>>> virtual console started for client 00.02.55.54.45.3A <<< gathering previous messages... Linux version 2.6.18-boel_v3.7.5 (root@oscar1.ussg.indiana.edu) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Thu Oct 19 18:06:46 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec340 (usable) BIOS-e820: 000000003ffec340 - 000000003fff0000 (ACPI data) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009e1d0 On node 0 totalpages: 262124 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32748 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 IBM ) @ 0x000fdfd0 ACPI: RSDT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffeff80 ACPI: FADT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffeff00 ACPI: MADT (v001 IBM SERSPIDR 0x00001000 IBM 0x45444f43) @ 0x3ffefe80 ACPI: DSDT (v001 IBM SERSPIDR 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4e8 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 30 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Detected 864.010 MHz processor. Built 1 zonelists. Total pages: 262124 Kernel command line: vga=extended initrd=initrd.img root=/dev/ram MONITOR_SERVER=192.168.1.100 MONITOR_CONSOLE=yes BOOT_IMAGE=kernel mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec01000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1026584k/1048496k available (2856k kernel code, 21240k reserved, 1024k data, 336k init, 130992k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1728.78 BogoMIPS (lpj=3457560) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Intel Pentium III (Coppermine) stepping 06 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 7760k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:01.0 PCI: Firmware left 0000:00:0a.0 e100 interrupts enabled, disabling ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LPE1] (IRQs *10) ACPI: PCI Interrupt Link [LPE2] (IRQs *10) ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LPVI] (IRQs) *0, disabled. ACPI: PCI Interrupt Link [LPUS] (IRQs *7) ACPI: PCI Root Bridge [PCI1] (0000:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Link [LPSA] (IRQs *9) ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled. ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled. ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP2A] (IRQs) *0, disabled. ACPI: Blank IRQ resource ACPI: Resource is not an IRQ entry ACPI: PCI Interrupt Link [LP2B] (IRQs) *0, disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. highmem bounce pool size: 64 pages Initializing Cryptographic API io scheduler noop registered io scheduler deadline registered (default) ACPI: Power Button (FF) [PWRF] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. Intel(R) PRO/10GbE Network Driver - version 1.0.109-k2 Copyright (c) 1999-2006 Intel Corporation. dgrs: SW=$Id: dgrs.c,v 1.13 2000/06/06 04:07:00 rick Exp $ FW=Build 550 11/16/96 03:45:15 FW Version=$Version$ pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16 eth0: 0000:00:02.0, 00:02:55:54:45:3A, IRQ 16. Board assembly 754338-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 25 (level, low) -> IRQ 17 eth1: 0000:00:0a.0, 00:02:55:54:45:3B, IRQ 17. Board assembly 754338-001, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ThunderLAN driver v1.15 TLAN: 0 devices installed, PCI: 0 EISA: 0 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. Uhhuh. NMI received for unknown reason 35 on CPU 0. Dazed and confused, but trying to continue Do you have a strange power saving mode enabled? cs89x0:cs89x0_probe(0x0) PP_addr at 300[a]: 0xffff eth2: incorrect signature at 300[c]: 0xffff!=0x630E PP_addr at 320[a]: 0xffff eth2: incorrect signature at 320[c]: 0xffff!=0x630E PP_addr at 340[a]: 0xffff eth2: incorrect signature at 340[c]: 0xffff!=0x630E PP_addr at 360[a]: 0xffff eth2: incorrect signature at 360[c]: 0xffff!=0x630E PP_addr at 200[a]: 0xffff eth2: incorrect signature at 200[c]: 0xffff!=0x630E PP_addr at 220[a]: 0xffff eth2: incorrect signature at 220[c]: 0xffff!=0x630E PP_addr at 240[a]: 0xffff eth2: incorrect signature at 240[c]: 0xffff!=0x630E PP_addr at 260[a]: 0xffff eth2: incorrect signature at 260[c]: 0xffff!=0x630E PP_addr at 280[a]: 0xffff eth2: incorrect signature at 280[c]: 0xffff!