$ cat /var/log/dmesg [ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262064 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262064 [ 0.000000] On node 0 totalpages: 262064 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32433 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FA850 checksum 0 [ 0.000000] ACPI: RSDP 000FA850, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 3FFB0100, 0044 (r1 A M I OEMXSDT 11000620 MSFT 97) [ 0.000000] ACPI: FACP 3FFB0290, 00F4 (r3 A M I OEMFACP 11000620 MSFT 97) [ 0.000000] ACPI: DSDT 3FFB0440, 49B0 (r1 A0710 A0710000 0 INTL 2002026) [ 0.000000] ACPI: FACS 3FFBE000, 0040 [ 0.000000] ACPI: APIC 3FFB0390, 0068 (r1 A M I OEMAPIC 11000620 MSFT 97) [ 0.000000] ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 11000620 MSFT 97) [ 0.000000] ACPI: OEMB 3FFBE040, 0046 (r1 A M I AMI_OEM 11000620 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:7 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260017 [ 0.000000] Kernel command line: root=UUID=52f849ed-ceb0-4a0c-abcb-f4ba913e7f88 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] mapped IOAPIC to ffffb000 (fecc0000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2194.894 MHz processor. [ 24.586226] Console: colour VGA+ 80x25 [ 24.586950] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.587466] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.609753] Memory: 1027628k/1048256k available (2015k kernel code, 19912k reserved, 915k data, 364k init, 130752k highmem) [ 24.609762] virtual kernel memory layout: [ 24.609763] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 24.609765] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.609766] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.609767] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.609768] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 24.609769] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) [ 24.609770] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) [ 24.609773] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.609805] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 24.689737] Calibrating delay using timer specific routine.. 4392.19 BogoMIPS (lpj=8784389) [ 24.689765] Security Framework v1.0.0 initialized [ 24.689772] SELinux: Disabled at boot. [ 24.689786] Mount-cache hash table entries: 512 [ 24.689935] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [ 24.689943] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.689945] CPU: L2 Cache: 1024K (64 bytes/line) [ 24.689948] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 [ 24.689960] Compat vDSO mapped to ffffe000. [ 24.689973] Checking 'hlt' instruction... OK. [ 24.705908] SMP alternatives: switching to UP code [ 24.706230] Freeing SMP alternatives: 11k freed [ 24.706538] Early unpacking initramfs... done [ 24.972130] ACPI: Core revision 20070126 [ 24.972198] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 24.974059] CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01 [ 24.974078] Total of 1 processors activated (4392.19 BogoMIPS). [ 24.974272] ENABLING IO-APIC IRQs [ 24.974446] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 25.121283] Brought up 1 CPUs [ 25.121381] Booting paravirtualized kernel on bare hardware [ 25.121469] Time: 23:39:19 Date: 03/09/108 [ 25.121487] NET: Registered protocol family 16 [ 25.121554] EISA bus registered [ 25.121570] ACPI: bus type pci registered [ 25.122342] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 25.122344] PCI: Using configuration type 1 [ 25.122346] Setting up standard PCI resources [ 25.129151] ACPI: EC: Look up EC in DSDT [ 25.132435] ACPI: Interpreter enabled [ 25.132437] ACPI: (supports S0 S1 S3 S4 S5) [ 25.132449] ACPI: Using IOAPIC for interrupt routing [ 25.138242] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.138250] PCI: Probing PCI hardware (bus 00) [ 25.139541] PCI: Transparent bridge - 0000:00:13.1 [ 25.139595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.139714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 25.139773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] [ 25.139857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 25.139914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 25.139977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] [ 25.152621] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 25.152709] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 25.152795] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 25.152880] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 25.152966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.153053] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.153139] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.153239] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 25.153301] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.153310] pnp: PnP ACPI init [ 25.153315] ACPI: bus type pnp registered [ 