cat /var/log/dmesg
Linux version 2.6.24-gentoo-r3 (root@silverstone) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #2 Fri Mar 21 09:24:33 CDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
 BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fffc000 (usable)
 BIOS-e820: 000000007fffc000 - 000000007ffff000 (ACPI data)
 BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 524284) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   524284
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   524284
On node 0 totalpages: 524284
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2303 pages used for memmap
  HighMem zone: 292605 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI 2.3 present.
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520189
Kernel command line: root=/dev/hda3 CONSOLE=/dev/tty1  noapic nolapic pci=noacpi acpi=off
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1533.530 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074860k/2097136k available (2657k kernel code, 21160k reserved, 835k data, 168k init, 1179632k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffee000 - 0xfffff000   (  68 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc046c000 - 0xc0496000   ( 168 kB)
      .data : 0xc0398796 - 0xc04696ec   ( 835 kB)
      .text : 0xc0100000 - 0xc0398796   (2657 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3069.53 BogoMIPS (lpj=5114448)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(TM) XP 1800+ stepping 02
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
net_namespace: 64 bytes
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf17e0, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3147] at 0000:00:11.0
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: db000000-dbffffff
  PREFETCH window: e7700000-efffffff
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: dc000000-e76fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
io scheduler noop registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
loop: module loaded
8139too Fast Ethernet driver 0.9.28
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:10.0
IRQ routing conflict for 0000:00:06.0, have irq 4, want irq 11
IRQ routing conflict for 0000:00:10.0, have irq 4, want irq 11
eth0: RealTek RTL8139 at 0xa800, 00:10:b5:5f:58:be, IRQ 4
eth0:  Identified 8139 chip type 'RTL-8139B'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20276: IDE controller (0x105a:0x5275 rev 0x01) at  PCI slot 0000:00:06.0
PCI: Found IRQ 11 for device 0000:00:06.0
IRQ routing conflict for 0000:00:06.0, have irq 4, want irq 11
IRQ routing conflict for 0000:00:10.0, have irq 4, want irq 11
PDC20276: PLL input clock is 16654 kHz
PDC20276: 100% native mode on irq 4
    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: IC35L180AVV207-1, ATA DISK drive
hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hde: UDMA/100 mode selected
ide2 at 0xd400-0xd407,0xd002 on irq 4
Probing IDE interface ide3...
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at  PCI slot 0000:00:11.1
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hdb: Maxtor 6B100P0, ATA DISK drive
hda: IC35L180AVV207-1, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/133 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hde: max request size: 512KiB
hde: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63
hde: cache flushes supported
 hde: hde1
hda: max request size: 512KiB
hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 195813072 sectors (100256 MB) w/8192KiB Cache, CHS=65535/16/63
hdb: cache flushes supported
 hdb: hdb1
USB Universal Host Controller Interface driver v3.0
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
md: raid0 personality registered for level 0
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: Scanned 2 and added 2 devices.
md: autorun ...
md: considering hdb1 ...
md:  adding hdb1 ...
md:  adding hde1 ...
md: created md1
md: bind<hde1>
md: bind<hdb1>
md: running: <hdb1><hde1>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at hdb1
raid0:   comparing hdb1(97906432) with hdb1(97906432)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at hde1
raid0:   comparing hde1(180939968) with hdb1(97906432)
raid0:   NOT EQUAL
raid0:   comparing hde1(180939968) with hde1(180939968)
raid0:   END
raid0:   ==> UNIQUE
raid0: 2 zones
raid0: FINAL 2 zones
raid0: zone 1
raid0: checking hdb1 ... nope.
raid0: checking hde1 ... contained as device 0
  (180939968) is smallest!.
raid0: zone->nb_dev: 1, size: 83033536
raid0: current zone offset: 180939968
raid0: done.
raid0 : md_size is 278846400 blocks.
raid0 : conf->hash_spacing is 195812864 blocks.
raid0 : nb_zone is 2.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:05.0
nvidia: module license 'NVIDIA' taints kernel.
PCI: setting IRQ 12 as level-triggered
PCI: Found IRQ 12 for device 0000:01:00.0
IRQ routing conflict for 0000:01:00.0, have irq 11, want irq 12
NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.05  Tue Jan 22 19:36:58 PST 2008
Linux video capture interface: v2.00
ivtv:  Start initialization, version 1.1.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23416 based)
tveeprom 1-0050: Hauppauge model 23552, rev D592, serial# 2994690
tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
ivtv0: Autodetected WinTV PVR 500 (unit #1)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0043: type set to tda9887
TEA5767 detected.
tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
tea5767 1-0060: type set to Philips TEA5767HN FM Radio
tuner 1-0060: type set to tea5767
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
tuner-simple 1-0061: type set to 57 (Philips FQ1236A MK4)
tuner 1-0061: type set to Philips FQ1236A MK4
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23416 based)
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0043: type set to tda9887
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 2-0050: Hauppauge model 23552, rev D592, serial# 2994690
tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
tuner-simple 2-0061: type set to 57 (Philips FQ1236A MK4)
tuner 2-0061: type set to Philips FQ1236A MK4
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)
ivtv:  End initialization
EXT3 FS on hda3, internal journal
Adding 987988k swap on /dev/hda2.  Priority:-1 extents:1 across:987988k