[root@localhost ~]# smartctl --all /dev/hdd smartctl version 5.36 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3250824A Serial Number: 4ND2KCJE Firmware Version: 3.AAE User Capacity: 250�059�350�016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Apr 7 14:37:20 2008 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 117 088 006 Pre-fail Always - 145375841 3 Spin_Up_Time 0x0003 100 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 388 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 483702204 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9272 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 518 187 Unknown_Attribute 0x0032 098 098 000 Old_age Always - 2 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x0022 072 051 045 Old_age Always - 471334940 194 Temperature_Celsius 0x0022 028 049 000 Old_age Always - 28 (Lifetime Min/Max 0/13) 195 Hardware_ECC_Recovered 0x001a 075 049 000 Old_age Always - 7931680 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 7 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 31 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 31 occurred at disk power-on lifetime: 9265 hours (386 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 a3 7b 04 4a e0 Error: UNC 163 sectors at LBA = 0x004a047b = 4850811 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 a3 7b 04 4a e0 00 00:00:53.238 READ DMA EXT 25 00 a4 7a 04 4a e0 00 00:01:18.202 READ DMA EXT 25 00 a5 79 04 4a e0 00 00:01:16.414 READ DMA EXT 25 00 a6 78 04 4a e0 00 00:01:14.634 READ DMA EXT 25 00 a7 77 04 4a e0 00 00:01:12.846 READ DMA EXT Error 30 occurred at disk power-on lifetime: 9265 hours (386 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 04 4a e0 Error: UNC at LBA = 0x004a047b = 4850811 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 a4 7a 04 4a e0 00 00:00:53.238 READ DMA EXT 25 00 a5 79 04 4a e0 00 00:00:51.459 READ DMA EXT 25 00 a6 78 04 4a e0 00 00:01:16.414 READ DMA EXT 25 00 a7 77 04 4a e0 00 00:01:14.634 READ DMA EXT 25 00 a8 76 04 4a e0 00 00:01:12.846 READ DMA EXT Error 29 occurred at disk power-on lifetime: 9265 hours (386 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 04 4a e0 Error: UNC at LBA = 0x004a047b = 4850811 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 a5 79 04 4a e0 00 00:00:53.238 READ DMA EXT 25 00 a6 78 04 4a e0 00 00:00:51.459 READ DMA EXT 25 00 a7 77 04 4a e0 00 00:00:49.671 READ DMA EXT 25 00 a8 76 04 4a e0 00 00:01:14.634 READ DMA EXT 25 00 a9 75 04 4a e0 00 00:01:12.846 READ DMA EXT Error 28 occurred at disk power-on lifetime: 9265 hours (386 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 04 4a e0 Error: UNC at LBA = 0x004a047b = 4850811 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 a6 78 04 4a e0 00 00:00:53.238 READ DMA EXT 25 00 a7 77 04 4a e0 00 00:00:51.459 READ DMA EXT 25 00 a8 76 04 4a e0 00 00:00:49.671 READ DMA EXT 25 00 a9 75 04 4a e0 00 00:00:47.892 READ DMA EXT 25 00 aa 74 04 4a e0 00 00:01:12.846 READ DMA EXT Error 27 occurred at disk power-on lifetime: 9265 hours (386 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 04 4a e0 Error: UNC at LBA = 0x004a047b = 4850811 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 a7 77 04 4a e0 00 00:00:53.238 READ DMA EXT 25 00 a8 76 04 4a e0 00 00:00:51.459 READ DMA EXT 25 00 a9 75 04 4a e0 00 00:00:49.671 READ DMA EXT 25 00 aa 74 04 4a e0 00 00:00:47.892 READ DMA EXT 25 00 ab 73 04 4a e0 00 00:00:46.112 READ DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@localhost ~]# fdisk -l Диск /dev/hdd: 250.0 ГБ, 250059350016 байт 255 heads, 63 sectors/track, 30401 cylinders Единицы = цилиндры по 16065 * 512 = 8225280 байт Устр-во Загр Начало Конец Блоки Id Система /dev/hdd1 1 30401 244196001 83 Linux [root@localhost ~]#