25.155691] pnp: PnP ACPI: found 12 devices [ 25.155693] ACPI: ACPI bus type pnp unregistered [ 25.155696] PnPBIOS: Disabled by ACPI PNP [ 25.155733] PCI: Using ACPI for IRQ routing [ 25.155736] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.155740] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 [ 25.171122] NET: Registered protocol family 8 [ 25.171124] NET: Registered protocol family 20 [ 25.171167] pnp: 00:06: ioport range 0x290-0x297 has been reserved [ 25.171171] pnp: 00:07: iomem range 0xff300000-0xff3fffff has been reserved [ 25.171175] pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 25.171178] pnp: 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 25.171182] pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 25.171185] pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 25.171188] pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 25.171190] pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 25.171193] pnp: 00:0b: iomem range 0x100000-0x3fffffff could not be reserved [ 25.173193] Time: tsc clocksource has been installed. [ 25.201360] PCI: Bridge: 0000:00:01.0 [ 25.201361] IO window: disabled. [ 25.201365] MEM window: disabled. [ 25.201368] PREFETCH window: disabled. [ 25.201372] PCI: Bridge: 0000:00:02.0 [ 25.201373] IO window: disabled. [ 25.201377] MEM window: f9f00000-fbffffff [ 25.201381] PREFETCH window: d0000000-dfffffff [ 25.201385] PCI: Bridge: 0000:00:03.0 [ 25.201387] IO window: disabled. [ 25.201391] MEM window: disabled. [ 25.201394] PREFETCH window: disabled. [ 25.201398] PCI: Bridge: 0000:00:13.0 [ 25.201399] IO window: disabled. [ 25.201403] MEM window: disabled. [ 25.201405] PREFETCH window: disabled. [ 25.201409] PCI: Bridge: 0000:00:13.1 [ 25.201411] IO window: e000-efff [ 25.201415] MEM window: disabled. [ 25.201417] PREFETCH window: disabled. [ 25.201431] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 25.201446] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16 [ 25.201451] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.201464] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 17 [ 25.201469] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.201479] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 25.201488] PCI: Setting latency timer of device 0000:00:13.1 to 64 [ 25.201500] NET: Registered protocol family 2 [ 25.241156] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.241322] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 25.243342] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.244029] TCP: Hash tables configured (established 131072 bind 65536) [ 25.244031] TCP reno registered [ 25.253249] checking if image is initramfs... it is [ 25.704592] Switched to high resolution mode on CPU 0 [ 25.773692] Freeing initrd memory: 7043k freed [ 25.774083] audit: initializing netlink socket (disabled) [ 25.774097] audit(1207784359.960:1): initialized [ 25.774156] highmem bounce pool size: 64 pages [ 25.775383] VFS: Disk quotas dquot_6.5.1 [ 25.775419] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.775492] io scheduler noop registered [ 25.775494] io scheduler anticipatory registered [ 25.775495] io scheduler deadline registered [ 25.775506] io scheduler cfq registered (default) [ 25.775520] PCI: VIA PCI bridge detected. Disabling DAC. [ 25.775588] Boot video device is 0000:02:00.0 [ 25.775665] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.775703] assign_interrupt_mode Found MSI capability [ 25.775705] Allocate Port Service[0000:00:02.0:pcie00] [ 25.775727] Allocate Port Service[0000:00:02.0:pcie02] [ 25.775794] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 25.775830] assign_interrupt_mode Found MSI capability [ 25.775832] Allocate Port Service[0000:00:03.0:pcie00] [ 25.775852] Allocate Port Service[0000:00:03.0:pcie02] [ 25.775977] isapnp: Scanning for PnP cards... [ 26.129548] isapnp: No Plug & Play device found [ 26.148276] Real Time Clock Driver v1.12ac [ 26.148375] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.148557] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 26.148974] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 26.149481] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.149629] input: Macintosh mouse button emulation as /class/input/input0 [ 26.149707] PNP: No PS/2 controller found. Probing ports directly. [ 26.150054] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.150059] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 26.150174] mice: PS/2 mouse device common for all mice [ 26.150254] EISA: Probing bus 0 at eisa.0 [ 26.150291] EISA: Detected 0 cards. [ 26.150445] TCP cubic registered [ 26.150462] NET: Registered protocol family 1 [ 26.150482] Using IPI No-Shortcut mode [ 26.150661] Magic number: 4:237:706 [ 26.151241] Freeing unused kernel memory: 364k freed [ 27.335561] AppArmor: AppArmor initialized<5>audit(1207784361.460:2): type=1505 info="AppArmor initialized" pid=1226 [ 27.340783] fuse init (API version 