=0x630E PP_addr at 2a0[a]: 0xffff eth2: incorrect signature at 2a0[c]: 0xffff!=0x630E PP_addr at 2c0[a]: 0xffff eth2: incorrect signature at 2c0[c]: 0xffff!=0x630E PP_addr at 2e0[a]: 0xffff eth2: incorrect signature at 2e0[c]: 0xffff!=0x630E cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP Trying to free nonexistent resource <0000000000000000-0000000000000010> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. depca: probe of depca.0 failed with error -16 eth%d: i82596 initialization timed out myri10ge: Version 1.0.0 dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker http://www.scyld.com/network/drivers.html uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) Intel ISA PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver kaweth pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new driver pegasus serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI Shortcut mode RAMDISK: Compressed image found at block 0 Time: tsc clocksource has been installed. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 336k freed input: AT Translated Set 2 keyboard as /class/input/input0 Uhhuh. NMI received for unknown reason 35 on CPU 0. Dazed and confused, but trying to continue Do you have a strange power saving mode enabled? mount_proc monitor_save_dmesg mount_sys mount_pts get_arch adjust_arch ifconfig_loopback load_my_modules start_udevd bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting kernel event manager... ...done. bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Loading hardware drivers... ...done. start_hotplug bin dev etc lib linuxrc my_modules old_root proc root sbin sys tmp usr var Starting hotplug subsystem... ...done. variableize_kernel_append_parameters read_kernel_append_parameters read_local_cfg Checking for floppy diskette. YOU MAY SEE SOME "wrong magic" ERRORS HERE, AND THAT IS NORMAL. No floppy diskette in drive. read_kernel_append_parameters start_network IP Address not set with pre-boot settings. sleep 0: This is to give your switch (if you're using one) time to recognize your ethernet card before we try the network. Tip: You can use + to pass the time (pun intended). modprobe: could not parse modules.dep dhclient Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html Listening on LPF/lo/ Sending on LPF/lo/ Listening on LPF/eth1/00:02:55:54:45:3b Sending on LPF/eth1/00:02:55:54:45:3b Listening on LPF/eth0/00:02:55:54:45:3a Sending on LPF/eth0/00:02:55:54:45:3a Sending on Socket/fallback/fallback-net DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPOFFER from 192.168.1.100 DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 9 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.1.100 Using DHCP server (very deprecated) as IMAGESERVER: 192.168.1.100 bound to 192.168.1.1 -- renewal in 21600 seconds. Overriding any DHCP settings with pre-boot settings from kernel append parameters. read_kernel_append_parameters ping_test Pinging your SystemImager server to ensure we have network connectivity. PING ATTEMPT 1: PING 192.168.1.100 (192.168.1.100): 56 data bytes 84 bytes from 192.168.1.100: icmp_seq=0 ttl=64 time=18.5 ms --- 192.168.1.100 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 18.5/18.5/18.5 ms We have connectivity to your SystemImager server! Monitoring initialized. start_syslogd get_boel_binaries_tarball rsync -av 192.168.1.100::boot/i386/standard/boel_binaries.tar.gz /tmp/boel_binaries receiving file list ... done boel_binaries.tar.gz sent 120 bytes received 5428165 bytes 10856570.00 bytes/sec total size is 5427378 speedup is 1.00 tmpfs_watcher get_scripts_directory rsync -a 192.168.1.100::scripts/ /scripts/ autodetect_hardware_and_load_modules Detecting hardware: e100 e100 serverworks aic7xxx usb-ohci Loading sd_mod... done! Loading ide-disk... done! Loading e100... not needed or already loaded. Loading e100... not needed or already loaded. Loading serverworks... done! Loading aic7xxx... done! Loading usb-ohci... not needed or already loaded. get_hostname_by_hosts_file Hosts file exists... Searching for this machine's hostname in /scripts/hosts by IP: 192.168.1.1 This hosts name is: gnome01 run_pre_install_scripts >>> 