ty: Registering secondary module capability [ 18.547578] Capability LSM initialized as secondary [ 18.547585] Mount-cache hash table entries: 512 [ 18.547692] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 18.547700] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 18.547702] CPU: L2 Cache: 512K (64 bytes/line) [ 18.547705] CPU 0(2) -> Core 0 [ 18.547706] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 18.547712] Intel machine check architecture supported. [ 18.547715] Intel machine check reporting enabled on CPU#0. [ 18.547719] Compat vDSO mapped to ffffe000. [ 18.547728] Checking 'hlt' instruction... OK. [ 18.552305] SMP alternatives: switching to UP code [ 18.553376] ACPI: Core revision 20070126 [ 18.962102] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 18.962117] SMP alternatives: switching to SMP code [ 18.963144] Booting processor 1/1 eip 3000 [ 18.971546] Initializing CPU#1 [ 19.031940] Calibrating delay using timer specific routine.. 4000.25 BogoMIPS (lpj=2000125) [ 19.031946] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f 00000000 [ 19.031952] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.031954] CPU: L2 Cache: 512K (64 bytes/line) [ 19.031956] CPU 1(2) -> Core 1 [ 19.031957] AMD C1E detected late. Force timer broadcast. [ 19.031959] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f 00000000 [ 19.031963] Intel machine check architecture supported. [ 19.031965] Intel machine check reporting enabled on CPU#1. [ 19.033808] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 19.033825] Total of 2 processors activated (8003.67 BogoMIPS). [ 19.034064] ENABLING IO-APIC IRQs [ 19.034298] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 19.044379] Brought up 2 CPUs [ 19.044564] net_namespace: 64 bytes [ 19.044972] xor: automatically using best checksumming function: pIII_sse [ 19.049299] pIII_sse : 6092.000 MB/sec [ 19.049301] xor: using function: pIII_sse (6092.000 MB/sec) [ 19.049329] NET: Registered protocol family 16 [ 19.049545] No dock devices found. [ 19.049867] EISA bus registered [ 19.049870] ACPI: bus type pci registered [ 19.049943] PCI: Using MMCONFIG [ 19.049973] PCI: No mmconfig possible on device 00:18 [ 19.050364] Setting up standard PCI resources [ 19.053918] ACPI: EC: Look up EC in DSDT [ 19.055624] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 19.056173] ACPI: Interpreter enabled [ 19.056176] ACPI: (supports S0 S3 S4 S5) [ 19.056188] ACPI: Using IOAPIC for interrupt routing [ 19.055023] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 19.063462] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 19.063465] ACPI: EC: driver started in interrupt mode [ 19.063518] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.064396] PCI: Transparent bridge - 0000:00:08.0 [ 19.064594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.064675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 19.064696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 19.064726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 19.094700] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 19.094892] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 19.095082] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 19.095275] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 19.095464] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 19.095654] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 19.095843] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 19.096032] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 19.096226] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 19.096416] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 19.096606] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 19.096795] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 19.096985] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 19.097175] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 19.097368] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 19.097558] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 19.097746] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 19.097936] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 19.098126] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 19.098256] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.098284] pnp: PnP ACPI init [ 19.098290] ACPI: bus type pnp registered [ 19.099625] pnp: PnP ACPI: found 12 devices [ 19.099628] ACPI: ACPI bus type pnp unregistered [ 19.099631] PnPBIOS: Disabled by ACPI PNP [ 19.099847] SCSI subsystem initialized [ 19.099890] libata version 3.00 loaded. [ 19.100065] usbcore: registered new interface driver usbfs [ 19.100124] usbcore: registered new interface driver hub [ 19.100165] usbcore: registered new device driver usb [ 19.100336] PCI: Using ACPI for IRQ routing [ 19.100339] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.106546] NetLabel: Initializing [ 19.106548] NetLabel: domain hash size = 128 [ 19.106550] NetLabel: protocols = UNLABELED CIPSOv4 [ 19.106559] NetLabel: unlabeled traffic allowed by default [ 19.106566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 19.106570] hpet0: 3 32-bit timers, 25000000 Hz [ 19.107874] ACPI: RTC can wake from S4 [ 19.110185] Time: hpet clocksource has been installed. [ 19.110189] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 19.110192] Could not switch to high resolution mode on CPU 0 [ 19.109520] Clockevents: could not switch to one-shot mode: lapic is not functional. [ 19.109523] Could not switch to high resolution mode on CPU 1 [ 19.110544] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved [ 19.110550] system 00:03: ioport range 0x1000-0x107f has been reserved [ 19.110552] system 00:03: ioport range 0x1080-0x10ff has been reserved [ 19.110555] system 00:03: ioport range 0x1400-0x147f has been reserved [ 19.110558] system 00:03: ioport range 0x1480-0x14ff has been reserved [ 19.110560] system 00:03: ioport range 0x1800-0x187f has been reserved [ 19.110563] system 00:03: ioport range 0x1880-0x18ff has been reserved [ 19.110568] system 00:04: ioport range 0x360-0x361 has been reserved [ 19.110571] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 19.110579] system 00:0b: iomem range 0xffc00000-0xffffffff could not be reserved [ 19.110583] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 19.110586] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 19.110589] system 00:0b: iomem range 0xfed00000-0xfed00fff has been reserved [ 19.110591] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 19.110594] system 00:0b: iomem range 0xfef00000-0xfef00fff has been reserved [ 19.140665] PCI: Bridge: 0000:00:08.0 [ 19.140666] IO window: disabled. [ 19.140671] MEM window: f6100000-f61fffff [ 19.140673] PREFETCH window: disabled. [ 19.140676] PCI: Bridge: 0000:00:0c.0 [ 19.140678] IO window: 4000-4fff [ 19.140681] MEM window: f2000000-f3ffffff [ 19.140683] PREFETCH window: f0000000-f1ffffff [ 19.140685] PCI: Bridge: 0000:00:0d.0 [ 19.140687] IO window: disabled. [ 19.140689] MEM window: f6000000-f60fffff [ 19.140691] PREFETCH window: disabled. [ 19.140701] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 19.140709] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.140715] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.140725] NET: Registered protocol family 2 [ 19.152499] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 19.152785] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.153421] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 19.153773] TCP: Hash tables configured (established 131072 bind 65536) [ 19.153776] TCP reno registered [ 19.156577] checking if image is initramfs... it is [ 19.515490] Freeing initrd memory: 7473k freed [ 19.515578] Simple Boot Flag at 0x36 set to 0x1 [ 19.516331] audit: initializing netlink socket (disabled) [ 19.516341] audit(1205677734.624:1): initialized [ 19.516520] highmem bounce pool size: 64 pages [ 19.516522] Total HugeTLB memory allocated, 0 [ 19.518552] VFS: Disk quotas dquot_6.5.1 [ 19.518577] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 19.518995] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 19.519866] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.520454] NTFS driver 2.1.29 [Flags: R/W]. [ 19.520809] QNX4 filesystem 0.2.3 registered. [ 19.520813] fuse init (API version 7.9) [ 19.521133] JFS: nTxBlock = 8192, nTxLock = 65536 [ 19.523514] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 19.524114] SGI XFS Quota Management subsystem [ 19.524390] aufs 20080121 [ 19.524392] Registering unionfs 2.2.3 (for 2.6.24) [ 19.524677] SELinux: Registering netfilter hooks [ 19.524803] async_tx: api initialized (async) [ 19.524898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 19.524901] io scheduler noop registered [ 19.524903] io scheduler anticipatory registered [ 19.524905] io scheduler deadline registered [ 19.524925] io scheduler cfq registered (default) [ 19.524976] Boot video device is 0000:00:12.0 [ 19.525086] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.525107] assign_interrupt_mode Found MSI capability [ 19.525125] Allocate Port Service[0000:00:0c.0:pcie00] [ 19.525160] Allocate Port Service[0000:00:0c.0:pcie03] [ 19.525216] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.525235] assign_interrupt_mode Found MSI capability [ 19.525249] Allocate Port Service[0000:00:0d.0:pcie00] [ 19.525281] Allocate Port Service[0000:00:0d.0:pcie03] [ 19.553584] lp: driver loaded but no devices found [ 19.553672] Real Time Clock Driver v1.12ac [ 19.553845] hpet_resources: 0xfed00000 is busy [ 19.553877] toshiba: not a supported Toshiba laptop [ 19.560008] ppdev: user-space parallel port driver [ 19.560011] Linux agpgart interface v0.102 [ 19.560258] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d80000, using 3072k, total 131072k [ 19.560260] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 19.560263] vesafb: protected mode interface info at c000:da10 [ 19.560265] vesafb: pmi: set display start = c00cda46, set palette = c00cdab0 [ 19.560267] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 [ 19.560277] vesafb: scrolling: redraw [ 19.560279] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 19.569028] Console: switching to colour frame buffer device 128x48 [ 19.692709] fbcondecor: console 0 using theme 'sabayon' [ 19.722499] fbcondecor: switched decor state to 'on' on console 0 [ 19.721374] fb0: VESA VGA frame buffer device [ 19.721498] input: Power Button (FF) as /class/input/input0 [ 19.726334] ACPI: Power Button (FF) [PWRF] [ 19.726408] input: Sleep Button (CM) as /class/input/input1 [ 19.730326] ACPI: Sleep Button (CM) [SLPB] [ 19.730396] input: Lid Switch as /class/input/input2 [ 19.730682] ACPI: Lid Switch [LID] [ 19.730779] input: Power Button (CM) as /class/input/input3 [ 19.734316] ACPI: Power Button (CM) [PWRB] [ 19.736170] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 19.736177] ACPI: Processor [CPU0] (supports 8 throttling states) [ 19.734597] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 19.734602] ACPI: Processor [CPU1] (supports 8 throttling states) [ 19.737325] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126] [ 19.737415] isapnp: Scanning for PnP cards... [ 20.048590] isapnp: No Plug & Play device found [ 20.048594] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 20.049555] Floppy drive(s): fd0 is 1.44M [ 23.054905] floppy0: no floppy controllers found [ 23.055493] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 23.055780] loop: module loaded [ 23.055782] Compaq SMART2 Driver (v 2.6.0) [ 23.055824] HP CISS Driver (v 3.6.14) [ 23.056061] MM: desc_per_page = 128 [ 23.056222] input: Macintosh mouse button emulation as /class/input/input4 [ 23.056426] Loading iSCSI transport class v2.0-724. [ 23.056781] iscsi: registered transport (tcp) [ 23.057808] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 23.057810] Detecting Adaptec I2O RAID controllers... [ 23.058444] Adaptec aacraid driver 1.1-5[2449]-ms [ 23.058594] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 23.058771] NCR53c406a: no available ports found [ 23.058775] sym53c416.c: Version 1.0.0-ac [ 23.058788] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver [ 23.058951] iscsi: registered transport (qla4xxx) [ 23.058991] QLogic iSCSI HBA Driver [ 23.058993] Emulex LightPulse Fibre Channel SCSI driver 8.2.2 [ 23.058995] Copyright(c) 2004-2007 Emulex. All rights reserved. [ 23.059070] seagate: ST0x/TMC-8xx not detected. [ 23.081861] Failed initialization of WD-7000 SCSI card! [ 23.372412] DC390: clustering now enabled by default. If you get problems load [ 23.372414] with "disable_clustering=1" and report to maintainers [ 23.372492] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 23.372496] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 23.372537] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 [ 23.372619] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 23.372686] GDT-HA: Found 0 PCI Storage RAID Controllers [ 23.372761] 3ware Storage Controller device driver for Linux v1.26.02.002. [ 23.372799] 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. [ 23.372838] nsp32: loading... [ 23.372878] ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007) [ 23.372920] RocketRAID 3xxx SATA Controller driver v1.2 (070830) [ 23.372959] stex: Promise SuperTrak EX Driver version: 3.6.0000.1 [ 23.373001] st: Version 20070203, fixed bufsize 32768, s/g segs 256 [ 23.373032] Driver 'st' needs updating - please use bus_type methods [ 23.373064] osst :I: Tape driver with OnStream support version 0.99.4 [ 23.373066] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 23.373095] Driver 'osst' needs updating - please use bus_type methods [ 23.373158] Driver 'sd' needs updating - please use bus_type methods [ 23.373188] Driver 'sr' needs updating - please use bus_type methods [ 23.373293] ahci 0000:00:09.0: version 3.0 [ 23.373607] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 23.373615] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSI0] -> GSI 23 (level, low) -> IRQ 16 [ 24.372368] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 24.372371] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part [ 24.372375] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 24.372682] scsi2 : ahci [ 24.372763] scsi3 : ahci [ 24.372826] scsi4 : ahci [ 24.372886] scsi5 : ahci [ 24.372971] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 221 [ 24.372974] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221 [ 24.372977] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221 [ 24.372980] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221 [ 24.981839] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.980962] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 24.980965] ata1.00: 488397168 sectors, multi 16: LBA48 [ 24.981914] ata1.00: configured for UDMA/100 [ 25.287240] ata2: SATA link down (SStatus 0 SControl 300) [ 25.591650] ata3: SATA link down (SStatus 0 SControl 300) [ 25.896059] ata4: SATA link down (SStatus 0 SControl 300) [ 25.894495] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 [ 25.894609] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 25.894619] sd 2:0:0:0: [sda] Write Protect is off [ 25.894621] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.894634] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.894679] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 25.894687] sd 2:0:0:0: [sda] Write Protect is off [ 25.894689] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.894701] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.894704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 25.954975] sd 2:0:0:0: [sda] Attached SCSI disk [ 25.955049] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 25.955798] pata_amd 0000:00:06.0: version 0.3.10 [ 25.955840] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 25.955885] scsi6 : pata_amd [ 25.955964] scsi7 : pata_amd [ 25.956257] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 25.956259] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 26.278592] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 26.451190] ata5.00: configured for MWDMA2 [ 26.451215] ata6: port disabled. ignoring. [ 26.451879] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 26.467359] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 26.467362] Uniform CD-ROM driver Revision: 3.20 [ 26.467447] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 26.467520] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 26.469162] I2O subsystem v1.325 [ 26.469164] i2o: max drivers = 8 [ 26.469311] I2O Configuration OSM v1.323 [ 26.469379] I2O Bus Adapter OSM v1.317 [ 26.469410] I2O Block Device OSM v1.325 [ 26.469547] I2O SCSI Peripheral OSM v1.316 [ 26.469578] I2O ProcFS OSM v1.316 [ 26.469611] Fusion MPT base driver 3.04.06 [ 26.469613] Copyright (c) 1999-2007 LSI Corporation [ 26.469618] Fusion MPT SPI Host driver 3.04.06 [ 26.469668] Fusion MPT FC Host driver 3.04.06 [ 26.469717] Fusion MPT SAS Host driver 3.04.06 [ 26.469766] Fusion MPT misc device (ioctl) driver 3.04.06 [ 26.469804] mptctl: Registered with Fusion MPT base driver [ 26.469806] mptctl: /dev/mptctl @ (major,minor=10,220) [ 26.469808] Fusion MPT LAN driver 3.04.06 [ 26.470349] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 26.470359] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 26.522441] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[f6100000-f61007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 26.526660] usbcore: registered new interface driver usblp [ 26.526663] Initializing USB Mass Storage driver... [ 26.526699] usbcore: registered new interface driver usb-storage [ 26.526701] USB Mass Storage support registered. [ 26.526737] usbcore: registered new interface driver libusual [ 26.526823] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 26.554184] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.554190] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.560789] parkbd: no such parport [ 26.568173] mice: PS/2 mouse device common for all mice [ 26.606099] input: AT Translated Set 2 keyboard as /class/input/input5 [ 27.482468] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 27.560765] input: SynPS/2 Synaptics TouchPad as /class/input/input6 [ 27.572623] md: linear personality registered for level -1 [ 27.572625] md: raid0 personality registered for level 0 [ 27.572628] md: raid1 personality registered for level 1 [ 27.572630] md: raid10 personality registered for level 10 [ 27.589201] raid6: int32x1 785 MB/s [ 27.606114] raid6: int32x2 816 MB/s [ 27.623077] raid6: int32x4 753 MB/s [ 27.640113] raid6: int32x8 554 MB/s [ 27.656996] raid6: mmxx1 1625 MB/s [ 27.673971] raid6: mmxx2 2933 MB/s [ 27.690929] raid6: sse1x1 1593 MB/s [ 27.707911] raid6: sse1x2 2792 MB/s [ 27.724874] raid6: sse2x1 2460 MB/s [ 27.741844] raid6: sse2x2 3699 MB/s [ 27.741845] raid6: using algorithm sse2x2 (3699 MB/s) [ 27.741848] md: raid6 personality registered for level 6 [ 27.741850] md: raid5 personality registered for level 5 [ 27.741852] md: raid4 personality registered for level 4 [ 27.741854] md: multipath personality registered for level -4 [ 27.741856] md: faulty personality registered for level -5 [ 27.743597] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 27.743801] EISA: Probing bus 0 at eisa.0 [ 27.743807] Cannot allocate resource for EISA slot 1 [ 27.743812] Cannot allocate resource for EISA slot 3 [ 27.743814] Cannot allocate resource for EISA slot 4 [ 27.743828] EISA: Detected 0 cards. [ 27.743913] cpuidle: using governor ladder [ 28.001091] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b004c55b000] [ 28.742635] cpuidle: using governor menu [ 28.742704] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 28.742776] usbcore: registered new interface driver hiddev [ 28.742809] usbcore: registered new interface driver usbhid [ 28.742812] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 28.742850] Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). [ 28.742892] ALSA device list: [ 28.742893] No soundcards found. [ 28.742970] TCP bic registered [ 28.742989] NET: Registered protocol family 1 [ 28.743005] NET: Registered protocol family 17 [ 28.743169] RPC: Registered udp transport module. [ 28.743171] RPC: Registered tcp transport module. [ 28.741543] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 28.743227] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12 [ 28.743229] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 28.743231] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 28.743233] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 28.743295] Starting balanced_irq [ 28.743307] Using IPI No-Shortcut mode [ 28.743580] registered taskstats version 1 [ 28.743700] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 28.744004] Freeing unused kernel memory: 520k freed [ 29.097897] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 29.097907] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ 17 [ 29.097918] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 29.097921] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 29.098031] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 29.098058] ehci_hcd 0000:00:02.1: debug port 1 [ 29.098062] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 29.098072] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf6489000 [ 29.103836] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.104005] usb usb1: configuration #1 chosen from 1 choice [ 29.104048] hub 1-0:1.0: USB hub found [ 29.104053] hub 1-0:1.0: 7 ports detected [ 29.205033] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 29.205035] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [Z019] -> GSI 22 (level, low) -> IRQ 17 [ 29.205042] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 29.205045] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 29.205145] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 29.205169] ehci_hcd 0000:00:04.1: debug port 1 [ 29.205172] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 29.205177] ehci_hcd 0000:00:04.1: irq 17, io mem 0xf6489400 [ 29.210628] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.210750] usb usb2: configuration #1 chosen from 1 choice [ 29.210790] hub 2-0:1.0: USB hub found [ 29.210795] hub 2-0:1.0: 2 ports detected [ 29.350144] USB Universal Host Controller Interface driver v3.0 [ 29.456554] sl811: driver sl811-hcd, 19 May 2005 [ 29.517052] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 29.644121] usb 2-2: configuration #1 chosen from 1 choice [ 29.840340] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 [ 29.840344] Copyright (c) 1999-2006 Intel Corporation. [ 40.933872] TuxOnIce: Failed to initialise the lzf compression transform. [ 40.934010] TuxOnIce: Normal swapspace found. [ 41.365464] kjournald starting. Commit interval 5 seconds [ 41.365472] EXT3-fs: sda5: orphan cleanup on readonly fs [ 41.377873] ext3_orphan_cleanup: deleting unreferenced inode 3866433 [ 41.555713] ext3_orphan_cleanup: deleting unreferenced inode 3866431 [ 41.579257] ext3_orphan_cleanup: deleting unreferenced inode 3866427 [ 41.629562] EXT3-fs: sda5: 3 orphan inodes deleted [ 41.629563] EXT3-fs: recovery complete. [ 41.676037] EXT3-fs: mounted filesystem with ordered data mode. [ 45.038174] ACPI: Battery Slot [BAT0] (battery present) [ 45.289203] ACPI: AC Adapter [ACAD] (on-line) [ 45.290799] input: Video Bus as /class/input/input7 [ 45.297385] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 45.304441] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 45.304838] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 