Title: Asus U3S Install Guide

--

In this topic you can see how to get OSX fully working on the Asus U3S.

[img="http://www.ewaggle.com/v/vspfiles/photos/u3s-a1b-2.jpg"]

1. Specs

[b]CPU:[/b] Intel Core2Duo
[b]Memory:[/b] 1,5 Gb
[b]Graphics (power saving):[/b] Intel X3100
[b]Graphics (speed):[/b] nVidia G8400M
[b]Hard Drive:[/b] 160Gb  
[b]DVD Drive:[/b] DVD RW, CD RW
[b]Display:[/b] 13.3" (1280x800)
[b]Network (ethernet):[/b] Realtek 8111/8168B
[b]Network (wifi):[/b] Intel 4965 a/b/g/n
[b]Sound:[/b] Intel 82801H 

2. What you'll need

- iAtkos v1.0r2 (md5:)
- Kalyway 10.5.2 Combo updater (md5:)
- Apple Leopard graphics update (md5:)
- Modded BIOS (md5:)

3. Flashing the BIOS

To make OSX work on this laptop, you'll need to flash your BIOS. This can be done in windows vista, or with a USB stick.
We'll flash is using a USB stick, since some of you might not have vista.
So, format the USB stick to FAT format and copy over the BIOS file ( don't forget to extract it first!).
Then boot your laptop, hold F4 and you'll get into Asus Easy Flash Utility.
Use arrows to select your BIOS file, press enter to select it.
Make sure you have enough battery left, and don't power off the laptop until flashing the BIOS is complete.

4. Configure the BIOS to boot from DVD

Get into the BIOS by pressing F2 at boot

Boot>Boot Device Priority
1. CD/DVD
2. Hard Drive

5. Install iAtkos

Just burn the image to a dvd using your favorite ISO burning tool, burn it at a lower speed to be sure the image is burnt correctly.
Boot the laptop with the dvd, wait till installer shows up.
Select: 
- Drivers > VGA > GMAX 3100
- Patches ?


6. Update to 10.5.2

7. Install Vanilla Kernel

8. Install graphics update

9. Update kernel

10. Install drivers

Wifi driver isn't ready yet, but there's hope. iwidarwin project..