99all.harmless_example_script I live in /var/lib/systemimager/scripts/pre-install. choose_autoinstall_script Using autoinstall script: /scripts/gnome01.sh write_variables run_autoinstall_script >>> /scripts/gnome01.sh get_arch enumerate_disks sda DISKS=1 Partitioning /dev/sda... Old partition table for /dev/sda: Disk geometry for /dev/sda: 0kB - 9100MB Disk label type: msdos Number Start End Size Type File system Flags 1 1kB 100MB 100MB primary ext3 boot 2 100MB 9100MB 9000MB extended 5 100MB 612MB 512MB logical linux-swap 6 612MB 9100MB 8488MB logical ext3 dd if=/dev/zero of=/dev/sda bs=512 count=1 || shellout 1+0 records in 1+0 records out blockdev --rereadpt /dev/sda parted -s -- /dev/sda mklabel msdos || shellout Creating partition /dev/sda1. parted -s -- /dev/sda mkpart primary 0 100 || shellout parted -s -- /dev/sda set 1 boot on Creating partition /dev/sda2. parted -s -- /dev/sda mkpart extended 100 9100 || shellout Creating partition /dev/sda5. parted -s -- /dev/sda mkpart logical 100 612 || shellout Creating partition /dev/sda6. parted -s -- /dev/sda mkpart logical 612 9100 || shellout New partition table for /dev/sda: parted -s -- /dev/sda print Disk geometry for /dev/sda: 0kB - 9100MB Disk label type: msdos Number Start End Size Type File system Flags 1 1kB 100MB 100MB primary ext3 boot 2 100MB 9100MB 9000MB extended 5 100MB 612MB 512MB logical linux-swap 6 612MB 9100MB 8488MB logical ext3 Load software RAID modules. insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists modprobe: module raid5 not found. modprobe: failed to load module raid5 modprobe: module raid6 not found. modprobe: failed to load module raid6 insmod: cannot insert `/lib/modules/2.6.18-boel_v3.7.5/kernel/drivers/md/md-mod.ko': File exists (-1): File exists Load device mapper driver (for LVM). Load additional filesystem drivers. modprobe: module fat not found. modprobe: failed to load module fat modprobe: module vfat not found. modprobe: failed to load module vfat mke2fs -j /dev/sda6 || shellout mke2fs 1.38 (30-Jun-2005) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 1036288 inodes, 2072355 blocks 103617 blocks (5.00%) reserved for the super user First data block=0 64 block groups 32768 blocks per group, 32768 fragments per group 16192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: 0/64 1/64 2/64 3/64 4/64 5/64 6/64 7/64 8/64 9/6410/6411/6412/6413/6414/6415/6416/6417/6418/6419/6420/6421/6422/6423/6424/6425/6426/6427/6428/6429/6430/6431/6432/6433/6434/6435/6436/6437/6438/6439/6440/6441/6442/6443/6444/6445/6446/6447/6448/6449/6450/6451/6452/6453/6454/6455/6456/6457/6458/6459/6460/6461/6462/6463/64done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 32 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. mkdir -p /a/ || shellout mount /dev/sda6 /a/ -t ext3 -o defaults || shellout mkswap -v1 /dev/sda5 || shellout Setting up swapspace version 1, size = 511991 kB no label, UUID=dd5d3897-892f-4145-9e36-fcd1c03ebd91 swapon /dev/sda5 || shellout mke2fs -j /dev/sda1 || shellout mke2fs 1.38 (30-Jun-2005) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 24480 inodes, 97656 blocks 4882 blocks (5.00%) reserved for the super user First data block=1 12 block groups 8192 blocks per group, 8192 fragments per group 2040 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729 Writing inode tables: 0/12 1/12 2/12 3/12 4/12 5/12 6/12 7/12 8/12 9/1210/1211/12done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 36 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. mkdir -p /a/boot || shellout mount /dev/sda1 /a/boot -t ext3 -o defaults || shellout mkdir -p /a/proc || shellout mount proc /a/proc -t proc -o defaults || shellout mkdir -p /a/sys || shellout mount sysfs /a/sys -t sysfs -o defaults || shellout Evaluating image size. Report task started. Quietly installing image... /rsync -aHS --exclude=lost+found/ --exclude=/proc/* --numeric-ids 192.168.1.100::oscarimage/ /a/ /var/log/systemimager/rsyncd: 2008/04/11 15:45:50 [31930] rsync on boot/i386/standard/boel_binaries.tar.gz from gnome01.internal.net (192.168.1.1) 2008/04/11 21:45:51 [31930] wrote 5428165 bytes read 120 bytes total size 5427378 2008/04/11 15:45:53 [31931] rsync on scripts/ from gnome01.internal.net (192.168.1.1) 2008/04/11 21:45:53 [31931] wrote 54000 bytes read 231 bytes total size 52705 2008/04/11 15:46:27 [31689] rsync: writefd_unbuffered failed to write 4096 bytes: phase "unknown" [sender]: Connection reset by peer (104) 2008/04/11 15:46:27 [31689] rsync error: error in rsync protocol data stream (code 12) at io.c(909) 2008/04/11 15:46:31 [31940] rsync on oscarimage from gnome01.internal.net (192.168.1.1) 2008/04/11 15:46:34 [31940] wrote 862445 bytes read 77 bytes total size 868042739 2008/04/11 15:46:36 [31941] rsync on oscarimage/ from gnome01.internal.net (192.168.1.1) TYPESCRIPT: Script started on Fri 11 Apr 2008 03:33:16 PM CST --> Setting env variable OSCAR_UI to gui Checking your system... Success: ssh-check.pl Success: su-check.pl Success: selinux-check.pl Success: debrepo-check.pl Success: network-check.pl System checked ============================================================================= == Running OSCAR install_cluster script Fri Apr 11 15:33:17 CST 2008 ============================================================================= --> Checking if this is a supported platform --> Running: "cd /opt/oscar/oscar-5.0/scripts && ./wizard_prep" ============================================================================= == Running OSCAR wizard_prep script ============================================================================= --> Bootstrapping OSCAR smart package manager --> Checking OSCAR repositories existence. smartly removing: tftp-server.i?86,lam smartly installing: dhcp,gd,nfs-utils,openssh,openssh-clients,openssh-server,openssl,tcpdump,xinetd,httpd,ph p,expat,python,zlib,zlib-devel,shadow-utils,libcap,ntp Cleaning up Everything 0 headers removed 0 packages removed 0 metadata files removed 0 cache files removed 0 cache files removed --> Installing OSCAR wizard prerequisites --> Locating _all_ OSCAR packages --> Making sure there is an ODA database password Checking for ODA database password file ... found. Checking for proper ownership and permissions ... correct. Reading password from file /etc/odapw ... done. --> Successfully ran OSCAR wizard_prep script --> Successfully ran wizard_prep ============================================================================= == Prerequisites installed ============================================================================= --> OSCAR version: 5.0 --> Command line invocation: ./install_cluster eth0 --> Hostname: gnome --> DNS domain name: internal.net --> Network interface: eth0 --> Linux distribution: redhat-el-es 4 --> Kernel version: 2.6.9-67.EL --> Architecture: i386 --> Running in directory: /opt/oscar/oscar-5.0 --> PATH: /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11 R6/bin:/opt/env-switcher/bin:/opt/pvm3/lib:/opt/pvm3/lib/LINUX:/opt/pvm3/bin/LINUX:/opt/pbs/bin:/opt/pbs/lib/xpbs/bi n:/opt/c3-4/:/root/bin:/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin --> Running: "./oscar_wizard install" ============================================================================= == Running step 6 of the OSCAR wizard: Setup networking ============================================================================= Stopping Flamethrower daemon: flamethrowerd Stopping SystemImager's BitTorrent Transport: systemimager-server-bittorrent... stopped. Stopping rsync daemon for systemimager: rsync. Starting rsync daemon for systemimager: rsync. --> Step 6: Successfully enabled installation mode: systemimager-rsync --> Step 6: Setup network boot: ./setup_pxe -v 2008-3-11 15:34:24 [main :: Line 249] Checking arguments. 2008-3-11 15:34:24 [main :: Line 110] Restarting xinetd Stopping xinetd: [ OK ] Starting xinetd: [ OK ] 2008-3-11 15:34:25 [main :: Line 112] Enabling tftp 2008-3-11 15:34:25 [main :: Line 116] Creating directories. 2008-3-11 15:34:25 [main :: Line 148] Getting pxelinux.0. 2008-3-11 15:34:25 [main :: Line 153] Copying default pxelinux.cfg file 2008-3-11 15:34:25 [main :: Line 157] Updating /tftpboot/pxelinux.cfg/default file to support si_monitor. 