htpc ~ # dmesg Linux version 2.6.24-gentoo-r3 (root@htpc) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #1 SMP Mon Mar 31 14:17:50 CDT 2008 Command line: root=/dev/hda3 video=uvesafb:800x600-32@60,mtrr,ywrap splash=silent,fadein,theme:gentoo console=tty1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS) BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data) BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0001000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 261856) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000F7790, 0024 (r2 K8T890) ACPI: XSDT 3FEE30C0, 0044 (r1 K8T890 AWRDACPI 42302E31 AWRD 0) ACPI: FACP 3FEEA100, 00F4 (r3 K8T890 AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 3FEE3240, 6E57 (r1 K8T890 AWRDACPI 1000 MSFT 100000E) ACPI: FACS 3FEE0000, 0040 ACPI: SSDT 3FEEA300, 0118 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG 3FEEA480, 003C (r1 K8T890 AWRDACPI 42302E31 AWRD 0) ACPI: APIC 3FEEA240, 0074 (r1 K8T890 AWRDACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 CPU has 1 num_cores No NUMA configuration found Faking a node at 0000000000000000-000000003fee0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 261856) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000003fee0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 261856 On node 0 totalpages: 261759 DMA zone: 56 pages used for memmap DMA zone: 1617 pages reserved DMA zone: 2326 pages, LIFO batch:0 DMA32 zone: 3524 pages used for memmap DMA32 zone: 254236 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000) SMP: Allowing 2 CPUs, 1 hotplug CPUs PERCPU: Allocating 33376 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 256562 Policy zone: DMA32 Kernel command line: root=/dev/hda3 video=uvesafb:800x600-32@60,mtrr,ywrap splash=silent,fadein,theme:gentoo console=tty1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 2400.080 MHz processor. Console: colour VGA+ 80x25 console [tty1] enabled Checking aperture... CPU 0: aperture @ fed8000000 size 128 MB Aperture beyond 4GB. Ignoring. AGP bridge at 00:00:00 Aperture from AGP @ d8000000 size 128 MB (APSIZE f20) Memory: 1025232k/1047424k available (3367k kernel code, 21804k reserved, 1886k data, 340k init) Calibrating delay using timer specific routine.. 4806.00 BogoMIPS (lpj=9612001) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12500429 Detected 12.500 MHz APIC timer. Brought up 1 CPUs CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 net_namespace: 120 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.2 PCI: Cannot allocate resource region 8 of bridge 0000:00:03.3 agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 128M @ 0xd8000000 Time: tsc clocksource has been installed. system 00:01: ioport range 0x400-0x47f has been reserved system 00:01: ioport range 0x500-0x50f has been reserved system 00:02: iomem range 0x10000000-0x10000fff could not be reserved system 00:03: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0x290-0x29f has been reserved system 00:03: ioport range 0x800-0x805 has been reserved system 00:03: ioport range 0x290-0x297 has been reserved system 00:0c: iomem range 0xe0000000-0xf0000fff could not be reserved system 00:0d: iomem range 0xcee00-0xcffff has been reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0x3fef0000-0x3ffeffff could not be reserved system 00:0d: iomem range 0x3fee0000-0x3fefffff could not be reserved system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0x3fedffff could not be reserved system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0d: iomem range 0xfff80000-0xfffeffff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: fa000000-fcffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:07:00.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fde00000-fdefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: disabled. MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 35 (level, low) -> IRQ 35 PCI: Setting latency timer of device 0000:00:03.1 to 64 ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 39 (level, low) -> IRQ 39 PCI: Setting latency timer of device 0000:00:03.2 to 64 ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 43 (level, low) -> IRQ 43 PCI: Setting latency timer of device 0000:00:03.3 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:07:00.0 to 64 ACPI: PCI Interrupt 0000:07:00.1[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:07:00.1 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 578k freed Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. Boot video device is 0000:02:00.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] Allocate Port Service[0000:00:02.0:pcie02] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] Allocate Port Service[0000:00:03.0:pcie02] Allocate Port Service[0000:00:03.0:pcie03] PCI: Setting latency timer of device 0000:00:03.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.1:pcie00] Allocate Port Service[0000:00:03.1:pcie01] Allocate Port Service[0000:00:03.1:pcie02] Allocate Port Service[0000:00:03.1:pcie03] PCI: Setting latency timer of device 0000:00:03.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.2:pcie00] Allocate Port Service[0000:00:03.2:pcie01] Allocate Port Service[0000:00:03.2:pcie02] Allocate Port Service[0000:00:03.2:pcie03] PCI: Setting latency timer of device 0000:00:03.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.3:pcie00] Allocate Port Service[0000:00:03.3:pcie01] Allocate Port Service[0000:00:03.3:pcie02] Allocate Port Service[0000:00:03.3:pcie03] PCI: Setting latency timer of device 0000:07:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:00.0:pcie00] Allocate Port Service[0000:07:00.0:pcie01] Allocate Port Service[0000:07:00.0:pcie03] PCI: Setting latency timer of device 0000:07:00.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:00.1:pcie00] Allocate Port Service[0000:07:00.1:pcie01] Allocate Port Service[0000:07:00.1:pcie03] Evaluate _OSC returns wrong type AER service couldn't init device 0000:00:02.0:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:00:03.0:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:00:03.1:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:00:03.2:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:00:03.3:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:07:00.0:pcie01 - Run ACPI _OSC fails Evaluate _OSC returns wrong type AER service couldn't init device 0000:07:00.1:pcie01 - Run ACPI _OSC fails Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI: Thermal Zone [THRM] (40 C) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 eth0: VIA Rhine II at 0x1f400, 00:15:f2:2d:2b:0d, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfa00-0xfa07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfa08-0xfa0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hdb: IRQ probe failed (0xfffffffffffffcfe) hdb: IRQ probe failed (0xfffffffffffffcfe) hda: SAMSUNG SP0411N, ATA DISK drive hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 Fusion MPT SAS Host driver 3.04.06 ieee1394: raw1394: /dev/raw1394 device initialized Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 340k freed USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: irq 22, io mem 0xfdffe000 usb 1-2: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:07:01.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 24 PCI: Setting latency timer of device 0000:02:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008 usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice lirc_dev: IR Remote Control driver registered, major 61 lirc_atiusb: USB remote driver for LIRC $Revision: 1.66 $ lirc_atiusb: Paul Miller usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Link keybd as /class/input/input2 input: USB HID v1.10 Keyboard [Link keybd] on usb-0000:00:10.1-1 input: Link keybd as /class/input/input3 input: USB HID v1.10 Mouse [Link keybd] on usb-0000:00:10.1-1 lirc_dev: lirc_register_plugin: sample_rate: 0 lirc_atiusb[3]: on usb1:3 usbcore: registered new interface driver lirc_atiusb EXT3 FS on hda3, internal journal Adding 2048276k swap on /dev/hda2. Priority:-1 extents:1 across:2048276k eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: no IPv6 routers present