smartctl --all /dev/sda ----------------------- smartctl version 5.37 [i386-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ATA V family Device Model: ST3120023A Serial Number: 3KA15LH1 Firmware Version: 3.30 User Capacity: 120.033.041.920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Sun Mar 16 18:00:39 2008 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 066 055 006 Pre-fail Always - 29360504 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 334 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 369190769 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16142 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1648 194 Temperature_Celsius 0x0022 052 061 000 Old_age Always - 52 195 Hardware_ECC_Recovered 0x001a 066 055 000 Old_age Always - 29360504 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 175 000 Old_age Always - 56 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 87 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 87 occurred at disk power-on lifetime: 6106 hours (254 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8c 30 75 eb Error: UNC at LBA = 0x0b75308c = 192229516 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 8b 30 75 eb 00 00:01:51.567 READ DMA c8 00 48 83 30 75 eb 00 00:01:48.015 READ DMA c8 00 50 7b 30 75 eb 00 00:01:44.447 READ DMA c8 00 58 73 30 75 eb 00 00:01:40.844 READ DMA c8 00 60 6b 30 75 eb 00 00:01:37.269 READ DMA Error 86 occurred at disk power-on lifetime: 6106 hours (254 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8c 30 75 eb Error: UNC at LBA = 0x0b75308c = 192229516 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 83 30 75 eb 00 00:01:48.015 READ DMA c8 00 50 7b 30 75 eb 00 00:01:44.447 READ DMA c8 00 58 73 30 75 eb 00 00:01:40.844 READ DMA c8 00 60 6b 30 75 eb 00 00:01:37.269 READ DMA c8 00 68 63 30 75 eb 00 00:01:33.718 READ DMA Error 85 occurred at disk power-on lifetime: 6106 hours (254 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8c 30 75 eb Error: UNC at LBA = 0x0b75308c = 192229516 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 7b 30 75 eb 00 00:01:44.447 READ DMA c8 00 58 73 30 75 eb 00 00:01:40.844 READ DMA c8 00 60 6b 30 75 eb 00 00:01:37.269 READ DMA c8 00 68 63 30 75 eb 00 00:01:33.718 READ DMA c8 00 70 5b 30 75 eb 00 00:01:30.130 READ DMA Error 84 occurred at disk power-on lifetime: 6106 hours (254 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8c 30 75 eb Error: UNC at LBA = 0x0b75308c = 192229516 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 58 73 30 75 eb 00 00:01:40.844 READ DMA c8 00 60 6b 30 75 eb 00 00:01:37.269 READ DMA c8 00 68 63 30 75 eb 00 00:01:33.718 READ DMA c8 00 70 5b 30 75 eb 00 00:01:30.130 READ DMA c8 00 78 53 30 75 eb 00 00:01:26.533 READ DMA Error 83 occurred at disk power-on lifetime: 6106 hours (254 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 8c 30 75 eb Error: UNC at LBA = 0x0b75308c = 192229516 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 60 6b 30 75 eb 00 00:01:37.269 READ DMA c8 00 68 63 30 75 eb 00 00:01:33.718 READ DMA c8 00 70 5b 30 75 eb 00 00:01:30.130 READ DMA c8 00 78 53 30 75 eb 00 00:01:26.533 READ DMA c8 00 80 4b 30 75 eb 00 00:01:22.971 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5622 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.