45.304847] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 45.304860] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 45.304863] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 45.304933] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 45.304948] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 45.352298] ath_hal: no version for "struct_module" found: kernel tainted. [ 45.352495] ath_hal: module license 'Proprietary' taints kernel. [ 45.357365] usb usb3: configuration #1 chosen from 1 choice [ 45.357392] hub 3-0:1.0: USB hub found [ 45.357400] hub 3-0:1.0: 7 ports detected [ 45.383053] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 45.433078] Linux video capture interface: v2.00 [ 45.458535] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 45.458540] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [Z018] -> GSI 18 (level, low) -> IRQ 18 [ 45.458552] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 45.458556] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 45.458625] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 45.458637] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 45.511081] usb usb4: configuration #1 chosen from 1 choice [ 45.511109] hub 4-0:1.0: USB hub found [ 45.511117] hub 4-0:1.0: 2 ports detected [ 45.568720] ricoh-mmc: Ricoh MMC Controller disabling driver [ 45.568724] ricoh-mmc: Copyright(c) Philip Langdale [ 45.611909] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 45.612230] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 45.612239] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 19 [ 45.612245] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 45.612725] wlan: 0.9.4 [ 45.679744] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b015) [ 45.684378] usbcore: registered new interface driver uvcvideo [ 45.684383] USB Video Class driver (v0.1.0) [ 45.696227] ath_pci: 0.9.4 [ 45.840988] sdhci: Secure Digital Host Controller Interface driver [ 45.840991] sdhci: Copyright(c) Pierre Ossman [ 46.317379] input: PC Speaker as /class/input/input8 [ 46.329921] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:1e:68:0d:a1:9e [ 46.329926] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 46.330082] ricoh-mmc: Ricoh MMC controller found at 0000:02:05.2 [1180:0843] (rev 12) [ 46.330090] ricoh-mmc: Controller is now disabled. [ 46.330533] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 46.330542] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, low) -> IRQ 20 [ 46.330552] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 46.358348] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13) [ 46.358363] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 46.358809] sdhci: SDHCI controller found at 0000:02:05.1 [1180:0822] (rev 22) [ 46.359095] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 46.359103] ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 46.359115] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it. [ 46.359160] mmc0: SDHCI at 0xf6100800 irq 7 DMA [ 46.365898] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 46.365906] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 46.365924] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 46.512524] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 46.512535] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LGPU] -> GSI 16 (level, low) -> IRQ 22 [ 46.512543] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 46.512748] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 52.286633] EXT3 FS on sda5, internal journal [ 53.725441] kjournald starting. Commit interval 5 seconds [ 53.727260] EXT3 FS on sda3, internal journal [ 53.727266] EXT3-fs: mounted filesystem with ordered data mode. [ 54.044792] Adding 1052216k swap on /dev/sda6. Priority:-1 extents:1 across:1052216k [ 75.889458] fbcondecor: console 1 using theme 'sabayon' [ 76.023551] fbcondecor: switched decor state to 'on' on console 1 [ 76.166278] fbcondecor: console 2 using theme 'sabayon' [ 76.300568] fbcondecor: switched decor state to 'on' on console 2 [ 76.445310] fbcondecor: console 3 using theme 'sabayon' [ 76.579552] fbcondecor: switched decor state to 'on' on console 3 [ 76.723423] fbcondecor: console 4 using theme 'sabayon' [ 76.858020] fbcondecor: switched decor state to 'on' on console 4 [ 77.009192] fbcondecor: console 5 using theme 'sabayon' [ 77.143415] fbcondecor: switched decor state to 'on' on console 5 [ 78.508468] NET: Registered protocol family 10 [ 78.508968] lo: Disabled Privacy Extensions [ 104.026932] eth0: no IPv6 routers present [ 276.652580] Clocksource tsc unstable (delta = -99103208 ns) [ 675.140135] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 675.169645] usbcore: registered new interface driver ndiswrapper