7.8) [ 27.345573] Failure registering capabilities with primary security module. [ 27.353887] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 27.353891] ACPI: Processor [CPU1] (supports 16 throttling states) [ 27.353901] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 27.881039] SCSI subsystem initialized [ 27.884483] libata version 2.21 loaded. [ 27.885389] sata_via 0000:00:0f.0: version 2.2 [ 27.885412] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 18 [ 27.885456] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 27.885509] scsi0 : sata_via [ 27.885545] scsi1 : sata_via [ 27.885740] ata1: SATA max UDMA/133 cmd 0x0001d800 ctl 0x0001d402 bmdma 0x0001c400 irq 18 [ 27.885743] ata2: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001c802 bmdma 0x0001c408 irq 18 [ 27.903748] usbcore: registered new interface driver usbfs [ 27.903770] usbcore: registered new interface driver hub [ 27.903786] usbcore: registered new device driver usb [ 27.920229] USB Universal Host Controller Interface driver v3.0 [ 27.954164] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 28.085693] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.552000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.560000] Time: acpi_pm clocksource has been installed. [ 3.560000] ata1.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133 [ 3.560000] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.576000] ata1.00: configured for UDMA/133 [ 3.780000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.120000] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB01, max UDMA/100 [ 4.292000] ata2.00: configured for UDMA/100 [ 4.292000] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5 [ 4.292000] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB01 PQ: 0 ANSI: 5 [ 4.296000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 4.296000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 4.296000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 4.296000] VP_IDE: chipset revision 7 [ 4.296000] VP_IDE: not 100% native mode: will probe irqs later [ 4.296000] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 4.296000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio [ 4.296000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio [ 4.296000] Probing IDE interface ide0... [ 4.320000] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 4.320000] sd 0:0:0:0: [sda] Write Protect is off [ 4.320000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.320000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.320000] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 4.320000] sd 0:0:0:0: [sda] Write Protect is off [ 4.320000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.320000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.320000] sda: sda1 sda2 sda3 sda4 [ 4.360000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.364000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.364000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.372000] sr0: scsi3-mmc drive: 94x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.372000] Uniform CD-ROM driver Revision: 3.20 [ 4.372000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.612000] Attempting manual resume [ 4.612000] swsusp: Resume From Partition 8:3 [ 4.612000] PM: Checking swsusp image. [ 4.612000] PM: Resume from disk failed. [ 4.652000] kjournald starting. Commit interval 5 seconds [ 4.656000] EXT3-fs: mounted filesystem with ordered data mode. [ 4.868000] Probing IDE interface ide1... [ 5.436000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 5.436000] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 5.436000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 5.436000] uhci_hcd 0000:00:10.0: irq 19, io base 0x0000b800 [ 5.436000] usb usb1: configuration #1 chosen from 1 choice [ 5.436000] hub 1-0:1.0: USB hub found [ 5.436000] hub 1-0:1.0: 2 ports detected [ 5.540000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 20 [ 5.540000] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 5.540000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 5.540000] uhci_hcd 0000:00:10.1: irq 20, io base 0x0000b400 [ 5.540000] usb usb2: configuration #1 chosen from 1 choice [ 5.540000] hub 2-0:1.0: USB hub found [ 5.540000] hub 2-0:1.0: 2 ports detected [ 5.644000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 18 [ 5.644000] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 5.644000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 5.644000] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000b000 [ 5.644000] usb usb3: configuration #1 chosen from 1 choice [ 5.644000] hub 3-0:1.0: USB hub found [ 5.644000] hub 3-0:1.0: 2 ports detected [ 5.748000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 21 [ 5.748000] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 5.748000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 5.748000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000a800 [ 5.748000] usb usb4: configuration #1 chosen from 1 choice [ 5.748000] hub 4-0:1.0: USB hub found [ 5.748000] hub 4-0:1.0: 2 ports detected [ 5.780000] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 5.852000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18 [ 5.852000] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 5.852000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 5.852000] ehci_hcd 0000:00:10.4: irq 18, io mem 0xf9effc00 [ 5.936000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.936000] usb usb5: configuration #1 chosen from 1 choice [ 5.936000] hub 5-0:1.0: USB hub found [ 5.936000] hub 5-0:1.0: 8 ports detected [ 6.040000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 21 [ 6.040000] eth0: VIA Rhine II at 0x1a400, 00:18:f3:0c:35:e8, IRQ 21. [ 6.040000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. [ 6.344000] usb 1-1: device not accepting address 2, error -71 [ 8.384000] usb 5-6: new high speed USB device using ehci_hcd and address 6 [ 8.544000] usb 5-6: configuration #1 chosen from 1 choice [ 8.788000] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 8.960000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 8.964000] usb 2-1: configuration #1 chosen from 1 choice [ 9.208000] usb 1-1: new low speed USB device using uhci_hcd and address 4 [ 9.760000] usb 1-1: configuration #1 chosen from 1 choice [ 10.024000] usb 1-2: new full speed USB device using uhci_hcd and address 5 [ 10.056000] Linux agpgart interface v0.102 (c) Dave Jones [ 10.060000] agpgart: Detected AGP bridge 0 [ 10.064000] agpgart: AGP aperture is 128M @ 0xf0000000 [ 10.144000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.148000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.216000] usb 1-2: configuration #1 chosen from 1 choice [ 10.460000] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 10.632000] usb 3-1: configuration #1 chosen from 1 choice [ 11.704000] nvidia: module license 'NVIDIA' taints kernel. [ 11.968000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) -> IRQ 22 [ 11.968000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 11.968000] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 12.020000] input: PC Speaker as /class/input/input1 [ 12.040000] parport_pc 00:05: reported by Plug and Play ACPI [ 12.040000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 12.076000] lirc_dev: IR Remote Control driver registered, at major 61 [ 12.076000] [ 12.076000] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.33 $ [ 12.076000] lirc_mceusb2: Daniel Melander , Martin Blatter [ 12.192000] usb 3-1: reset full speed USB device using uhci_hcd and address 2 [ 12.340000] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 12.344000] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2 [ 12.344000] usbcore: registered new interface driver lirc_mceusb2 [ 12.344000] usbcore: registered new interface driver libusual [ 12.344000] usbcore: registered new interface driver hiddev [ 12.352000] Initializing USB Mass Storage driver... [ 12.352000] scsi2 : SCSI emulation for USB Mass Storage devices [ 12.352000] usb-storage: device found at 6 [ 12.352000] usb-storage: waiting for device to settle before scanning [ 12.368000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x043D pid 0x0078 [ 12.368000] usbcore: registered new interface driver usblp [ 12.368000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 12.380000] input: Logitech Logitech Dual Action as /class/input/input2 [ 12.380000] input: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:10.1-1 [ 12.524000] input: PATEN USB/PS2 Combo Receiver as /class/input/input3 [ 12.524000] input: USB HID v1.10 Keyboard [PATEN USB/PS2 Combo Receiver] on usb-0000:00:10.0-1 [ 12.656000] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 16 (level, low) -> IRQ 23 [ 12.740000] input: PATEN USB/PS2 Combo Receiver as /class/input/input4 [ 12.740000] input: USB HID v1.10 Device [PATEN USB/PS2 Combo Receiver] on usb-0000:00:10.0-1 [ 12.864000] input: PATEN USB/PS2 Combo Receiver as /class/input/input5 [ 12.864000] input: USB HID v1.10 Mouse [PATEN USB/PS2 Combo Receiver] on usb-0000:00:10.0-1 [ 12.864000] usbcore: registered new interface driver usbhid [ 12.864000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 12.868000] usbcore: registered new interface driver usb-storage [ 12.868000] USB Mass Storage support registered. [ 12.868000] usbcore: registered new interface driver xpad [ 12.868000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6 [ 13.740000] lp0: using parport0 (interrupt-driven). [ 13.784000] Adding 6434024k swap on /dev/sda3. Priority:-1 extents:1 across:6434024k [ 14.200000] EXT3 FS on sda2, internal journal [ 14.696000] kjournald starting. Commit interval 5 seconds [ 14.696000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 14.696000] EXT3 FS on sda4, internal journal [ 14.696000] EXT3-fs: mounted filesystem with ordered data mode.