SDA === === START OF INFORMATION SECTION === Model Family: Western Digital Caviar RE Serial ATA series Device Model: WDC WD4000YR-01PLB0 Serial Number: WD-WMAMY1569851 Firmware Version: 01.06A01 User Capacity: 400,088,457,216 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 published, ANSI INCITS 397-2005 Local Time is: Mon Mar 24 18:34:24 2008 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10530) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 152) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 222 222 021 Pre-fail Always - 5925 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 28 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10383 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 194 Temperature_Celsius 0x0022 125 120 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 66 - SDD === === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 family Device Model: ST3750640AS Serial Number: 5QD0CYFH Firmware Version: 3.AAK User Capacity: 750,156,374,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Mar 24 18:40:23 2008 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 202) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 089 085 006 Pre-fail Always - 232009739 3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 8 5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail Always - 91 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 259511910 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5587 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 5 187 Unknown_Attribute 0x0032 046 046 000 Old_age Always - 54 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 072 057 045 Old_age Always - 521338908 194 Temperature_Celsius 0x0022 028 043 000 Old_age Always - 28 (Lifetime Min/Max 0/19) 195 Hardware_ECC_Recovered 0x001a 061 048 000 Old_age Always - 84739387 197 Current_Pending_Sector 0x0012 059 059 000 Old_age Always - 841 198 Offline_Uncorrectable 0x0010 059 059 000 Old_age Offline - 841 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 54 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 occurred at disk power-on lifetime: 5586 hours (232 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 37 8d b1 e0 Error: UNC at LBA = 0x00b18d37 = 11636023 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 37 8d b1 e0 00 04:53:22.257 READ DMA EXT 27 00 00 00 00 00 e0 00 04:53:22.251 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 04:53:20.307 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 04:53:20.246 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 04:53:20.242 READ NATIVE MAX ADDRESS EXT Error 53 occurred at disk power-on lifetime: 5586 hours (232 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 37 8d b1 e0 Error: UNC at LBA = 0x00b18d37 = 11636023 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 37 8d b1 e0 00 04:53:22.257 READ DMA EXT 27 00 00 00 00 00 e0 00 04:53:22.251 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 04:53:20.307 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 04:53:20.246 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 04:53:20.242 READ NATIVE MAX ADDRESS EXT Error 52 occurred at disk power-on lifetime: 5586 hours (232 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 37 8d b1 e0 Error: UNC at LBA = 0x00b18d37 = 11636023 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 37 8d b1 e0 00 04:53:16.067 READ DMA EXT 27 00 00 00 00 00 e0 00 04:53:16.062 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 04:53:20.307 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 04:53:20.246 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 04:53:20.242 READ NATIVE MAX ADDRESS EXT Error 51 occurred at disk power-on lifetime: 5586 hours (232 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 37 8d b1 e0 Error: UNC at LBA = 0x00b18d37 = 11636023 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 37 8d b1 e0 00 04:53:16.067 READ DMA EXT 27 00 00 00 00 00 e0 00 04:53:16.062 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 04:53:16.052 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 04:53:15.991 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 04:53:15.985 READ NATIVE MAX ADDRESS EXT Error 50 occurred at disk power-on lifetime: 5586 hours (232 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 37 8d b1 e0 Error: UNC at LBA = 0x00b18d37 = 11636023 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 37 8d b1 e0 00 04:53:16.067 READ DMA EXT 27 00 00 00 00 00 e0 00 04:53:16.062 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 a0 02 04:53:16.052 IDENTIFY DEVICE ef 03 46 00 00 00 a0 02 04:53:15.991 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 e0 00 04:53:15.985 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.