Linux version 2.6.24-10 (arcam@main) (gcc version 4.1.2 20071124 (CCux 4.1.2-3)) #1 SMP Sat Mar 15 20:29:00 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f53a0 NX (Execute Disable) protection: active Entering add_active_range(0, 0, 393200) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393200 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 393200 On node 0 totalpages: 393200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1279 pages used for memmap HighMem zone: 162545 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F9280, 0014 (r0 Nvidia) ACPI: RSDT 5FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: FACP 5FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 5FFF3180, 63F4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) ACPI: FACS 5FFF0000, 0040 ACPI: MCFG 5FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) ACPI: APIC 5FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390129 Kernel command line: root=/dev/sda3 ro video=uvesafb:1280x1024-16@75 splash=silent mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2211.352 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1532588k/1572800k available (3860k kernel code, 38960k reserved, 1494k data, 304k init, 655296k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0644000 - 0xc0690000 ( 304 kB) .data : 0xc04c5137 - 0xc063a964 (1494 kB) .text : 0xc0100000 - 0xc04c5137 (3860 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 4423.98 BogoMIPS (lpj=2211991) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 21k freed ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 00 Total of 1 processors activated (4423.98 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 Brought up 1 CPUs net_namespace: 64 bytes sysctl table check failed: /kernel/fbcondecor .1.77 Unknown sysctl binary path Pid: 1, comm: swapper Not tainted 2.6.24-10 #1 [] set_fail+0x3b/0x43 [] sysctl_check_table+0x40f/0x460 [] sysctl_head_finish+0x18/0x21 [] sysctl_check_table+0x423/0x460 [] sysctl_set_parent+0x19/0x2a [] sysctl_init+0x16/0x19 [] kernel_init+0x148/0x2aa [] ret_from_fork+0x6/0x1c [] kernel_init+0x0/0x2aa [] kernel_init+0x0/0x2aa [] kernel_thread_helper+0x7/0x10 ======================= xor: automatically using best checksumming function: pIII_sse pIII_sse : 6784.000 MB/sec xor: using function: pIII_sse (6784.000 MB/sec) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnpacpi: exceeded the max number of mem resources: 12 pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. system 00:01: ioport range 0x4000-0x407f has been reserved system 00:01: ioport range 0x4080-0x40ff has been reserved system 00:01: ioport range 0x4400-0x447f has been reserved system 00:01: ioport range 0x4480-0x44ff has been reserved system 00:01: ioport range 0x4800-0x487f has been reserved system 00:01: ioport range 0x4880-0x48ff has been reserved system 00:02: ioport range 0xb78-0xb7b has been reserved system 00:02: ioport range 0xf78-0xf7b has been reserved system 00:02: ioport range 0xa78-0xa7b has been reserved system 00:02: ioport range 0xe78-0xe7b has been reserved system 00:02: ioport range 0xbbc-0xbbf has been reserved system 00:02: ioport range 0xfbc-0xfbf has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:02: ioport range 0x290-0x30f has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved system 00:0b: iomem range 0xfc000-0xfffff could not be reserved system 00:0b: iomem range 0x5fff0000-0x5fffffff could not be reserved system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved system 00:0b: iomem range 0x0-0x9ffff could not be reserved system 00:0b: iomem range 0x100000-0x5ffeffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: 9000-afff MEM window: f8000000-fcffffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:0b.0 IO window: 8000-8fff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Bridge: 0000:00:0c.0 IO window: 7000-7fff MEM window: fdc00000-fdcfffff PREFETCH window: fdb00000-fdbfffff PCI: Bridge: 0000:00:0d.0 IO window: 6000-6fff MEM window: fda00000-fdafffff PREFETCH window: fd900000-fd9fffff PCI: Bridge: 0000:00:0e.0 IO window: 5000-5fff MEM window: f5000000-f7ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 19585k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1206218663.754:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Loading Reiser4. See www.namesys.com for a description of Reiser4. NTFS driver 2.1.29 [Flags: R/O]. SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem GFS2 (built Mar 15 2008 20:25:22) installed async_tx: api initialized (async) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 Boot video device is 0000:05:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] Real Time Clock Driver v1.12ac uvesafb: NVIDIA Corporation, G70 Board - p317h2 , Chip Rev , OEM: NVIDIA, VBE v3.0 uvesafb: protected mode interface info at c000:d4f0 uvesafb: pmi: set display start = c00cd526, set palette = c00cd590 uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da uvesafb: VBIOS/hardware supports DDC2 transfers Display is GTF capable uvesafb: monitor limits: vf = 76 Hz, hf = 82 kHz, clk = 140 MHz uvesafb: scrolling: ypan using protected mode interface, yres_virtual=9830 Console: switching to colour frame buffer device 160x64 uvesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 24576k, total 262144k fb0: VESA VGA frame buffer device ACPI: Fan [FAN] (on) ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: Thermal Zone [THRM] (22 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) input: Macintosh mouse button emulation as /class/input/input0 Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded DC390: clustering now enabled by default. If you get problems load with "disable_clustering=1" and report to maintainers Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_sil 0000:01:0d.0: version 2.3 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 sata_sil 0000:01:0d.0: Applying R_ERR on DMA activate FIS errata fix scsi0 : sata_sil scsi1 : sata_sil scsi2 : sata_sil scsi3 : sata_sil ata1: SATA max UDMA/100 mmio m1024@0xfcffe000 tf 0xfcffe080 irq 16 ata2: SATA max UDMA/100 mmio m1024@0xfcffe000 tf 0xfcffe0c0 irq 16 ata3: SATA max UDMA/100 mmio m1024@0xfcffe000 tf 0xfcffe280 irq 16 ata4: SATA max UDMA/100 mmio m1024@0xfcffe000 tf 0xfcffe2c0 irq 16 ata1: SATA link down (SStatus 0 SControl 310) ata2: SATA link down (SStatus 0 SControl 310) ata3: SATA link down (SStatus 0 SControl 310) ata4: SATA link down (SStatus 0 SControl 310) sata_nv 0000:00:07.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 17 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 17 ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 17 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7 ata5.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 ata5: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 4:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 4:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: Attached scsi generic sg0 type 0 scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 ata6: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 5:0:0:0: [sdb] Write Protect is off sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 < sdb5 > sdb2 sdb3 sdb4 sd 5:0:0:0: [sdb] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg1 type 0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 18 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi6 : sata_nv scsi7 : sata_nv ata7: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 18 ata8: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 18 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:06.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi8 : pata_amd scsi9 : pata_amd ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14 ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15 ata10.00: ATAPI: HL-DT-ST DVD-RW GWA-4163B, A102, max UDMA/33 ata10.00: configured for UDMA/33 scsi 9:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4163B A102 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 9:0:0:0: Attached scsi CD-ROM sr0 sr 9:0:0:0: Attached scsi generic sg2 type 5 usbmon: debugfs is not available usbcore: registered new interface driver libusual PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 792 MB/s raid6: int32x2 921 MB/s raid6: int32x4 851 MB/s raid6: int32x8 867 MB/s raid6: mmxx1 1847 MB/s raid6: mmxx2 3132 MB/s raid6: sse1x1 1406 MB/s raid6: sse1x2 2312 MB/s raid6: sse2x1 2378 MB/s raid6: sse2x2 3394 MB/s raid6: using algorithm sse2x2 (3394 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' Using IPI No-Shortcut mode Freeing unused kernel memory: 304k freed EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: sda3: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 2015251 ext3_orphan_cleanup: deleting unreferenced inode 2064399 EXT3-fs: sda3: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. lp: driver loaded but no devices found Switched to high resolution mode on CPU 0 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected Linux video capture interface: v2.00 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:04.0 to 64 Linux agpgart interface v0.102 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88/0: cx2388x v4l2 driver version 0.0.6 loaded cx2388x alsa driver version 0.0.6 loaded input: PC Speaker as /class/input/input3 intel8x0_measure_ac97_clock: measured 50588 usecs intel8x0: clocking to 46847 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0a.0 to 64 nvidia: module license 'NVIDIA' taints kernel. usb 2-7: new full speed USB device using ohci_hcd and address 2 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). lp0: console ready rtc_cmos: probe of 00:04 failed with error -16 forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:a3:82:56 forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fcfff000-fcfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 sky2 0000:03:00.0: v1.20 addr 0xfdcfc000 irq 16 Yukon-EC (0xb6) rev 1 sky2 eth1: addr 00:13:d3:a3:93:35 cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected] cx88[0]: TV tuner type 4, Radio tuner type -1 usb 2-7: configuration #1 chosen from 1 choice hub 2-7:1.0: USB hub found hub 2-7:1.0: 4 ports detected tveeprom 2-0050: Hauppauge model 92001, rev C1B1, serial# 1594586 tveeprom 2-0050: MAC address is 00-0D-FE-18-54-DA tveeprom 2-0050: tuner model is Conexant_CX24109 (idx 111, type 4) tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80) tveeprom 2-0050: audio processor is CX883 (idx 32) tveeprom 2-0050: decoder processor is CX883 (idx 22) tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=92001 input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input4 cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 22 cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 22, latency: 32, mmio: 0xf8000000 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 22 cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 22, latency: 32, mmio: 0xfa000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 ACPI: PCI Interrupt 0000:01:07.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 22 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:05:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] cx88[0]/2: cx2388x based DVB/ATSC card DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX24123/CX24109)... usb 2-8: new low speed USB device using ohci_hcd and address 3 Adding 3068404k swap on /dev/sda4. Priority:1 extents:1 across:3068404k usb 2-8: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input5 input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8 usb 2-7.1: new low speed USB device using ohci_hcd and address 4 usb 2-7.1: configuration #1 chosen from 1 choice input: Gaming Keyboard as /class/input/input6 input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:02.0-7.1 input: Gaming Keyboard as /class/input/input7 input,hiddev96,hidraw2: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:02.0-7.1 usb 2-7.4: new full speed USB device using ohci_hcd and address 5 EXT3 FS on sda3, internal journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00009ab7ec] usb 2-7.4: configuration #1 chosen from 1 choice input: G11 Keyboard as /class/input/input8 input,hiddev97,hidraw3: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:02.0-7.4 fuse init (API version 7.9) kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb3, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = 9372324751 ns) Time: acpi_pm clocksource has been installed. eth0: no IPv6 routers present NTFS volume version 3.1. ACPI: PCI interrupt for device 0000:01:07.1 disabled ACPI: PCI interrupt for device 0000:00:04.0 disabled ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50647 usecs intel8x0: clocking to 46901