Linux version 2.6.9-34.0.1.EL (buildcentos@build-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed May 24 07:40:56 CDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fbf0000 (usable)
 BIOS-e820: 000000000fbf0000 - 000000000fbf8000 (ACPI data)
 BIOS-e820: 000000000fbf8000 - 000000000fc00000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
251MB LOWMEM available.
Using x86 segment limits to approximate NX protection
zapping low mappings.
On node 0 totalpages: 64496
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 60400 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.1 present.
ACPI: RSDP (v000 Acer                                  ) @ 0x000fe030
ACPI: RSDT (v001 Acer   V76M     0x00000001 Acer 0x00000000) @ 0x0fbf0000
ACPI: FADT (v001 Acer   V76M     0x00000001 Acer 0x00000000) @ 0x0fbf0028
ACPI: DSDT (v001   Acer   V76M   0x00001000 MSFT 0x0100000a) @ 0x00000000
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Built 1 zonelists
Kernel command line: ro root=LABEL=/1
Initializing CPU#0
CPU 0 irqstacks, hard=c03e7000 soft=c03e6000
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 466.805 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 251320k/257984k available (2118k kernel code, 6012k reserved, 668k data, 144k init, 0k highmem)
Calibrating delay using timer specific routine.. 934.76 BogoMIPS (lpj=467380)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps:        0183f1ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 384k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:00.1
PCI: Using IRQ router SIS [1039/0008] at 0000:00:01.0
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1153661648.882:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C75A858BA4956D41
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 620 chipset
agpgart: Maximum main memory to use for agp memory: 199M
agpgart: AGP aperture is 64M @ 0xe0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS620 ATA 66 controller
    ide0: BM-DMA at 0x9420-0x9427, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x9428-0x942f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IBM-DPTA-371360, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 26712000 sectors (13676 MB) w/1961KiB Cache, CHS=26500/16/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 4681)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1335659
EXT3-fs: hda2: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
inserting floppy driver for 2.6.9-34.0.1.EL
FDC 0 is a post-1991 82077
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Found IRQ 10 for device 0000:00:09.0
divert: allocating divert_blk for eth0
eth0: VIA Rhine II at 0x80100000, 00:50:ba:14:5f:61, IRQ 10.
eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 0021.
PCI: Found IRQ 5 for device 0000:00:0c.0
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Found IRQ 9 for device 0000:00:01.2
ohci_hcd 0000:00:01.2: OHCI Host Controller
ohci_hcd 0000:00:01.2: irq 9, pci mem d0836000
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda2, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 779144k swap on /dev/hda3.  Priority:-1 extents:1
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
Zapata Telephony Interface Registered on major 196
Zaptel Version:  Echo Canceller: MG2
Registered Tormenta2 PCI
PCI: Found IRQ 11 for device 0000:00:0d.0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X100P
Registered tone zone 0 (United States / North America)
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0378f60(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
[root@asterisk1 ~]#