94907740   <== acxpci_l_clean_txdesc: 00000001
94907740 <== acx_interrupt_tasklet
94907745 ==> acx_net_config
94907745   ==> acx_selectchannel
Changing to channel 10
94907745   <== acx_selectchannel: FFFFFF8D
94907745   ==> acx_s_update_card_settings
get_mask 0x00000000, set_mask 0x00008000
updating channel to: 10
updating: enable Tx
94907745     ==> acxpci_s_issue_cmd_timeo_debug
issue_cmd(cmd:ACX1xx_CMD_ENABLE_TX,buflen:1,timeout:50ms,type:0x410A)
input buffer (len=1):
94907745       ==> acx_dump_bytes
0A
94907745       <== acx_dump_bytes
94907745       ==> acxpci_read_cmd_type_status
cmd_type:0000 cmd_status:0000 [Idle]
94907745       <== acxpci_read_cmd_type_status: 00000000
94907745       ==> acxpci_write_cmd_type_status
94907746       <== acxpci_write_cmd_type_status
94907746       ==> acx_s_mwait
94907746       ==> acxpci_i_interrupt
got Command_Complete IRQ
94907746       <== acxpci_i_interrupt
94907748       <== acx_s_mwait
94907748       ==> acxpci_read_cmd_type_status
cmd_type:0004 cmd_status:0001 [Success]
94907749       <== acxpci_read_cmd_type_status: 00000001
94907749       ==> acxpci_write_cmd_type_status
94907749       <== acxpci_write_cmd_type_status
issue_cmd(ACX1xx_CMD_ENABLE_TX): took 4 jiffies to complete
94907749     <== acxpci_s_issue_cmd_timeo_debug: 00000000
FIXME: Possibly broken code in acx_s_update_card_settings() at /home/devel/acx-mac80211/common.c:3793
updating: enable Rx on channel: 10