INSTALL = /bin/ginstall -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBXML_CFLAGS = LIBXML_LIBS = LN_S = ln -s LTLIBOBJS = LT_AGE = 4 LT_CURRENT = 7 LT_REVISION = 0 MAINT = # MAKEINFO = ${SHELL} /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/missing --run makeinfo MKDIR_P = /bin/mkdir -p OBJEXT = o PACKAGE = dbus PACKAGE_BUGREPORT = PACKAGE_NAME = dbus PACKAGE_STRING = dbus 1.1.20 PACKAGE_TARNAME = dbus PACKAGE_VERSION = 1.1.20 PATH_SEPARATOR = : PIC_CFLAGS = -fPIC PIC_LDFLAGS = -Wl,-z,relro PIE_CFLAGS = -fPIE PIE_LDFLAGS = -pie -Wl,-z,relro PKG_CONFIG = RANLIB = ranlib R_DYNAMIC_LDFLAG = SECTION_FLAGS = SECTION_LDFLAGS = SED = /bin/sed SET_MAKE = SHELL = /bin/sh STRIP = strip TEST_BUS_BINARY = TEST_EXIT_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/test-exit TEST_INVALID_SERVICE_DIR = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/data/invalid-service-files TEST_INVALID_SERVICE_SYSTEM_DIR = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/data/invalid-service-files-system TEST_LAUNCH_HELPER_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/bus/dbus-daemon-launch-helper-test TEST_SEGFAULT_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/test-segfault TEST_SERVICE_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/test-service TEST_SHELL_SERVICE_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/test-shell-service TEST_SLEEP_FOREVER_BINARY = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/test-sleep-forever TEST_SOCKET_DIR = /tmp TEST_VALID_SERVICE_DIR = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/data/valid-service-files TEST_VALID_SERVICE_SYSTEM_DIR = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/test/data/valid-service-files-system VERSION = 1.1.20 XMKMF = XMLTO = no X_CFLAGS = X_EXTRA_LIBS = X_LIBS = X_PRE_LIBS = abs_builddir = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20 abs_srcdir = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20 abs_top_builddir = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20 abs_top_srcdir = /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20 ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = g77 am__include = include am__leading_dot = . am__quote = am__tar = tar --format=ustar -chf - "$$tardir" am__untar = tar -xf - bindir = ${exec_prefix}/bin build = i486-slackware-linux-gnu build_alias = i486-slackware-linux build_cpu = i486 build_os = linux-gnu build_vendor = slackware builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = i486-slackware-linux-gnu host_alias = host_cpu = i486 host_os = linux-gnu host_vendor = slackware htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/info install_sh = $(SHELL) /home/bipbip/Travail/Packages/ISO/ap/dbus/dbus-1.1.20/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = /var mandir = /usr/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s&$$&&;s&^&& psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = /etc target = i486-slackware-linux-gnu target_alias = target_cpu = i486 target_os = linux-gnu target_vendor = slackware top_builddir = . top_srcdir = . SUBDIRS = dbus bus doc tools test DIST_SUBDIRS = dbus bus doc tools test pkgconfigdir = $(libdir)/pkgconfig pkgconfig_DATA = dbus-1.pc DISTCLEANFILES = \ dbus-1.pc EXTRA_DIST = \ HACKING \ dbus-1.pc.in \ cleanup-man-pages.sh #GCOV_DIRS = dbus bus all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: # $(am__configure_deps) cd $(top_srcdir) && $(AUTOHEADER) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in cd $(top_builddir) && $(SHELL) ./config.status $@ dbus-1.pc: $(top_builddir)/config.status $(srcdir)/dbus-1.pc.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-config-files/debug-allow-all.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files/debug-allow-all.conf.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-config-files/debug-allow-all-sha1.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files/debug-allow-all-sha1.conf.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-config-files-system/debug-allow-all-pass.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files-system/debug-allow-all-pass.conf.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-config-files-system/debug-allow-all-fail.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files-system/debug-allow-all-fail.conf.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service: $(top_builddir)/config.status $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service: $(top_builddir)/config.status $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service: $(top_builddir)/config.status $(top_srcdir)/test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool install-pkgconfigDATA: $(pkgconfig_DATA) @$(NORMAL_INSTALL) test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" @list='$(pkgconfig_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done uninstall-pkgconfigDATA: @$(NORMAL_UNINSTALL) @list='$(pkgconfig_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(DATA) config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-pkgconfigDATA install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-pkgconfigDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-local am--refresh check check-am clean \ clean-generic clean-libtool ctags ctags-recursive dist \ dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \ distcheck distclean distclean-generic distclean-hdr \ distclean-libtool distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-pkgconfigDATA install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic \ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-pkgconfigDATA all-local: Doxyfile #clean-gcov: # find -name "*.da" -o -name "*.gcov" | xargs rm || true #clean-bbg: # find -name "*.bbg" -o -name "*.bb" | xargs rm || true #.PHONY: coverage-report.txt #coverage-report.txt: # BBG_FILES=`find $(GCOV_DIRS) -name "*.bbg" -o -name "*.gcno"` ; \ # C_FILES= ; \ # for F in $$BBG_FILES ; do \ # F_nolibs=`echo $$F | sed -e 's/.libs\///g'` ; \ # C=`echo $$F_nolibs | sed -e 's/.bbg/.c/g' | sed -e 's/.gcno/.c/g'` ; \ # B=`basename $$F .bbg` ; \ # D=`dirname $$F` ; \ # DA=`echo $$F | sed -e 's/.bbg/.da/g'` ; \ # DA_libs=`echo $$D/.libs/$$B/.da` ; \ # if test -e $$DA || test -e $$DA_libs; then \ # C_FILES="$$C_FILES $$C" ; \ # fi ; \ # done ; \ # echo $$C_FILES ; \ # $(top_builddir)/test/decode-gcov --report $$C_FILES > coverage-report.txt #check-coverage: clean-gcov all check coverage-report.txt # cat coverage-report.txt coverage-report.txt: echo "Need to reconfigure with --enable-gcov" check-coverage: echo "Need to reconfigure with --enable-gcov" # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: