laurent@portable:~$ dmesg Linux version 2.6.25-rc6.0803242239 (2.6.25-rc6-1~experimental.1~snapshot.10963) (root@portable) (gcc version 4.2.3 (Debian 4.2.3-2)) #1 SMP PREEMPT Mon Mar 24 22:49:31 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fffffc0 (ACPI data) BIOS-e820: 000000003fffffc0 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 1024 bytes. Entering add_active_range(0, 0, 262128) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 262128 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 262128 On node 0 totalpages: 262128 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 255 pages used for memmap HighMem zone: 32497 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000E2010, 0014 (r0 OID_00) ACPI: RSDT 3FFFFBC0, 0030 (r1 INSYDE RSDT_000 1 �& 10007) ACPI: FACP 3FFFFAC0, 0084 (r1 INSYDE FACP_000 100 �& 10007) ACPI: DSDT 3FFFC340, 377F (r1 INSYDE Caiman 1002 INTL 2002036) ACPI: FACS 3FFFFFC0, 0040 ACPI: BOOT 3FFFFB50, 0028 (r1 INSYDE ISC_BOOT 100 �& 10007) ACPI: DBGP 3FFFFB80, 0034 (r1 INSYDE DBGP_000 1 �& 10007) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 Kernel command line: root=UUID=8e556332-6caa-450b-a946-3a655bedaebe ro quiet apic lapic Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! mapped APIC to ffffb000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 3066.358 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033748k/1048512k available (2125k kernel code, 14044k reserved, 826k data, 260k init, 131008k highmem) virtual kernel memory layout: fixmap : 0xfff9c000 - 0xfffff000 ( 396 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03e9000 - 0xc042a000 ( 260 kB) .data : 0xc03136ea - 0xc03e21e0 ( 826 kB) .text : 0xc0100000 - 0xc03136ea (2125 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=128, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 6134.91 BogoMIPS (lpj=3067455) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 10k freed ACPI: Core revision 20070126 ACPI: Override [DSDT- Caiman], this is unsafe: tainting kernel ACPI: Table DSDT replaced by host OS ACPI: DSDT 00000000, 329D (r1 INSYDE Caiman 1002 INTL 20061109) ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"ACPI: setting ELCR to 0200 (from 0860) CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 SMP motherboard not detected. Brought up 1 CPUs net_namespace: 448 bytes NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe8984, last bus=1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: Enabling SiS 96x SMBus ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPCI._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 10) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10) *11 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report system 00:03: iomem range 0xfff80000-0xffffffff could not be reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x480-0x48f has been reserved system 00:05: ioport range 0x680-0x6ff has been reserved system 00:05: ioport range 0x77c-0x77f has been reserved system 00:05: ioport range 0x200-0x20f has been reserved system 00:05: ioport range 0x1000-0x10fe has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: 0xe0000000-0xefffffff PREFETCH window: 0x0000000090000000-0x000000009fffffff PCI: Bus 2, cardbus bridge: 0000:00:09.0 IO window: 0x00001400-0x000014ff IO window: 0x00001800-0x000018ff PREFETCH window: 0x50000000-0x53ffffff MEM window: 0x54000000-0x57ffffff ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 1544k freed Simple Boot Flag at 0x37 set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SBTN] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [LID] ACPI: ACPI0007:00 is registered as cooling_device0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 agpgart: Detected SiS chipset - id:1606 agpgart: AGP aperture is 64M @ 0xf0000000 [drm] Initialized drm 1.1.0 20060810 sis900.c: v1.08.10 Apr. 2 2006 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 0000:00:04.0: ICS LAN PHY transceiver found at address 1. 0000:00:04.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 11, 00:40:d0:50:b0:66 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods pata_sis 0000:00:02.5: version 0.5.2 scsi0 : pata_sis scsi1 : pata_sis ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 Switched to high resolution mode on CPU 0 ata1.00: ATA-7: SAMSUNG HM120JC, YL100-19, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6112, 1M31, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM120JC YL10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R6112 1M31 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: irq 10, io mem 0xf4001000 ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:03.0 to 64 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 6, io mem 0x000d8000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:03.1 to 64 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 5, io mem 0x000da000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device 0000:00:03.2 (0000 -> 0002) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6 ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:03.2 to 64 ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:03.2: irq 6, io mem 0x58000000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 input: AT Translated Set 2 keyboard as /class/input/input3 usb 3-1: new low speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice intel8x0_measure_ac97_clock: measured 50490 usecs intel8x0: clocking to 48000 ALSA device list: #0: SiS SI7012 with ALC202 at irq 5 TCP cubic registered NET: Registered protocol family 1 p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Using IPI Shortcut mode Freeing unused kernel memory: 260k freed udev: renamed network interface eth0 to eth1 input: Microsoft Basic Optical Mouse as /class/input/input4 input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:03.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1c00 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0 input: SynPS/2 Synaptics TouchPad as /class/input/input5 Adding 1421712k swap on /dev/sda5. Priority:-1 extents:1 across:1421712k EXT3 FS on sda1, internal journal loop: module loaded i2c /dev entries driver kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 17 eth1: Media Link On 100mbps full-duplex ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)