# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "gb"
    Option         "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "Synaptics Touchpad"
    Driver         "synaptics"
    Option         "SendCoreEvents" "true"
    Option         "Device" "/dev/psaux"
    Option         "Protocol" "auto-dev"
    Option         "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    ModelName      "Custom 1"
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    ModeLine       "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    ModeLine       "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    ModeLine       "2048x1536@60" 266.9 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
EndSection

Section "Monitor"

 # 
    Identifier     "monitor1"
    VendorName     "Dell"
    ModelName      "Dell 2407WFP (Digital)"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Gamma           1
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "1280x768@60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
    ModeLine       "1280x720@60" 74.5 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
    ModeLine       "1280x800@75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
    ModeLine       "1280x768@75" 103.0 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
    ModeLine       "1280x800@60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    ModeLine       "1440x900@75" 136.5 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
    ModeLine       "1440x900@60" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
    ModeLine       "1600x1024@60" 136.4 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
    ModeLine       "1680x1050@60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1680x1050@75" 188.1 1680 1800 1984 2288 1050 1051 1054 1096 -hsync +vsync
    ModeLine       "1920x1200@60" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
    ModeLine       "1920x1600@60" 193.2 1920 2048 2256 2592 1200 1201 1204 1242 -hsync +vsync
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL 2405FPW"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation G80 [Quadro FX 570M]"
    Driver         "nvidia"
    BoardName      "nv"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"

 # 
    Identifier     "device1"
    Driver         "nvidia"
    BoardName      "nv"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro FX 570M"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation G80 [Quadro FX 570M]"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Virtual     2048 1536
        Depth       24
        Modes      "1920x1440@60" "2048x1536@60" "1856x1392@60" "1792x1344@60" "1600x1200@60" "1400x1050@60" "1280x1024@60" "1280x960@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
    EndSubSection
EndSection

Section "Screen"

 # 
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1920x1600@60" "1920x1200@60" "1680x1050@75" "1680x1050@60" "1600x1024@60" "1440x900@60" "1440x900@75" "1280x800@60" "1280x768@75" "1280x800@75" "1280x720@60" "1280x768@60" "800x600@60" "800x600@75" "800x600@72" "800x600@56"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "TwinView" "0"
# Removed Option "metamodes" "nvidia-auto-select +0+0; 1400x1050@60 +0+0; 1280x1024@60 +0+0"
# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +0+0"
# Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0, DFP: nvidia-auto-select +0+0"
EndSection