2008-3-11 15:34:25 [main :: Line 182] Copying SystemImager's message.txt to /tftpboot/pxelinux.cfg 2008-3-11 15:34:25 [main :: Line 228] Copying SystemImager standard boot kernel and initrd.img to /tftpboot 2008-3-11 15:34:25 [main :: Line 235] Symlinking SystemImager standard boot kernel and initrd.img to /tftpboot/kerne l and /tftpboot/initrd.img respectively --> Step 6: Successfully setup network boot tcpdump: no process killed --> Step 6: Stopped listening to network --> Step 6: Completed successfully Script done on Fri 11 Apr 2008 03:49:34 PM CST OSCAR INSTALL LOG: ============================================================================= == Running OSCAR install_cluster script Fri Apr 11 15:33:17 CST 2008 ============================================================================= --> Checking if this is a supported platform --> Running: "cd /opt/oscar/oscar-5.0/scripts && ./wizard_prep" ============================================================================= == Running OSCAR wizard_prep script ============================================================================= --> Bootstrapping OSCAR smart package manager --> Checking OSCAR repositories existence. smartly removing: tftp-server.i?86,lam smartly installing: dhcp,gd,nfs-utils,openssh,openssh-clients,openssh-server,openssl,tcpdump,xinetd,httpd,php,expat,python,zlib,zlib-devel,shadow-utils,libcap,ntp Cleaning up Everything 0 headers removed 0 packages removed 0 metadata files removed 0 cache files removed 0 cache files removed --> Installing OSCAR wizard prerequisites --> Locating _all_ OSCAR packages --> Making sure there is an ODA database password Checking for ODA database password file ... found. Checking for proper ownership and permissions ... correct. Reading password from file /etc/odapw ... done. --> Successfully ran OSCAR wizard_prep script --> Successfully ran wizard_prep ============================================================================= == Prerequisites installed ============================================================================= --> OSCAR version: 5.0 --> Command line invocation: ./install_cluster eth0 --> Hostname: gnome --> DNS domain name: internal.net --> Network interface: eth0 --> Linux distribution: redhat-el-es 4 --> Kernel version: 2.6.9-67.EL --> Architecture: i386 --> Running in directory: /opt/oscar/oscar-5.0 --> PATH: /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/opt/env-switcher/bin:/opt/pvm3/lib:/opt/pvm3/lib/LINUX:/opt/pvm3/bin/LINUX:/opt/pbs/bin:/opt/pbs/lib/xpbs/bin:/opt/c3-4/:/root/bin:/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin --> Running: "./oscar_wizard install" ============================================================================= == Running step 6 of the OSCAR wizard: Setup networking ============================================================================= Stopping Flamethrower daemon: flamethrowerd Stopping SystemImager's BitTorrent Transport: systemimager-server-bittorrent... stopped. Stopping rsync daemon for systemimager: rsync. Starting rsync daemon for systemimager: rsync. --> Step 6: Successfully enabled installation mode: systemimager-rsync --> Step 6: Setup network boot: ./setup_pxe -v 2008-3-11 15:34:24 [main :: Line 249] Checking arguments. 2008-3-11 15:34:24 [main :: Line 110] Restarting xinetd Stopping xinetd: [ OK ] Starting xinetd: [ OK ] 2008-3-11 15:34:25 [main :: Line 112] Enabling tftp 2008-3-11 15:34:25 [main :: Line 116] Creating directories. 2008-3-11 15:34:25 [main :: Line 148] Getting pxelinux.0. 2008-3-11 15:34:25 [main :: Line 153] Copying default pxelinux.cfg file 2008-3-11 15:34:25 [main :: Line 157] Updating /tftpboot/pxelinux.cfg/default file to support si_monitor. 2008-3-11 15:34:25 [main :: Line 182] Copying SystemImager's message.txt to /tftpboot/pxelinux.cfg 2008-3-11 15:34:25 [main :: Line 228] Copying SystemImager standard boot kernel and initrd.img to /tftpboot 2008-3-11 15:34:25 [main :: Line 235] Symlinking SystemImager standard boot kernel and initrd.img to /tftpboot/kernel and /tftpboot/initrd.img respectively --> Step 6: Successfully setup network boot tcpdump: no process killed --> Step 6: Stopped listening to network --> Step 6: Completed successfully --> Successfully ran oscar_wizard --> Successfully ran OSCAR install_cluster script