Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC Command line: root=/dev/disk/by-id/scsi-SATA_ST910021AS_5MH0V2PZ-part3 vga=0x314 resume=/dev/sda2 splash=silent BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007eeb0000 (usable) BIOS-e820: 000000007eeb0000 - 000000007eecc000 (ACPI data) BIOS-e820: 000000007eecc000 - 000000007ef00000 (ACPI NVS) BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 519856) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) ACPI: XSDT 7EEBB731, 0094 (r1 LENOVO TP-7L 2100 LTP 0) ACPI: FACP 7EEBB800, 00F4 (r3 LENOVO TP-7L 2100 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 7EEBBC1D, FF1F (r1 LENOVO TP-7L 2100 MSFT 3000000) ACPI: FACS 7EEE4000, 0040 ACPI: SSDT 7EEBB9B4, 0269 (r1 LENOVO TP-7L 2100 MSFT 3000000) ACPI: ECDT 7EECBB3C, 0052 (r1 LENOVO TP-7L 2100 LNVO 1) ACPI: TCPA 7EECBB8E, 0032 (r2 LENOVO TP-7L 2100 LNVO 1) ACPI: APIC 7EECBBC0, 0068 (r1 LENOVO TP-7L 2100 LNVO 1) ACPI: MCFG 7EECBC28, 003C (r1 LENOVO TP-7L 2100 LNVO 1) ACPI: HPET 7EECBC64, 0038 (r1 LENOVO TP-7L 2100 LNVO 1) ACPI: SLIC 7EECBDF0, 0176 (r1 LENOVO TP-7L 2100 LTP 0) ACPI: BOOT 7EECBF66, 0028 (r1 LENOVO TP-7L 2100 LTP 1) ACPI: ASF! 7EECBF8E, 0072 (r16 LENOVO TP-7L 2100 PTL 1) ACPI: SSDT 7EEE271B, 025F (r1 LENOVO TP-7L 2100 INTL 20050513) ACPI: SSDT 7EEE297A, 00A6 (r1 LENOVO TP-7L 2100 INTL 20050513) ACPI: SSDT 7EEE2A20, 04F7 (r1 LENOVO TP-7L 2100 INTL 20050513) ACPI: SSDT 7EEE2F17, 01D8 (r1 LENOVO TP-7L 2100 INTL 20050513) No NUMA configuration found Faking a node at 0000000000000000-000000007eeb0000 Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 519856) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007eeb0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 157 0: 256 -> 519856 On node 0 totalpages: 519757 DMA zone: 56 pages used for memmap DMA zone: 1271 pages reserved DMA zone: 2670 pages, LIFO batch:0 DMA32 zone: 7051 pages used for memmap DMA32 zone: 508709 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:71000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 50296 bytes of per cpu data Built 1 zonelists. Total pages: 511379 Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST910021AS_5MH0V2PZ-part3 vga=0x314 resume=/dev/sda2 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2394.010 MHz processor. Console: colour dummy device 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2040900k/2079424k available (2053k kernel code, 38128k reserved, 1017k data, 316k init) Calibrating delay using timer specific routine.. 4794.44 BogoMIPS (lpj=9588891) Security Framework v1.0.0 initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 4387k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1829 Objects with 81 Devices 475 Methods 33 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 14 Objects with 0 Devices 5 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 14 Objects with 1 Devices 2 Methods 0 Regions tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. result 12465677 Detected 12.465 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4788.17 BogoMIPS (lpj=9576345) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz stepping 0b Brought up 2 CPUs migration_cost=11 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block ACPI: EC: EC description table is found, configuring boot EC Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................................................................................................................................................. Initialized 32/33 Regions 138/138 Fields 64/64 Buffers 55/72 Packages (1888 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.<4>ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ....... Executed 8 _INI methods requiring 2 _STA executions (examined 88 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: d4000000-d6ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: fc000000-fdffffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:1c.1 IO window: 4000-4fff MEM window: dc100000-df2fffff PREFETCH window: dfd00000-dfdfffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-5fff MEM window: d8000000-d9ffffff PREFETCH window: dfa00000-dfafffff PCI: Bridge: 0000:00:1c.3 IO window: 6000-6fff MEM window: d0000000-d1ffffff PREFETCH window: df700000-df7fffff PCI: Bridge: 0000:00:1c.4 IO window: 7000-7fff MEM window: cc000000-cdffffff PREFETCH window: df400000-df4fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00008000-000080ff IO window: 00008400-000084ff PREFETCH window: f4000000-f7ffffff MEM window: 80000000-83ffffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-bfff MEM window: f8100000-fbffffff PREFETCH window: f4000000-f7ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:15:00.0 to 64 NET: Registered protocol family 2 Time: hpet clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 audit: initializing netlink socket (disabled) audit(1205578382.548:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie02] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] Allocate Port Service[0000:00:1c.2:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc20004b80000, using 3750k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 78734 bytes bootsplash: ...found (800x600, 27773 bytes, v3). Console: switching to colour frame buffer device 96x33 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 NET: Registered protocol family 1 Freeing unused kernel memory: 316k freed ACPI: SSDT 7EEE1B32, 0306 (r1 PmRef Cpu0Ist 100 INTL 20050513) Parsing all Control Methods: Table [SSDT](id 00F9) - 6 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7EEE1EBD, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513) Parsing all Control Methods: Table [SSDT](id 00FA) - 16 Objects with 0 Devices 1 Methods 0 Regions Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7EEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) Parsing all Control Methods: Table [SSDT](id 0007) - 4 Objects with 0 Devices 4 Methods 0 Regions ACPI: SSDT 7EEE1E38, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) Parsing all Control Methods: Table [SSDT](id 0008) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (62 C) ACPI: Thermal Zone [THM1] (60 C) SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci ata1: SATA max UDMA/133 cmd 0xffffc20000356100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4345 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST910021AS 4.06 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.11 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi1 : ata_piix scsi2 : ata_piix ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011830 irq 14 ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011838 irq 15 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33 ata2.00: configured for UDMA/33 ata3: port disabled. ignoring. scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U10N 1.05 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb2: SerialNumber: 0000:00:1a.1 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 usb 1-1: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd usb usb3: SerialNumber: 0000:00:1a.7 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb4: SerialNumber: 0000:00:1d.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb5: SerialNumber: 0000:00:1d.1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 usb usb6: new device found, idVendor=0000, idProduct=0000 usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd usb usb6: SerialNumber: 0000:00:1d.2 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: new device found, idVendor=0000, idProduct=0000 usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: EHCI Host Controller usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd usb usb7: SerialNumber: 0000:00:1d.7 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 3 swsusp: Marking nosave pages: 000000000009d000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume usb 1-1: new device found, idVendor=0a5c, idProduct=2110 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: BCM2045B usb 1-1: Manufacturer: Broadcom Corp usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new full speed USB device using uhci_hcd and address 4 kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 1-2: new device found, idVendor=0483, idProduct=2016 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: Biometric Coprocessor usb 1-2: Manufacturer: STMicroelectronics usb 1-2: configuration #1 chosen from 1 choice usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: new device found, idVendor=17ef, idProduct=1003 usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Integrated Smart Card Reader usb 5-2: Manufacturer: Lenovo usb 5-2: configuration #1 chosen from 1 choice IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input3 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:07 failed with error -16 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 thinkpad_acpi: ThinkPad ACPI Extras v0.14 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7LETB0WW (2.10 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad T61p ACPI: AC Adapter [AC] (on-line) ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:15:00.2 to 64 mmc0: SDHCI at 0xf8101800 irq 18 DMA input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input5 ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.0s iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI Copyright (c) 1999-2007 Intel Corporation. ACPI: PCI Interrupt 0000:15:00.1[B] -> <6>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PCI: Setting latency timer of device 0000:15:00.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4] Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels wmaster0: Selected rate control algorithm 'iwl-4965-rs' ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:14:78:94 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff nvidia: module license 'NVIDIA' taints kernel. ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c2000326df2] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Adding 4200988k swap on /dev/sda2. Priority:-1 extents:1 across:4200988k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. AppArmor: AppArmor initialized audit(1205578395.304:2): type=1505 info="AppArmor initialized" pid=2336 IA-32 Microcode Update Driver: v1.14a audit(1205603607.074:3): audit_pid=3115 old=0 by auid=4294967295 input: /usr/sbin/acpi-keys as /class/input/input7 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): wlan0: link is not ready ADDRCONF(NETDEV_UP): eth0: link is not ready Mobile IPv6 /dev/vmmon[3396]: VMCI: Driver initialized. /dev/vmmon[3396]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[3396]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1 /dev/vmmon[3396]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1 /dev/vmmon[3396]: Module vmmon: initialized /dev/vmnet: open called by PID 3457 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 3474 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3473 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 3504 (vmnet-bridge) /dev/vmnet: hub 2 does not exist, allocating memory. /dev/vmnet: port on hub 2 successfully opened bridge-wlan0: enabling the bridge bridge-wlan0: up bridge-wlan0: already up bridge-wlan0: attached /dev/vmnet: open called by PID 3511 (vmnet-netifup) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3526 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 3549 (vmnet-natd) /dev/vmnet: port on hub 8 successfully opened Cisco Systems VPN Client Version 4.8.00 (0490) kernel module loaded bootsplash: status on console 0 changed to on vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present NET: Registered protocol family 17 wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:0d:93:ec:55:9f wlan0: RX authentication from 00:0d:93:ec:55:9f (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:0d:93:ec:55:9f wlan0: RX AssocResp from 00:0d:93:ec:55:9f (capab=0x411 status=0 aid=4) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team wlan0: no IPv6 routers present ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 ACPI: PCI interrupt for device 0000:00:1b.0 disabled ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA /usr/src/packages/BUILD/alsa-driver-hg20080305/pci/hda/hda_codec.c:2321: hda_codec: model 'thinkpad' is selected mpg321[15207]: segfault at 0000000000000000 rip 00000000004068e5 rsp 00007fff788c73b0 error 4