Linux version 2.6.24.3-smp (root@slack) (gcc version 4.2.3) #8 Mon Mar 24 03:57:05 MDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd9800 (usable) BIOS-e820: 000000001ffd9800 - 000000001fff9800 (ACPI NVS) BIOS-e820: 000000001fff9800 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Entering add_active_range(0, 0, 131033) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131033 HighMem 131033 -> 131033 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131033 On node 0 totalpages: 131033 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125946 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000E9A10, 0014 (r0 COMPAQ) ACPI: RSDT 1FFF9840, 0058 (r1 COMPAQ CPQ0040 20020227 0) ACPI: FACP 1FFF98F0, 0074 (r1 COMPAQ BROOKDA 1 0) ACPI: DSDT 1FFF99BE, 134B (r1 COMPAQ DSDT 1 MSFT 100000D) ACPI: FACS 1FFF9800, 0040 ACPI: SSDT 1FFFAD09, 0174 (r1 COMPAQ CORE_UTL 1 MSFT 100000D) ACPI: SSDT 1FFFAE7D, 0CAD (r1 COMPAQ VILLTBL1 1 MSFT 100000D) ACPI: APIC 1FFF9964, 005A (r1 COMPAQ BROOKDA 1 0) ACPI: SSDT 1FFFCADE, 0076 (r1 COMPAQ APIC 1 MSFT 100000D) ACPI: SSDT 1FFFBB2A, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D) ACPI: SSDT 1FFFC235, 01A4 (r1 COMPAQ S3 1 MSFT 100000D) ACPI: SSDT 1FFFC3D9, 0158 (r1 COMPAQ PIDETM 1 MSFT 100000D) ACPI: SSDT 1FFFC68E, 010B (r1 COMPAQ GTF0 1 MSFT 100000D) ACPI: SSDT 1FFFC799, 0117 (r1 COMPAQ GTF1 1 MSFT 100000D) ACPI: SSDT 1FFFC531, 015D (r1 COMPAQ SIDETM 1 MSFT 100000D) ACPI: SSDT 1FFFC8B0, 0117 (r1 COMPAQ GTF2 1 MSFT 100000D) ACPI: SSDT 1FFFCC3D, 004E (r1 COMPAQ FINIS 1 MSFT 100000D) ACPI: PM-Timer IO Port: 0xf808 Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130010 Kernel command line: root=/dev/hda2 ro vga=773 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1994.183 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 515552k/524132k available (2225k kernel code, 7984k reserved, 837k data, 192k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe9000 - 0xfffff000 ( 88 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdffd9000 ( 511 MB) .init : 0xc0400000 - 0xc0430000 ( 192 kB) .data : 0xc032c4b4 - 0xc03fd924 ( 837 kB) .text : 0xc0100000 - 0xc032c4b4 (2225 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 3991.67 BogoMIPS (lpj=7983348) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c20) net_namespace: 64 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xebb57, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region fa00-fa3f claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. system 00:0c: ioport range 0x4d0-0x4d1 has been reserved system 00:0d: ioport range 0x400-0x41f has been reserved system 00:0d: ioport range 0x420-0x43f has been reserved system 00:0d: ioport range 0x440-0x45f has been reserved system 00:0d: ioport range 0x460-0x47f has been reserved system 00:0d: ioport range 0xf800-0xf81f has been reserved system 00:0d: ioport range 0xf820-0xf83f has been reserved system 00:0d: ioport range 0xf840-0xf85f has been reserved system 00:0d: ioport range 0xf860-0xf87f has been reserved system 00:0d: ioport range 0xfa00-0xfa3f has been reserved system 00:0d: ioport range 0xfc00-0xfc7f has been reserved system 00:0d: ioport range 0xfc80-0xfcff has been reserved system 00:0d: ioport range 0xfe00-0xfe7f has been reserved system 00:0d: ioport range 0xfe80-0xfeff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xe8000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0x200fffff could not be reserved system 00:0e: iomem range 0xfff80000-0xffffffff could not be reserved system 00:0e: iomem range 0xfeea0000-0xfeebffff could not be reserved system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0e: iomem range 0xd1000-0xd3fff has been reserved system 00:0e: iomem range 0xffb80000-0xffbfffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f9000000-fa1fffff PREFETCH window: f0000000-f81fffff PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: e4000000-ebdfffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 1536k, total 131072k vesafb: mode is 1024x768x8, linelength=1024, pages=3 vesafb: protected mode interface info at c000:e4c0 vesafb: pmi: set display start = c00ce4f6, set palette = c00ce560 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller (0x8086:0x244b rev 0x05) at PCI slot 0000:00:1f.1 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2480-0x2487, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x2488-0x248f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hdb: ST380021A, ATA DISK drive hda: WDC WD3200AAJB-00TYA0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVDRRW GSA-H20L, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/33 mode selected ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdb: cache flushes not supported