infinity:/home/ktims# dmesg Bootdata ok (command line is root=/dev/mapper/mainvg-root ro ) Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 17:50:19 UTC 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7790 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef30c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef9b00 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef9a00 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007fef0000 Bootmem setup node 0 0000000000000000-000000007fef0000 On node 0 totalpages: 515870 DMA zone: 3058 pages, LIFO batch:0 DMA32 zone: 512812 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 515870 Kernel command line: root=/dev/mapper/mainvg-root ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2666.699 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2054516k/2096064k available (1927k kernel code, 41160k reserved, 868k data, 176k init) Calibrating delay using timer specific routine.. 5337.89 BogoMIPS (lpj=10675788) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 8333403 Detected 8.333 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5333.85 BogoMIPS (lpj=10667702) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Pentium(R) D CPU 2.66GHz stepping 07 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=940 checking if image is initramfs... it is Freeing initrd memory: 5646k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:06.0 PCI: Transparent bridge - 0000:00:12.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0401 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNPB006 pnp: ACPI device : hid PNPB02F pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: ioport range 0x4000-0x407f could not be reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: match found with the PnP device '00:02' and the driver 'system' pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: match found with the PnP device '00:0d' and the driver 'system' PCI: Bridge: 0000:00:12.0 IO window: a000-afff MEM window: d0000000-d1ffffff PREFETCH window: d2000000-d2ffffff PCI: Setting latency timer of device 0000:00:12.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1205914225.372:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:07' and the driver 'serial' 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 176k freed ACPI: Fan [FAN] (on) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Thermal Zone [THRM] (40 C) input: AT Translated Set 2 keyboard as /class/input/input0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 GSI 16 sharing vector 0xB1 and IRQ 16 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:0b.0 to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0b.0: irq 177, io mem 0xd3003000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 GSI 17 sharing vector 0xB9 and IRQ 17 ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCG] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:0b.1 to 64 ohci_hcd 0000:00:0b.1: OHCI Host Controller ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.1: irq 185, io mem 0xd3004000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 GSI 18 sharing vector 0xC1 and IRQ 18 ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 GSI 19 sharing vector 0xC9 and IRQ 19 ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:0b.2 to 64 ehci_hcd 0000:00:0b.2: EHCI Host Controller ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:0b.2: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:0b.2 ehci_hcd 0000:00:0b.2: irq 201, io mem 0xd3000000 ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 10 ports detected e1000: 0000:01:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:17:31:84:64:e7 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection NFORCE-MCP04: IDE controller at PCI slot 0000:00:0f.0 NFORCE-MCP04: chipset revision 242 NFORCE-MCP04: not 100% native mode: will probe irqs later NFORCE-MCP04: 0000:00:0f.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD1200JB-34EVA0, ATA DISK drive hdb: LG DVD-ROM DRD-8120B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:10.0: version 2.0 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 GSI 20 sharing vector 0xD1 and IRQ 20 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:10.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC800 irq 209 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC808 irq 209 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 1 ata2.00: configured for UDMA/133 Vendor: ATA Model: WDC WD5000AAKS-0 Rev: 12.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD5000AAKS-0 Rev: 12.0 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:11.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xDC00 irq 177 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xDC08 irq 177 scsi2 : sata_nv ata3: SATA link down (SStatus 0 SControl 300) scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) hda: max request size: 512KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb:<6>hdb: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 sdb1 sd 1:0:0:0: Attached scsi disk sdb Probing IDE interface ide1... md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: raid1 personality registered for level 1 md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Attempting manual resume JFS: nTxBlock = 8192, nTxLock = 65536 input: PC Speaker as /class/input/input1 pnp: the driver 'mpu401' has been registered pnp: match found with the PnP device '00:0a' and the driver 'mpu401' pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:08' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100 Adding 1791236k swap on /dev/hda3. Priority:-1 extents:1 across:1791236k loop: loaded (max 8 devices) it87: Found IT8712F chip at 0x290, revision 7 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "dm-4": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-4 Ending clean XFS mount for filesystem: dm-4 Filesystem "dm-3": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-3 Ending clean XFS mount for filesystem: dm-3 e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] eth1: no IPv6 routers present infinity:/home/ktims# ifconfig -a eth1 Link encap:Ethernet HWaddr 00:17:31:84:64:E7 inet addr:192.168.65.1 Bcast:192.168.65.255 Mask:255.255.255.0 inet6 addr: fe80::217:31ff:fe84:64e7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:93 errors:0 dropped:0 overruns:0 frame:0 TX packets:135 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13190 (12.8 KiB) TX bytes:36354 (35.5 KiB) Base address:0xa400 Memory:d1000000-d1020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:162 errors:0 dropped:0 overruns:0 frame:0 TX packets:162 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41787 (40.8 KiB) TX bytes:41787 (40.8 KiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)