hdb: hdb1 hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide Driver 'sd' needs updating - please use bus_type methods PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 5, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected rtc_cmos: probe of 00:03 failed with error -16 Linux agpgart interface v0.102 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 11, io base 0x00002460 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: Processor [CPU0] (supports 8 throttling states) input: Power Button (FF) as /devices/virtual/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/virtual/input/input2 agpgart: Detected an Intel 845G Chipset. agpgart: AGP aperture is 64M @ 0xec000000 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ACPI: Power Button (CM) [PBTN] usb 1-2: new low speed USB device using uhci_hcd and address 2 usb 1-2: configuration #1 chosen from 1 choice e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation 8139too Fast Ethernet driver 0.9.28 Linux video capture interface: v2.00 nvidia: module license 'NVIDIA' taints kernel. intel8x0_measure_ac97_clock: measured 52937 usecs intel8x0: clocking to 41149 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 e100: eth0: e100_probe: addr 0xebb04000, irq 5, MAC addr 00:08:02:3f:8f:07 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 eth1: RealTek RTL8139 at 0x1000, 00:10:b5:aa:0c:6b, IRQ 10 eth1: Identified 8139 chip type 'RTL-8139B' ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[ebb05000-ebb057ff] Max Packet=[2048] IR/IT contexts=[4/8] cx18: Start initialization, version 0.1.0 cx18-0: Initializing card #0 cx18-0: Autodetected Hauppauge card ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 cx18-0: cx23418 revision 01010000 (B) i2c-adapter i2c-0: adapter [cx18 i2c driver #0-0] registered i2c-adapter i2c-1: adapter [cx18 i2c driver #0-1] registered i2c-adapter i2c-0: master_xfer[0] W, addr=0x50, len=1 i2c-adapter i2c-0: NAK from device addr 0x50 msg #0 tveeprom 0-0050: Huh, no eeprom present (err=-121)? tveeprom 0-0050: Encountered bad packet header [4c]. Corrupt or not a Hauppauge eeprom. cx18-0: Invalid EEPROM i2c-core: driver [tuner'] registered i2c-core: driver [tuner] registered i2c-core: driver [cs5345] registered i2c-adapter i2c-1: Probing failed, no device found i2c-adapter i2c-1: master_xfer[0] W, addr=0x43, len=0 i2c-adapter i2c-1: client [] registered with bus id 1-0043 i2c 1-0043: uevent tuner 1-0043: probe i2c-adapter i2c-1: master_xfer[0] W, addr=0x43, len=1 i2c-adapter i2c-1: master_xfer[0] R, addr=0x43, len=8 tuner 1-0043: chip found @ 0x86 (cx18 i2c driver #0-1) tda9887 1-0043: tda988[5/6/7] found i2c-adapter i2c-1: master_xfer[0] W, addr=0x43, len=4 i2c-adapter i2c-1: master_xfer[0] W, addr=0x61, len=0 i2c-adapter i2c-1: client [] registered with bus id 1-0061 i2c 1-0061: uevent tuner 1-0061: probe tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) i2c-adapter i2c-0: client [] registered with bus id 0-004c i2c 0-004c: uevent cs5345 0-004c: probe cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) i2c-adapter i2c-0: master_xfer[0] W, addr=0x4c, len=2 i2c-adapter i2c-0: NAK from device addr 0x4c msg #0 i2c-adapter i2c-0: master_xfer[0] W, addr=0x4c, len=2 i2c-adapter i2c-0: NAK from device addr 0x4c msg #0 i2c-adapter i2c-0: master_xfer[0] W, addr=0x4c, len=2 i2c-adapter i2c-0: NAK from device addr 0x4c msg #0 cx18-0: Disabled encoder IDX device cx18-0: Registered device video0 for encoder MPEG (2 MB) cx18-0: Registered device video16 for TS (1 MB) cx18_reg_dev() Calling DVB Register cx18_dvb_register() DVB: registering new adapter (cx18) dvb_register() i2c-adapter i2c-0: master_xfer[0] W, addr=0x19, len=1 i2c-adapter i2c-0: master_xfer[1] R, addr=0x19, len=2 i2c-adapter i2c-0: NAK from device addr 0x19 msg #0 s5h1409_readreg: readreg error (ret == -121) cx18: frontend initialization failed cx18_reg_dev() DVB failed to register cx18-0: Registered device video32 for encoder YUV (2 MB) cx18-0: Registered device vbi0 for encoder VBI (1 MB) cx18-0: Registered device video24 for encoder PCM audio (1 MB) cx18-0: Registered device radio0 for encoder radio cx18-0: Initialized card #0: Hauppauge HVR-1600 cx18: End initialization ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.01 Wed Sep 5 19:12:23 PDT 2007 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010b500000654c3] usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input3 udev: renamed network interface eth1 to eth0 input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver udev: renamed network interface eth0_rename to eth1 Adding 1461872k swap on /dev/hda1. Priority:-1 extents:1 across:1461872k EXT3 FS on hda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode.